Investigation of surface topography and its deterioration resulting from tool wear evolution when dry turning of titanium alloy Ti-6Al-4V

Abstract Tool wear inevitably occurs in dry cutting titanium alloy Ti-6Al-4V, and it causes the machined surface deterioration. This research aimed to synthetically investigate surface topography characterization with emphasizing tool flank wear effects in dry turning titanium alloy Ti-6Al-4V. The surface analysis techniques including three dimension (3D) surface parameters and surface defects were implemented to assess surface topographies by using confocal laser scanning microscope and scanning electron microscope. A detailed comparison of 3D surface topography in terms of amplitude, spatial, hybrid, functional, and volume parameters was analyzed under various tool wear stages. The undesirable surface defects, such as feed marks, plowing grooves, side flow, plastic flow, and adhered material particles, surface tearing, surface burning, scratch marks were discussed on the basis of tool wear patterns and additional thermo-mechanical loads. Experimental findings indicated that a good correlation was presented between surface topography evolution and tool wear effects.

[1]  Chen Zhitong,et al.  Influence of cutting speed and tool wear on the surface integrity of the titanium alloy Ti-1023 during milling , 2015 .

[2]  Wit Grzesik,et al.  Modification of surface finish produced by hard turning using superfinishing and burnishing operations , 2012 .

[3]  Wit Grzesik,et al.  Comparison of surface textures produced by finish cutting, abrasive and burnishing operations in terms of their functional properties , 2013 .

[4]  Yuebin Guo,et al.  A comprehensive characterization of 3D surface topography induced by hard turning versus grinding , 2008 .

[5]  LN López de Lacalle,et al.  Detecting the key geometrical features and grades of carbide inserts for the turning of nickel-based alloys concerning surface integrity , 2016 .

[6]  L. N. López de Lacalle,et al.  Cryogenic and minimum quantity lubrication for an eco-efficiency turning of AISI 304 , 2016 .

[7]  M. Sadeghi,et al.  Investigation of surface roughness, microhardness and white layer thickness in hard milling of AISI 4340 using minimum quantity lubrication , 2016 .

[8]  S. Bruschi,et al.  On the tool wear mechanisms in dry and cryogenic turning Additive Manufactured titanium alloys , 2017 .

[9]  A. Jawaid,et al.  The effect of machining on surface integrity of titanium alloy Ti–6% Al–4% V , 2005 .

[10]  Matthew A. Davies,et al.  Recent advances in modelling of metal machining processes , 2013 .

[11]  D. Aspinwall,et al.  Tool life and workpiece surface integrity when turning an RR1000 nickel-based superalloy , 2018, The International Journal of Advanced Manufacturing Technology.

[12]  Enrico Filippi,et al.  Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining , 2015 .

[13]  Samad Nadimi Bavil Oliaei,et al.  Investigating the influence of built-up edge on forces and surface roughness in micro scale orthogonal machining of titanium alloy Ti6Al4V , 2016 .

[14]  W. Grzesik,et al.  Investigation of the tribological performance of AlTiN coated cutting tools in the machining of Ti6Al4V titanium alloy in terms of demanded tool life , 2018, Eksploatacja i Niezawodnosc - Maintenance and Reliability.

[15]  Keith Ridgway,et al.  Workpiece Surface Integrity and Tool Life Issues When Turning Inconel 718™ Nickel Based Superalloy , 2004 .

[16]  Kun-yang Lin,et al.  Surface integrity of milling in-situ TiB2 particle reinforced Al matrix composites , 2016 .

[17]  Jan-Eric Ståhl,et al.  An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools , 2012 .

[18]  Pedro J. Arrazola,et al.  Correlation between tool flank wear, force signals and surface integrity when turning bars of Inconel 718 in finishing conditions , 2014 .

[19]  D. Pimenov,et al.  Hybrid cooling-lubrication strategies to improve surface topography and tool wear in sustainable turning of Al 7075-T6 alloy , 2018, The International Journal of Advanced Manufacturing Technology.

[20]  Dong Yang,et al.  Surface topography analysis and cutting parameters optimization for peripheral milling titanium alloy Ti-6Al-4V , 2015 .

[21]  S. To,et al.  Relationships of tool wear characteristics to cutting mechanics, chip formation, and surface quality in ultra-precision fly cutting , 2016 .

[22]  Y. M. Shashidhara,et al.  Vegetable oils as a potential cutting fluid—An evolution , 2010 .

[23]  W. Grzesik,et al.  Investigation of tool wear in the turning of Inconel 718 superalloy in terms of process performance and productivity enhancement , 2018 .

[24]  Christopher Saldana,et al.  Advances in material and friction data for modelling of metal machining , 2017 .

[25]  A. Sadat Surface characteristics of machined Inconel-718 nickel-base superalloy using natural and controlled contact length tools , 1987 .

[26]  A. Velayudham,et al.  An experimental analysis and measurement of process performances in machining of nimonic C-263 super alloy , 2013 .

[27]  Zhanqiang Liu,et al.  Tool wear behaviors and corresponding machined surface topography during high-speed machining of Ti-6Al-4V with fine grain tools , 2018 .

[28]  Wit Grzesik,et al.  Influence of tool wear on surface roughness in hard turning using differently shaped ceramic tools , 2008 .

[29]  Farbod Akhavan Niaki,et al.  A comprehensive study on the effects of tool wear on surface roughness, dimensional integrity and residual stress in turning IN718 hard-to-machine alloy , 2017 .

[30]  S. To,et al.  A review of surface roughness generation in ultra-precision machining , 2015 .

[31]  Stefania Bruschi,et al.  Experimental investigation on the feasibility of dry and cryogenic machining as sustainable strategies when turning Ti6Al4V produced by Additive Manufacturing , 2017 .

[32]  M. Nouari,et al.  Surface integrity of dry machined titanium alloys , 2009 .

[33]  P. Feng,et al.  The influences of tool wear on Ti6Al4V cutting temperature and burn defect , 2016 .

[34]  Christopher Saldana,et al.  Surface integrity analysis of machined Inconel 718 over multiple length scales , 2012 .

[35]  Abdulkadir Güllü,et al.  Analysis of cutting parameters and cooling/lubrication methods for sustainable machining in turning of Haynes 25 superalloy , 2016 .

[36]  Zhanqiang Liu,et al.  A review on the progress towards improvement in surface integrity of Inconel 718 under high pressure and flood cooling conditions , 2017 .

[37]  Zhanqiang Liu,et al.  High-pressure coolant effect on the surface integrity of machining titanium alloy Ti-6Al-4V: a review , 2018 .

[38]  Mahmudur Rahman,et al.  An investigation of cutting forces and surface damage in high-speed turning of inconel 718 , 2007 .

[39]  S. Melkote,et al.  Effect of plastic side flow on surface roughness in micro-turning process , 2006 .

[40]  David K. Aspinwall,et al.  Machinability and surface integrity of RR1000 nickel based superalloy , 2011 .

[41]  Mohammadreza Shabgard,et al.  On the feasibility of a reduction in cutting fluid consumption via spray of biodegradable vegetable oil with compressed air in machining Inconel 706 , 2015 .

[42]  Bing Wang,et al.  State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: A review , 2019, Measurement.

[43]  Keith Ridgway,et al.  The Effect of Cutting Tool Material and Edge Geometry on Tool Life and Workpiece Surface Integrity , 2006 .

[44]  D. Aspinwall,et al.  Study on tool wear and workpiece surface integrity following drilling of CFRP laminates with variable feed rate strategy , 2018 .