A highly sensitive Mach–Zehnder interferometric refractive index sensor based on core-offset single mode fiber

Abstract A highly sensitive refractive index (RI) sensor based on all-fiber Mach–Zehnder interferometer (MZI) was simulated and demonstrated. It was fabricated by splicing a section of single mode fiber (SMF) between two SMFs with a slight core offset at two splicing joints, which were used to excite cladding modes and couple the core mode to cladding modes. And then the interference between the core and cladding modes was utilized to measure sounding RI and the sensitivity of the sensor was enhanced by tapering fiber. Experimental results showed that the measured RI sensitivity could be up to 78.7 nm/RIU in the range of 1.333–1.374. Meanwhile, the sensor has the advantages of simple structure, small size, high sensitivity and low cost.

[1]  Zhenhong Jia,et al.  High-Sensitivity Displacement Sensor Based on a Bent Fiber Mach–Zehnder Interferometer , 2013, IEEE Photonics Technology Letters.

[2]  P. Hambley,et al.  Theoretical, Numerical, and Experimental Analysis of Optical Fiber Tapering , 2007, Journal of Lightwave Technology.

[3]  X. Bao,et al.  Simultaneous refractive index and temperature measurements using a tapered bend-resistant fiber interferometer. , 2012, Optics letters.

[4]  Xiaoyi Bao,et al.  Highly sensitive in-fiber interferometric refractometer with temperature and axial strain compensation. , 2013, Optics express.

[5]  Qiang Wu,et al.  High sensitivity SMS fiber structure based refractometer--analysis and experiment. , 2011, Optics express.

[6]  Wei Wang,et al.  Simultaneous measurement of refractive index and temperature based on a core-offset Mach–Zehnder interferometer combined with a fiber Bragg grating , 2014 .

[7]  Chi Chiu Chan,et al.  Simultaneous strain and temperature measurement based on a photonic crystal fiber modal-interference interacting with a long period fiber grating , 2012 .

[8]  Zhaobing Tian,et al.  In-Line Single-Mode Optical Fiber Interferometric Refractive Index Sensors , 2009, Journal of Lightwave Technology.

[9]  Tingting Han,et al.  Intermodal interferometer based on a fluid-filled two-mode photonic crystal fiber for sensing applications. , 2013, Applied optics.

[10]  Zhaobing Tian,et al.  Single-Mode Fiber Refractive Index Sensor Based on Core-Offset Attenuators , 2008, IEEE Photonics Technology Letters.

[11]  Deming Liu,et al.  Highly sensitive curvature sensor based on single-mode fiber using core-offset splicing , 2014 .

[12]  Xiujuan Yu,et al.  Characteristics of in-fiber Mach-Zehnder interferometer formed by lateral offset splicing , 2012, Photonics Asia.

[13]  S. Yam,et al.  In-Line Abrupt Taper Optical Fiber Mach–Zehnder Interferometric Strain Sensor , 2009, IEEE Photonics Technology Letters.

[14]  Youngjoo Chung,et al.  Twin core photonic crystal fiber for in-line Mach-Zehnder interferometric sensing applications. , 2009, Optics express.

[15]  Yuliya Semenova,et al.  A comprehensive analysis verified by experiment of a refractometer based on an SMF28–small-core singlemode fiber (SCSMF)–SMF28 fiber structure , 2011 .

[16]  Xiaoyi Bao,et al.  In-fiber Mach–Zehnder interferometric refractive index sensors with guided and leaky modes , 2015 .

[17]  H. Tsai,et al.  High sensitivity of taper-based Mach-Zehnder interferometer embedded in a thinned optical fiber for refractive index sensing. , 2011, Applied optics.

[18]  Y. Semenova,et al.  A novel highly sensitive optical fiber microphone based on single mode–multimode–single mode structure , 2011 .