Gas Slug Microfluidics: A Unique Tool for Ultrafast, Highly Controlled Growth of Iron Oxide Nanostructures

The use of nanomaterials in real life applications is often hampered by our inability to produce them in large quantities while preserving their desired properties in terms of size, shape, and crystalline phase. Here we present a novel continuous method to synthesize nanostructures with an unprecedented degree of control regarding their properties. In particular, the excellent properties of microreactors for chemical synthesis are enhanced by the introduction of gas slugs of tailored composition. Slug dynamics accelerate mixing, reduce processing times (from hours in batch processes to minutes or even seconds), and, depending on the gas atmosphere used, allows one to accurately control the crystalline phase and shape of the resulting nanostructures. Inert (N2), oxidizing (O2), or reducing (CO, H2) gases were used, leading to different morphologies and crystalline structures in a high yield, highly reproducible fabrication process.

[1]  Zhen-hua Chen,et al.  Nickel ferrite on silica nanocomposites prepared by the sol–gel method , 2004 .

[2]  K. Jensen,et al.  Synthesis of micro and nanostructures in microfluidic systems. , 2010, Chemical Society reviews.

[3]  P. Fratzl,et al.  Nucleation and growth of magnetite from solution. , 2013, Nature materials.

[4]  Saif A. Khan,et al.  Transport and reaction in microscale segmented gas-liquid flow. , 2004, Lab on a chip.

[5]  J. Marco,et al.  Uniform and water stable magnetite nanoparticles with diameters around the monodomain–multidomain limit , 2008 .

[6]  Xiuling Li,et al.  Ultrathin nanosheets of feroxyhyte: a new two-dimensional material with robust ferromagnetic behavior , 2014 .

[7]  T. Osaka,et al.  Synthesis of Fe3O4 nanoparticles with various sizes and magnetic properties by controlled hydrolysis. , 2007, Journal of colloid and interface science.

[8]  Patrick Couvreur,et al.  Magnetic nanoparticles: design and characterization, toxicity and biocompatibility, pharmaceutical and biomedical applications. , 2012, Chemical reviews.

[9]  Valérie Cabuil,et al.  Synthesis of iron oxide nanoparticles in a microfluidic device: preliminary results in a coaxial flow millichannel. , 2008, Chemical communications.

[10]  E. Paterson The Iron Oxides. Structure, Properties, Reactions, Occurrences and Uses , 1999 .

[11]  T. Ramalho,et al.  Nanostructured δ-FeOOH: a novel photocatalyst for water splitting , 2011 .

[12]  Hiroyuki Nakamura,et al.  Preparation of CdSe nanocrystals in a micro-flow-reactor. , 2002, Chemical communications.

[13]  R. Paniago,et al.  δ-FeOOH: a superparamagnetic material for controlled heat release under AC magnetic field , 2013, Journal of Nanoparticle Research.

[14]  M. Hajaligol,et al.  The removal of carbon monoxide by iron oxide nanoparticles , 2003 .

[15]  U. Schwertmann,et al.  The Iron Oxides: Structure, Properties, Reactions, Occurrences and Uses , 2003 .

[16]  A. deMello,et al.  Direct synthesis of dextran-coated superparamagnetic iron oxide nanoparticles in a capillary-based droplet reactor , 2012 .

[17]  Victor Sebastian,et al.  Reaction engineering strategies for the production of inorganic nanomaterials. , 2014, Small.

[18]  E. Goodilin,et al.  Constrained growth of anisotropic magnetic δ-FeOOH nanoparticles in the presence of humic substances , 2012 .

[19]  J. Dufour,et al.  Influence of the precipitation pH of magnetite in the oxidation process to maghemite , 2006 .

[20]  Manuel Arruebo,et al.  Comparative study of the synthesis of silica nanoparticles in micromixer–microreactor and batch reactor systems , 2011 .

[21]  N. Zheng,et al.  Small Adsorbate‐Assisted Shape Control of Pd and Pt Nanocrystals , 2012, Advanced materials.

[22]  A. Cuschieri,et al.  Neuronal cells loaded with PEI-coated Fe3O4 nanoparticles for magnetically guided nerve regeneration. , 2013, Journal of materials chemistry. B.

[23]  D. Suvorov,et al.  pH control of magnetic properties in precipitation-hydrothermal-derived CoFe2O4 , 2014 .

[24]  A. Cuschieri,et al.  Papers accepted for publication in The Analyst , 1967 .

[25]  Saif A. Khan,et al.  Microfluidic synthesis of colloidal silica. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[26]  K. Müller,et al.  A comparative study of As(III) and As(V) in aqueous solutions and adsorbed on iron oxy-hydroxides by Raman spectroscopy. , 2010, Water research.

[27]  Kevin D. Nagy,et al.  Mixing and Dispersion in Small-Scale Flow Systems , 2012 .

[28]  S. Kuhn,et al.  Size-controlled flow synthesis of gold nanoparticles using a segmented flow microfluidic platform. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[29]  P. Pacey,et al.  The interaction of oxygen and carbon monoxide with iron oxide, nickel oxide and zinc oxide surfaces: A molecular orbital study , 1989 .

[30]  V. Cabuil,et al.  Synthèse en milieu alcalin de magnétite colloïdale : contrôle du rendement et de la taille des particules , 1987 .

[31]  Victor Sebastian,et al.  Scaled-up production of plasmonic nanoparticles using microfluidics: from metal precursors to functionalized and sterilized nanoparticles. , 2014, Lab on a chip.

[32]  Chin Tsung-Shune,et al.  Hexaferrite particles prepared by a novel flux method with δ-FeOOH as a precursor , 1994 .

[33]  German Salazar-Alvarez,et al.  Novel flow injection synthesis of iron oxide nanoparticles with narrow size distribution , 2006 .