MARS-MD: rejection based image domain material decomposition

This paper outlines image domain material decomposition algorithms that have been routinely used in MARS spectral CT systems. These algorithms (known collectively as MARS-MD) are based on a pragmatic heuristic for solving the under-determined problem where there are more materials than energy bins. This heuristic contains three parts: (1) splitting the problem into a number of possible sub-problems, each containing fewer materials; (2) solving each sub-problem; and (3) applying rejection criteria to eliminate all but one sub-problem's solution. An advantage of this process is that different constraints can be applied to each sub-problem if necessary. In addition, the result of this process is that solutions will be sparse in the material domain, which reduces crossover of signal between material images. Two algorithms based on this process are presented: the Segmentation variant, which uses segmented material classes to define each sub-problem; and the Angular Rejection variant, which defines the rejection criteria using the angle between reconstructed attenuation vectors.

[1]  R Aamir,et al.  MARS spectral molecular imaging of lamb tissue: data collection and image analysis , 2013, 1311.4528.

[2]  Wenxiang Cong,et al.  Optimization of K-edge imaging with spectral CT. , 2012, Medical physics.

[3]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[4]  G. Anton,et al.  A method for stoichiometric material reconstruction with spectroscopic X-ray pixel detectors , 2004, IEEE Symposium Conference Record Nuclear Science 2004..

[5]  W. Kalender,et al.  Evaluation of a prototype dual-energy computed tomographic apparatus. I. Phantom studies. , 1986, Medical physics.

[6]  Dan Xu,et al.  Dual energy CT via fast kVp switching spectrum estimation , 2009, Medical Imaging.

[7]  S. L. Wellington,et al.  Tomographic imaging of three‐phase flow experiments , 1987 .

[8]  K. Stierstorfer,et al.  First performance evaluation of a dual-source CT (DSCT) system , 2006, European Radiology.

[9]  Ge Wang,et al.  Energy Window Optimization for X-Ray K-Edge Tomographic Imaging , 2016, IEEE Transactions on Biomedical Engineering.

[10]  Cheng Xu,et al.  Energy-resolved CT imaging with a photon-counting silicon-strip detector. , 2014, Physics in medicine and biology.

[11]  Anthony P. H. Butler,et al.  Energy Calibration of the Pixels of Spectral X-ray Detectors , 2015, IEEE Transactions on Medical Imaging.

[12]  Sabee Molloi,et al.  Least squares parameter estimation methods for material decomposition with energy discriminating detectors. , 2010, Medical physics.

[13]  Niels De Ruiter,et al.  Segmentation enhances material analysis in multi-energy CT: A simulation study , 2013, 2013 28th International Conference on Image and Vision Computing New Zealand (IVCNZ 2013).

[14]  Ken D. Sauer,et al.  Model-Based Iterative Reconstruction for Dual-Energy X-Ray CT Using a Joint Quadratic Likelihood Model , 2014, IEEE Transactions on Medical Imaging.

[15]  Shuai Leng,et al.  Quantification of iron in the presence of calcium with dual-energy computed tomography (DECT) in an ex vivo porcine plaque model , 2011, Physics in medicine and biology.

[16]  R Longo,et al.  Imaging performance of phase-contrast breast computed tomography with synchrotron radiation and a CdTe photon-counting detector. , 2016, Physica medica : PM : an international journal devoted to the applications of physics to medicine and biology : official journal of the Italian Association of Biomedical Physics.

[17]  K. Stierstorfer,et al.  Density and atomic number measurements with spectral x-ray attenuation method , 2003 .

[18]  R. Carmi,et al.  Material separation with dual-layer CT , 2005, IEEE Nuclear Science Symposium Conference Record, 2005.

[19]  W. Kalender,et al.  Evaluation of a prototype dual-energy computed tomographic apparatus. II. Determination of vertebral bone mineral content. , 1986, Medical physics.

[20]  Yuan Yao,et al.  Utilization of in-depth photon counting detectors towards x-ray spectral imaging: The benefits from the depth information , 2014, 2014 IEEE 11th International Symposium on Biomedical Imaging (ISBI).

[21]  Anthony Butler,et al.  Element-specific spectral imaging of multiple contrast agents: a phantom study , 2018 .

[22]  Rafidah Zainon,et al.  Toward quantifying the composition of soft tissues by spectral CT with Medipix3. , 2012, Medical physics.

[23]  E. Roessl,et al.  K-edge imaging in x-ray computed tomography using multi-bin photon counting detectors , 2007, Physics in medicine and biology.

[24]  Michael Campbell,et al.  Charge Summing in Spectroscopic X-Ray Detectors With High-Z Sensors , 2013, IEEE Transactions on Nuclear Science.

[25]  Guang-Hong Chen,et al.  Dual energy CT using slow kVp switching acquisition and prior image constrained compressed sensing , 2010, Physics in medicine and biology.

[26]  Philip J. Bones,et al.  Development of a CT scanner based on the Medipix family of detectors , 2010, Optical Engineering + Applications.

[27]  C. McCollough,et al.  Quantitative imaging of element composition and mass fraction using dual-energy CT: three-material decomposition. , 2009, Medical physics.

[28]  Polad M Shikhaliev.  Soft tissue imaging with photon counting spectroscopic CT. , 2015, Physics in medicine and biology.

[29]  D. White,et al.  An analysis of the Z-dependence of photon and electron interactions. , 1977, Physics in medicine and biology.

[30]  Anthony Butler,et al.  Quantitative spectral x-ray molecular CT of bio-markers in excised vulnerable atheroma , 2014 .

[31]  Gary J. Hooper,et al.  Quantitative imaging of excised osteoarthritic cartilage using spectral CT , 2016, European Radiology.

[32]  A. Macovski,et al.  Energy-selective reconstructions in X-ray computerised tomography , 1976, Physics in medicine and biology.

[33]  Hans Bornefalk.  XCOM intrinsic dimensionality for low-Z elements at diagnostic energies. , 2012, Medical physics.

[34]  Cristian T. Badea,et al.  Robust material decomposition for spectral CT , 2014, Medical Imaging.