Damage Evaluation in Cracked Vibrating Beams Using Experimental Frequencies and Finite Element Models

The paper focuses on the problem of locating and quantifying damage in vibrating beams due to cracks. The problem is shown to have certain peculiarities that, to some extent, make it easier to solve than classical situations of structural identification. The solution of the problem is based on the minimization of the objective function that compares analytical and experimental data. A fairly general automated procedure is developed using a finite element code as a routine to evaluate modal quantities. The data necessary to locate and quantify damage correctly are discussed. General considerations lead to the conclusion that at least one measurement more than the expected number of cracked sections is necessary to obtain a unique solution. The procedures developed are applied to the study cases: a supported beam and a clamped beam with one or two cracks, using both simulated and experimental data. Satisfactory results are obtained. Although only beams were considered, the methodology developed can be extended to any kind of framed structure.

[1]  Victor Barcilon.  Iterative solution of the inverse Sturm‐Liouville problem , 1974 .

[2]  Robert D. Adams,et al.  The location of defects in structures from measurements of natural frequencies , 1979 .

[3]  A. Barr,et al.  One-dimensional theory of cracked Bernoulli-Euler beams , 1984 .

[4]  G. Gladwell.  The inverse problem for the vibrating beam , 1984, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[5]  M. Yuen.  A NUMERICAL STUDY OF THE EIGENPARAMETERS OF A DAMAGED CANTILEVER , 1985 .

[6]  F. S. Wong,et al.  Structural Damage Assessment Using AI Techniques , 1986 .

[7]  A. H. England,et al.  Examples of reconstruction of an Euler-Bernoulli beam from spectral data , 1987 .

[8]  James T. P. Yao,et al.  Structural safety evaluation based on system identification approaches : proceedings of the Workshop at Lambrecht/Pfalz , 1988 .

[9]  C. Pierre,et al.  Natural modes of Bernoulli-Euler beams with symmetric cracks , 1990 .

[10]  F. J. Soeiro,et al.  Structural damage detection based on static and modal analysis , 1989 .

[11]  R. B. Testa,et al.  Modal Analysis for Damage Detection in Structures , 1991 .

[12]  J. E. Taylor,et al.  An identification problem for vibrating cracked beams , 1991 .

[13]  W. Ostachowicz,et al.  Analysis of the effect of cracks on the natural frequencies of a cantilever beam , 1991 .

[14]  Robert Y. Liang,et al.  Quantitative NDE technique for assessing damages in beam structures , 1992 .

[15]  Mohamed Kaouk,et al.  Structural damage assessment using a generalized minimum rank perturbation theory , 1993 .

[16]  Fabrizio Gatti,et al.  A damage analysis of steel beams , 1993 .

[17]  Antonino Morassi,et al.  Crack‐Induced Changes in Eigenparameters of Beam Structures , 1993 .

[18]  Fabrizio Vestroni,et al.  Identification of finite element models in structural dynamics , 1993 .

[19]  Angel C. Aparicio,et al.  Structural Damage Identification from Dynamic‐Test Data , 1994 .

[20]  Hamid Ahmadian,et al.  Finite Element Model Identification Using Modal Data , 1994 .

[21]  Y. Narkis.  Identification of Crack Location in Vibrating Simply Supported Beams , 1994 .

[22]  A. K. Pandey,et al.  Damage Detection in Structures Using Changes in Flexibility , 1994 .

[23]  Antonino Morassi,et al.  Modal analysis of notched bars: tests and comments on the sensitivity of an identification technique , 1995 .