An experimental study of the reactive ion etching (RIE) of GaP using BCl3 plasma processing

A detailed study of the reactive ion etching (RIE) of GaP, through BCl3 based plasma processing is reported. We discuss the effects on the etch rate through the studies of RF power, reactant and carrier gas (Ar) flow and chamber pressure. Atomic force microscopy (AFM) characterization, along with photoluminescence (PL) spectroscopy, is used to investigate the surface quality and correlate the material damage. Compared to previous dry etching studies, we find that the etching rate is enhanced to 850 nm/min with slight increase in surface roughness. PL spectroscopy indicates a progressive degradation of the surface quality with increased RF power, which is not due to increased surface roughness but presumably due to either a change of the surface state density or depletion layer thickness in GaP. © 2007 Elsevier B.V. All rights reserved.

[1]  G. M. Gajiev,et al.  Bragg reflection spectroscopy of opal-like photonic crystals , 2005 .

[2]  Some features of current–voltage characteristics of irradiated GaP light diodes , 2005 .

[3]  E. Yablonovitch,et al.  Semiconductor Surface-Molecule Interactions Wet Etching of InP by α-hydroxy Acids , 2002 .

[4]  D. Basak,et al.  Reactive ion etching of GaN using BCl3, BCl3/Ar and BCl3/ N2 gas plasmas , 2000 .

[5]  Milton Ohring,et al.  Materials science of thin films : deposition and structure , 2002 .

[6]  M. Buchanan,et al.  A kinetic study of structured surface relief patterning of GaP $$(\bar 1\bar 1\bar 1)$$ , 1998 .

[7]  W. Masselink,et al.  Green emission from InP-GaP quantum-dot light-emitting diodes , 2006, IEEE Photonics Technology Letters.

[8]  Diana L. Huffaker,et al.  Ground-state lasing of stacked InAs∕GaAs quantum dots with GaP strain-compensation layers grown by metal organic chemical vapor deposition , 2006 .

[9]  D. Lile,et al.  Surface characterization of InP using photoluminescence , 1987 .

[10]  S. M. Sze,et al.  Physics of semiconductor devices , 1969 .

[11]  J. Chyi,et al.  Reactive ion etching of GaN/InGaN using BCl3 plasma , 2003 .

[12]  Andrew G. Glen,et al.  APPL , 2001 .

[13]  K. Cheng,et al.  Dry etching of GaP with emphasis on selective etching over AlGaP , 2002 .

[14]  K. K. Ko,et al.  Comparison between etching in Cl2 and BCl3 for compound semiconductors using a multipolar electron cyclotron resonance source , 1992 .

[15]  Theodore I. Kamins,et al.  Device Electronics for Integrated Circuits , 1977 .

[16]  Eli Yablonovitch,et al.  Nearly ideal electronic properties of sulfide coated GaAs surfaces , 1987 .

[17]  S. Adachi,et al.  Properties of GaP(001) surfaces chemically treated in NH4OH solution , 2006 .