Modeling Large Planar Deflections of Flexible Beams in Compliant Mechanisms Using Chained Beam-Constraint-Model

[1]  Guimin Chen,et al.  Kinetostatic Modeling of Fully Compliant Bistable Mechanisms Using Timoshenko Beam Constraint Model , 2015 .

[2]  Guimin Chen,et al.  Double-Young Tristable Mechanisms , 2013 .

[3]  Aimei Zhang,et al.  A Comprehensive Elliptic Integral Solution to the Large Deflection Problems of Thin Beams in Compliant Mechanisms , 2012 .

[4]  Justus Laurens Herder,et al.  Bistable Compliant Mechanisms: Corrected Finite Element Modeling for Stiffness Tuning and Preloading Incorporation , 2012 .

[5]  Guimin Chen,et al.  Finding the optimal characteristic parameters for 3R pseudo-rigid-body model using an improved particle swarm optimizer , 2011 .

[6]  B. Jensen,et al.  Modeling and Experiments of Buckling Modes and Deflection of Fixed-Guided Beams in Compliant Mechanisms , 2011 .

[7]  Guimin Chen,et al.  Accuracy Evaluation of PRBM for Predicting Kinetostatic Behavior of Flexible Segments in Compliant Mechanisms , 2011 .

[8]  Shorya Awtar,et al.  A Generalized Constraint Model for Two-Dimensional Beam Flexures: Nonlinear Strain Energy Formulation , 2010 .

[9]  N. Tolou,et al.  A Semianalytical Approach to Large Deflections in Compliant Beams under Point Load , 2009 .

[10]  Zhao Hongzhe,et al.  Modeling of a Cartwheel Flexural Pivot , 2009 .

[11]  Hai-Jun Su,et al.  A Pseudorigid-Body 3R Model for Determining Large Deflection of Cantilever Beams Subject to Tip Loads , 2009 .

[12]  Just L. Herder,et al.  Comparison of Methods for Large Deflection Analysis of a Cantilever Beam Under Free End Point Load Cases , 2009 .

[13]  L. F. Campanile,et al.  A simple and effective solution of the elastica problem , 2008 .

[14]  A. Banerjee,et al.  Large deflection of cantilever beams with geometric non-linearity: Analytical and numerical approaches , 2008 .

[15]  Chao-Chieh Lan.  Analysis of large-displacement compliant mechanisms using an incremental linearization approach , 2008 .

[16]  Shorya Awtar,et al.  Characteristics of Beam-Based Flexure Modules , 2007 .

[17]  Shorya Awtar,et al.  Elastic Averaging in Flexure Mechanisms: A Three-Beam Parallelogram Flexure Case Study , 2006 .

[18]  L. Tsai,et al.  Modeling of Flexural Beams Subjected to Arbitrary End Loads , 2002 .

[19]  Stuart T. Smith,et al.  Flexures: Elements of Elastic Mechanisms , 2000 .

[20]  Anupam Saxena,et al.  A Simple and Accurate Method for Determining Large Deflections in Compliant Mechanisms Subjected to End Forces and Moments , 1998 .

[21]  A. Slocum,et al.  Precision Machine Design , 1992 .