In situ synchrotron X-ray imaging of 4140 steel laser powder bed fusion

[1]  Julian R. Jones,et al.  Laser-matter interactions in additive manufacturing of stainless steel SS316L and 13-93 bioactive glass revealed by in situ X-ray imaging , 2018, Additive Manufacturing.

[2]  Orion L. Kafka,et al.  An integrated process–structure–property modeling framework for additive manufacturing , 2018, Computer Methods in Applied Mechanics and Engineering.

[3]  Kamel Fezzaa,et al.  Ultrafast X-ray imaging of laser–metal additive manufacturing processes , 2018, Journal of synchrotron radiation.

[4]  Kamel Fezzaa,et al.  Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging , 2018, Acta Materialia.

[5]  Jong Min Lee,et al.  Direct visualization of current-induced spin accumulation in topological insulators , 2018, Nature Communications.

[6]  Michael F Toney,et al.  An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes. , 2018, The Review of scientific instruments.

[7]  P. Withers,et al.  In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing , 2018, Nature Communications.

[8]  J. S. Zuback,et al.  Additive manufacturing of metallic components – Process, structure and properties , 2018 .

[9]  J. Schoenung,et al.  In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing , 2017 .

[10]  A. Rollett,et al.  Analyzing the effects of powder and post-processing on porosity and properties of electron beam melted Ti-6Al-4V , 2017 .

[11]  A. Rollett,et al.  Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction , 2017, Scientific Reports.

[12]  Hui Yan,et al.  Generalized Mechanism of Field Emission from Nanostructured Semiconductor Film Cathodes , 2017, Scientific Reports.

[13]  R. M. Ward,et al.  Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development , 2016 .

[14]  Jack Beuth,et al.  Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography , 2016 .

[15]  Andrew T. Anderson,et al.  Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones , 2015, 1512.02593.

[16]  Chandrika Kamath,et al.  Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing , 2014 .

[17]  L. Kestens,et al.  Effect of fresh martensite on the stability of retained austenite in quenching and partitioning steel , 2014 .

[18]  Ming-Chuan Leu,et al.  Additive manufacturing: technology, applications and research needs , 2013, Frontiers of Mechanical Engineering.

[19]  R. Moat,et al.  A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti–6Al–4V powders , 2011 .

[20]  J. Sietsma,et al.  Microstructural development during the quenching and partitioning process in a newly designed low-carbon steel , 2011 .

[21]  Radovan Kovacevic,et al.  Effect of path planning on the laser powder deposition process: thermal and structural evaluation , 2010 .

[22]  J. Berry,et al.  Phase transformations in low-alloy steel laser deposits , 2008 .

[23]  Xiaoxu Huang,et al.  Effect of block size on the strength of lath martensite in low carbon steels , 2006 .

[24]  D. Apelian,et al.  Fatigue behavior of A356-T6 aluminum cast alloys. Part I. Effect of casting defects , 2001 .

[25]  George Krauss,et al.  New Options for Steel Selection for Automotive Applications , 1989 .

[26]  R. Morris,et al.  Infrared Temperature Sensing of Cooling Rates for Arc Welding Control. , 1981 .

[27]  G. Krauss,et al.  The effect of structure on the deformation of as-quenched and tempered martensite in an Fe-0.2 pct C alloy , 1976 .

[28]  T. Niendorf,et al.  Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime , 2017 .

[29]  Chee Kai Chua,et al.  3D printing and additive manufacturing : principles and applications , 2015 .

[30]  Shaun S Kumar,et al.  Assessment of Mechanical Properties of AISI 4140 and AISI 316 Dissimilar Weldments , 2014, Procedia Engineering.

[31]  J. Xie,et al.  Dual Beam Laser Welding , 2002 .

[32]  R. Stephens,et al.  FATIGUE CRACK GROWTH AND RETARDATION IN THE WELDED HAZ OF 4140 STEEL , 1990 .