Combining neutron diffraction and imaging for residual strain measurements in a single crystal turbine blade

Neutron diffraction is a technique often used for the non-destructive characterization of residual stresses in engineering materials and components. Measuring stresses within partially hollow objects with complex internal geometry however is challenging due to the difficulties of accurately placing the measurement gage volume in relation to the internal structures. In this study this difficulty is overcome combining surface metrology and neutron tomography to guide the neutron diffraction measurements. Using this technique the triaxial residual strain variations across the airfoil in a single crystal nickel-based superalloy turbine blade have been measured.

[1]  B. Abbey,et al.  High-tech composites to ancient metals , 2009 .

[2]  Philip J. Withers,et al.  Mapping residual and internal stress in materials by neutron diffraction , 2007 .

[3]  J. J. Ross,et al.  The LANSCE data acquisition system and SMARTS , 1999 .

[4]  L. Edwards,et al.  Application of robot kinematics methods to the simulation and control of neutron beam line positioning systems , 2007 .

[5]  P. Caron,et al.  Improvement of Creep strength in a nickel-base single-crystal superalloy by heat treatment , 1983 .

[6]  Gabor T. Herman,et al.  Image reconstruction from projections : the fundamentals of computerized tomography , 1980 .

[7]  M. W. Johnson,et al.  Neutron pulsed source instrumentation , 2003 .

[8]  P. Withers,et al.  Residual stress. Part 1 – Measurement techniques , 2001 .

[9]  T. Lorentzen.  Diffraction Techniques and Instrument Design , 2005 .

[10]  G. Webster,et al.  Non-destructive measurement of residual stress by neutron diffraction , 2001 .

[11]  Mark R. Daymond,et al.  A comparison between Engin and Engin-X, a new diffractometer optimized for stress measurement , 2004 .

[12]  Carla Andreani,et al.  Neutron diffraction methods for the study of residual stress fields , 1985 .

[13]  Philip J. Withers,et al.  Methods for obtaining the strain‐free lattice parameter when using diffraction to determine residual stress , 2007 .

[14]  Mark R. Daymond,et al.  A virtual laboratory for neutron and synchrotron strain scanning , 2004 .

[15]  P. J. Webster,et al.  Impediments to Efficient Through-Surface Strain Scanning , 1996 .

[16]  Shu Yan Zhang,et al.  New insights into alloy compositions: studying Renaissance bronze statuettes by combined neutron imaging and neutron diffraction techniques , 2011 .

[17]  T. Pirling.  Stress Determination with High Lateral Resolution Using Neutron Diffraction , 2003 .

[18]  Mark R. Daymond,et al.  ENGIN-X: a third-generation neutron strain scanner , 2006 .

[19]  Philip J. Withers,et al.  Neutron strain scanning using a radially collimated diffracted beam , 2000 .

[20]  M. Fitzpatrick,et al.  A new bridge technique for neutron tomography and diffraction measurements , 2011 .

[21]  Philip J. Withers,et al.  Neutron and Synchrotron X‐ray Strain Scanning , 2001 .

[22]  R. Reed,et al.  On the generation of microstrains during the plastic deformation of Waspaloy , 1999 .