On the Stability under Shearing Forces of a Flat Elastic Strip

1. The investigation relates to flat elastic strip, of uniform breadth, thickness and material, upon which a uniform shear is imposed by tangential tractions applied at its edges and in its plane. The tractions appear in the expression for the change of potential energy which occurs when the strip is bent, and they must therefore affect both the modes and the frequencies of its free transverse vibrations. If sufficiently intense, they will bring about a condition of limiting elastic stability, since they can neutralize, in certain types of distortion, the restoring effects of the flexural stresses. The results have some bearing on the stability of the webs of deep plate girders, which take the greater part of the total shear transmitted. The correspondence must not, however, be pressed unduly, because in a girder uniform shear will be accompanied by a varying bending moment which imposes additional stresses upon the web. It is more accurate to describe the sheared strip (of which the length, in this paper, has been assumed to be infinite) as the limiting case either of a narrow annular disc, or of a short tube, subjected to torsion. The similarity of the three problems is illustrated by the specimens shown in fig. 1, which have buckled under conditions of limiting elastic stability.