Benchmarks for Aerial Manipulation

This letter is devoted to benchmarks for aerial manipulation robots (drones equipped with robotic arms), which are demonstrating their potential to conduct tasks involving physical interactions with objects or the environment in high altitude workspaces, being a cost effective solution for example in inspection and maintenance operations. Thus, the letter deals with different methods and criteria to evaluate and compare the performance of aerial manipulators. This is not an easy task, taking into account the wide variety of designs, morphologies and implementations that can be found in recent works. In order to cope with this problem, this letter analyzes the capabilities and functionalities of several aerial manipulation prototypes (aerial platform + manipulator), identifying a set of relevant metrics and criteria. A number of benchmarks are defined to evaluate the performance of the aerial manipulator in terms of accuracy, execution time, manipulation capability, or impact response. Experimental results carried out with a compliant joint aerial manipulator in test-bench and in indoor-outdoor testbeds illustrate some of the benchmarks.

[1]  Lorenzo Marconi,et al.  Developing an Aerial Manipulator Prototype: Physical Interaction with the Environment , 2014, IEEE Robotics & Automation Magazine.

[2]  Vincenzo Lippiello,et al.  Uncalibrated Visual Servo for Unmanned Aerial Manipulation , 2017, IEEE/ASME Transactions on Mechatronics.

[3]  Alin Albu-Schäffer,et al.  A Unified Passivity-based Control Framework for Position, Torque and Impedance Control of Flexible Joint Robots , 2007, Int. J. Robotics Res..

[4]  A. Ollero,et al.  UAL : An Abstraction Layer for Unmanned Aerial Vehicles , 2018 .

[5]  Feng Xiao,et al.  An Integrated Delta Manipulator for Aerial Repair: A New Aerial Robotic System , 2019, IEEE Robotics & Automation Magazine.

[6]  A. Ollero,et al.  Aerial manipulation robot composed of an autonomous helicopter and a 7 degrees of freedom industrial manipulator , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[7]  Aníbal Ollero,et al.  Lightweight compliant arm with compliant finger for aerial manipulation and inspection , 2016, 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[8]  Aníbal Ollero,et al.  A multilayer control for multirotor UAVs equipped with a servo robot arm , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[9]  Guillermo Heredia,et al.  Physical-Virtual Impedance Control in Ultralightweight and Compliant Dual-Arm Aerial Manipulators , 2018, IEEE Robotics and Automation Letters.

[10]  Guillermo Heredia,et al.  Sensor Installation and Retrieval Operations Using an Unmanned Aerial Manipulator , 2019, IEEE Robotics and Automation Letters.

[11]  Seungwon Choi,et al.  Aerial manipulation using a quadrotor with a two DOF robotic arm , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[12]  Anibal Ollero,et al.  Design of a lightweight dual arm system for aerial manipulation , 2018 .

[13]  Aníbal Ollero,et al.  Control of an aerial robot with multi-link arm for assembly tasks , 2013, 2013 IEEE International Conference on Robotics and Automation.

[14]  Antonio Franchi,et al.  Design, identification and experimental testing of a light-weight flexible-joint arm for aerial physical interaction , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[15]  Matko Orsag,et al.  Modeling and Control of MM-UAV: Mobile Manipulating Unmanned Aerial Vehicle , 2013, J. Intell. Robotic Syst..

[16]  Manuel Béjar,et al.  First Experimental Results on Motion Planning for Transportation in Aerial Long-Reach Manipulators with Two Arms , 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[17]  Antonio Franchi,et al.  Omnidirectional Aerial Vehicles With Unidirectional Thrusters: Theory, Optimal Design, and Control , 2018, IEEE Robotics and Automation Letters.

[18]  Vincenzo Lippiello,et al.  Design, modeling and control of a 5-DoF light-weight robot arm for aerial manipulation , 2015, 2015 23rd Mediterranean Conference on Control and Automation (MED).

[19]  Guillermo Heredia,et al.  Design of an Anthropomorphic, Compliant, and Lightweight Dual Arm for Aerial Manipulation , 2018, IEEE Access.

[20]  Aníbal Ollero,et al.  Novel Aerial Manipulator for Accurate and Robust Industrial NDT Contact Inspection: A New Tool for the Oil and Gas Inspection Industry , 2019, Sensors.

[21]  Davide Bicego,et al.  Modeling and control of FAST-Hex: A fully-actuated by synchronized-tilting hexarotor , 2016, 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[22]  Vijay Kumar,et al.  Design, modeling, estimation and control for aerial grasping and manipulation , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[23]  Henrik I. Christensen,et al.  A Taxonomy of Benchmark Tasks for Robot Manipulation , 2015, ISRR.

[24]  Vincenzo Lippiello,et al.  Impedance control of VToL UAVs with a momentum-based external generalized forces estimator , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[25]  Jerry Pratt,et al.  Series elastic actuators for high fidelity force control , 2002 .

[26]  Davide Bicego,et al.  6D interaction control with aerial robots: The flying end-effector paradigm , 2019, Int. J. Robotics Res..

[27]  Kazuhiro Shimonomura,et al.  Aerial torsional manipulation employing multi-rotor flying robot , 2016, 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[28]  Aaron M. Dollar,et al.  The Yale Aerial Manipulator: Grasping in flight , 2011, 2011 IEEE International Conference on Robotics and Automation.

[29]  Jacky Baltes,et al.  A benchmark suite for mobile robots , 2000, Proceedings. 2000 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2000) (Cat. No.00CH37113).

[30]  Davide Bicego,et al.  A Truly-Redundant Aerial Manipulator System With Application to Push-and-Slide Inspection in Industrial Plants , 2019, IEEE Robotics and Automation Letters.

[31]  Konstantin Kondak,et al.  The AEROARMS Project: Aerial Robots with Advanced Manipulation Capabilities for Inspection and Maintenance , 2018, IEEE Robotics & Automation Magazine.

[32]  Sami Haddadin,et al.  A unified framework for external wrench estimation, interaction control and collision reflexes for flying robots , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[33]  Siddhartha S. Srinivasa,et al.  The YCB object and Model set: Towards common benchmarks for manipulation research , 2015, 2015 International Conference on Advanced Robotics (ICAR).