A component test facility based on the spherical tokamak

Recent experiments (Synakowski et al 2004 Nucl. Fusion 43 1648, Lloyd et al 2004 Plasma Phys. Control. Fusion 46 B477) on the Spherical Tokamak (or Spherical Torus, ST) (Peng 2000 Phys. Plasmas 7 1681) have discovered robust plasma conditions, easing shaping, stability limits, energy confinement, self-driven current and sustainment. This progress has encouraged an update of the plasma conditions and engineering of a Component Test Facility (CTF), (Cheng 1998 Fusion Eng. Des. 38 219) which is a very valuable step in the development of practical fusion energy. The testing conditions in a CTF are characterized by high fusion neutron fluxes Γn ≈ 8.8 × 1013 n s−1 cm−2 ('wall loading' WL ≈ 2 MW m−2), over size-scale >105 cm2 and depth-scale >50 cm, delivering >3 accumulated displacement per atom per year ('neutron fluence' >0.3 MW yr−1 m−2) (Abdou et al 1999 Fusion Technol. 29 1). Such conditions are estimated to be achievable in a CTF with R0 = 1.2 m, A = 1.5, elongation ~3, Ip ~ 12 MA, BT ~ 2.5 T, producing a driven fusion burn using 47 MW of combined neutral beam and RF heating power. A design concept that allows straight-line access via remote handling to all activated fusion core components is developed and presented. The ST CTF will test the lifetime of single-turn, copper alloy centre leg for the toroidal field coil without an induction solenoid and neutron shielding and require physics data on solenoid-free plasma current initiation, ramp-up to and sustainment at multiple megaampere level. A systems code that combines the key required plasma and engineering science conditions of CTF has been prepared and utilized as part of this study. The results show high potential for a family of relatively low cost CTF devices to suit a range of fusion engineering and technology test missions.

[1]  O. N. Bowen,et al.  Long pulse neutral beam system for the Tokamak Physics Experiment , 1995 .

[2]  D. J. Campbell,et al.  Chapter 1: Overview and summary , 1999 .

[3]  P. J. Knight,et al.  Integrated plasma physics modelling for the Culham steady state spherical tokamak fusion power plant , 2004 .

[4]  Yueng Kay Martin Peng,et al.  The physics of spherical torus plasmas , 2000 .

[5]  W. Kerner,et al.  Plasma confinement in JET H?mode plasmas with H, D, DT and T isotopes , 1999 .

[6]  E. D. Fredrickson,et al.  β-Limiting MHD instabilities in improved-performance NSTX spherical torus plasmas , 2003 .

[7]  Laila A. El-Guebaly,et al.  ARIES-ST nuclear analysis and shield design , 2003 .

[8]  D. A. Gates,et al.  High β, long pulse, bootstrap sustained scenarios on the National Spherical Torus Experiment (NSTX) , 2003 .

[9]  R. E. Bell,et al.  Operation of the NSTX Thomson scattering system , 2002 .

[10]  R. Gruber,et al.  MHD-limits to plasma confinement , 1984 .

[11]  Bell,et al.  Bootstrap current in TFTR. , 1988, Physical review letters.

[12]  S. S. Medley,et al.  Confinement studies of auxiliary heated NSTX plasmas , 2004 .

[13]  Ralph W. Moir,et al.  On the exploration of innovative concepts for fusion chamber technology , 2001 .

[14]  S. Jardin,et al.  Dynamic modeling of transport and positional control of tokamaks , 1986 .

[15]  Y-K.M. Peng,et al.  Study of a spherical tokamak based volumetric neutron source , 1998 .

[16]  C. D. Challis,et al.  MAST and the impact of low aspect ratio on tokamak physics , 2004 .

[17]  Tadashi Sekiguchi,et al.  Plasma Physics and Controlled Nuclear Fusion Research , 1987 .

[18]  O. Mitarai,et al.  Plasma Current Ramp-Up in the Component Test Facility (CTF) , 2005 .

[19]  S. Jardin,et al.  Physics basis for a spherical torus power plant , 1999 .

[20]  L. L. Lao,et al.  The resistive wall mode and feedback control physics design in NSTX , 2004 .

[21]  J. G. Cordey,et al.  Beam‐induced currents in toroidal plasmas of arbitrary aspect ratio , 1980 .

[22]  J. Manickam,et al.  Ideal MHD stability calculations in axisymmetric toroidal coordinate systems , 1982 .

[23]  Alice Ying,et al.  Results of an International Study on a High-Volume Plasma-Based Neutron Source for Fusion Blanket Development , 1996 .

[24]  C. Gormezano,et al.  A review of internal transport barrier physics for steady-state operation of tokamaks , 2004 .

[25]  G. Taylor,et al.  Efficient generation of noninductive, off-axis, Ohkawa current, driven by electron Bernstein waves in high β, spherical torus plasmas , 2004 .

[26]  J. Jacquinot.  Recent developments in steady-state physics and technology of tokamaks in Cadarache , 2003 .

[27]  D. Strickler,et al.  Systems cost and performance analysis for a spherical torus-based volume neutron source , 1999 .

[28]  Mizuki Sakamoto,et al.  Plasma Current Start-up by ECW and Vertical Field in the TST-2 Spherical Tokamak , 2004 .

[29]  James R. Wilson,et al.  Next-step spherical torus experiment and spherical torus strategy in the course of development of fusion energy , 2004 .