Moving Force-Induced Vibration of a Rotating Beam with Elastic Boundary Conditions

In this paper, an analytical technique, the so-called Fourier Spectral method (FSM), is extended to the vibration analysis of a rotating Rayleigh beam considering the gyroscopic effect. The model presented can have arbitrary boundary conditions specified in terms of elastic constraints in the translations and rotations or even in terms of attached lumped masses and inertias. Each displacement function is universally expressed as a linear combination of a standard Fourier cosine series and several supplementary functions introduced to ensure and accelerate the convergence of the series expansion. Lagrange's equation is established for all the unknown Fourier coefficients viewed as a set of independent generalized coordinates. A numerical model is constructed for the rotating beam. First, a numerical example considering simply supported boundary conditions at both ends is calculated and the results are compared with those of a published paper to show the accuracy and convergence of the proposed model. Then, the method is applied to one real work piece structure with elastically supported boundary conditions updated from the modal experiment results including both the frequencies and mode shapes using the method of least squares. Several numerical examples of the updated model are studied to show the effects of some parameters on the dynamic characteristics of the work piece subjected to moving loads at different constant velocities.

[1]  Yeong-Bin Yang,et al.  IMPACT RESPONSE OF BRIDGES WITH ELASTIC BEARINGS TO MOVING LOADS , 2001 .

[2]  G. Litak,et al.  Nonlinear dynamics of a regenerative cutting process , 2012, 1201.4923.

[3]  Linda Simo Mthembu,et al.  FINITE ELEMENT MODEL UPDATING , 2013 .

[4]  John E. Mottershead,et al.  Finite Element Model Updating in Structural Dynamics , 1995 .

[5]  Yeong-Bin Yang,et al.  Vehicle-bridge interaction dynamics: with applications to high-speed railways , 2004 .

[6]  Liming Dai,et al.  The Effects of Workpiece Deflection and Motor Features on Quality of Machining Process — Nonlinear Vibrations Analysis , 2007 .

[7]  Minjie Wang,et al.  Dynamics of a Rotating Shaft Subject to a Three-Directional Moving Load , 2007 .

[8]  A. Galip Ulsoy,et al.  THE DYNAMIC-RESPONSE OF A ROTATING SHAFT SUBJECT TO A MOVING LOAD , 1988 .

[9]  A. Argento.  A spinning beam subjected to a moving deflection dependent load,: Part I: response and resonance , 1995 .

[10]  S. C. Huang,et al.  Resonant phenomena of a rotating cylindrical shell subjected to a harmonic moving load , 1990 .

[11]  Minjie Wang,et al.  A dynamic model for a rotating beam subjected to axially moving forces , 2007 .

[12]  Fawzi M. A. El-Saeidy,et al.  Finite-Element Dynamic Analysis of a Rotating Shaft with or without Nonlinear Boundary Conditions Subject to a Moving Load , 2000 .

[13]  Jingtao Du,et al.  Free vibration of two elastically coupled rectangular plates with uniform elastic boundary restraints , 2011 .

[14]  Huajiang Ouyang,et al.  Self-excited vibration of workpieces in a turning process , 2012 .

[15]  A. Argento,et al.  Dynamic response of a rotating beam subjected to an accelerating distributed surface force , 1992 .

[16]  S. H. Zibdeh,et al.  Dynamic Response of a Rotating Beam Subjected to a Random Moving Load , 1999 .

[18]  Yih-Hwang Lin,et al.  Finite element analysis of elastic beams subjected to moving dynamic loads , 1990 .

[19]  André Preumont,et al.  Regenerative chatter reduction by active damping control , 2007 .

[20]  Cha'o-Kuang Chen,et al.  A stability analysis of regenerative chatter in turning process without using tailstock , 2006 .

[21]  Yingjie Wang,et al.  INTERACTION RESPONSE OF TRAIN LOADS MOVING OVER A TWO-SPAN CONTINUOUS BEAM , 2013 .

[22]  Heow Pueh Lee,et al.  Dynamic response of a rotating timoshenko shaft subject to axial forces and moving loads , 1995 .

[23]  Chung-Feng Jeffrey Kuo,et al.  DYNAMIC STABILITY ANALYSIS AND VIBRATION CONTROL OF A ROTATING ELASTIC BEAM CONNECTED WITH AN END MASS , 2013 .

[24]  Gábor Stépán,et al.  Criticality of Hopf bifurcation in state-dependent delay model of turning processes , 2008 .

[25]  W. L. Li.  FREE VIBRATIONS OF BEAMS WITH GENERAL BOUNDARY CONDITIONS , 2000 .