Additive manufacturing of medical instruments: A state-of-the-art review
暂无分享,去创建一个
[1] A. Amis,et al. Rapid prototyping techniques for anatomical modelling in medicine. , 1997, Annals of the Royal College of Surgeons of England.
[2] Donald Freeman,et al. Stereolithography and Prosthetic Test Socket Manufacture: A Cost/Benefit Analysis , 1998 .
[3] D. Hutmacher,et al. Scaffolds in tissue engineering bone and cartilage. , 2000, Biomaterials.
[4] Ian Gibson,et al. The use of rapid prototyping to assist medical applications , 2006 .
[5] Jos Vander Sloten,et al. A classification of cranial implants based on the degree of difficulty in computer design and manufacture , 2008, The international journal of medical robotics + computer assisted surgery : MRCAS.
[6] Mika Salmi,et al. Digital design and rapid manufacturing in orbital wall reconstruction , 2009 .
[7] Uri Frodis,et al. Microscale metal additive manufacturing of multi‐component medical devices , 2010 .
[8] Samuel B. Kesner,et al. Design Principles for Rapid Prototyping Forces Sensors Using 3-D Printing , 2011, IEEE/ASME Transactions on Mechatronics.
[9] Gabor Fichtinger,et al. Section-thickness profiling for brachytherapy ultrasound guidance , 2011, Medical Imaging.
[10] Tim C. Lueth,et al. How to Design and Create a Cardan Shaft for a Single Port Robot by Selective Laser Sintering , 2012 .
[11] Mika Salmi,et al. Designing and Additive Manufacturing A Prototype for A Novel Instrument for Mandible Fracture Reduction , 2012 .
[12] Tim Lüth,et al. Interdisciplinary development of a single-port robot , 2012, 2012 IEEE International Conference on Robotics and Biomimetics (ROBIO).
[13] Paul Breedveld,et al. DragonFlex – Smart Steerable Laparoscopic Instrument , 2013 .
[14] Tim C. Lueth,et al. Multi arm snake-like robot kinematics , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[15] Christos Yiallouras,et al. MRI-compatible positioning device for guiding a focused ultrasound system for transrectal treatment of prostate cancer , 2014, International Journal of Computer Assisted Radiology and Surgery.
[16] Peter Liacouras,et al. Personalized Surgical Instruments , 2013 .
[17] Vipin K. Rastogi,et al. On Demand Additive Manufacturing of a Basic Surgical Kit , 2013 .
[18] N Mylonas,et al. MR compatible positioning device for guiding a focused ultrasound system for the treatment of brain deseases , 2014, The international journal of medical robotics + computer assisted surgery : MRCAS.
[19] David G. Armstrong,et al. Three-dimensional printing surgical instruments: are we there yet? , 2014, The Journal of surgical research.
[20] Tim Lüth,et al. Design of a spine-inspired kinematic for the guidance of flexible instruments in minimally invasive surgery , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[21] Thomas Maier,et al. First 3D printed medical robot for ENT surgery - Application specific manufacturing of laser sintered disposable manipulators , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[22] M. V. Makhlouf,et al. Application of 3-dimensional printing in hand surgery for production of a novel bone reduction clamp. , 2014, The Journal of hand surgery.
[23] Heinz Wörn,et al. Flexible instrument for minimally invasive robotic surgery using rapid prototyping technology for fabrication , 2014, 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.
[24] Julielynn Y. Wong,et al. 3D printing of surgical instruments for long-duration space missions. , 2014, Aviation, space, and environmental medicine.
[26] Conor J. Walsh,et al. Shape Deposition Manufacturing of a Soft, Atraumatic, and Deployable Surgical Grasper , 2015 .
[27] Paul Breedveld,et al. Design for Additive Manufacture of Fine Medical Instrumentation—DragonFlex Case Study , 2015 .
[28] Samuel J. Lin,et al. Three-dimensional Printing in Developing Countries , 2015, Plastic and reconstructive surgery. Global open.
[30] Jessica Burgner-Kahrs,et al. Additive manufacturing of patient-specific tubular continuum manipulators , 2015, Medical Imaging.
[31] Paul G. McMenamin,et al. Emerging Applications of Bedside 3D Printing in Plastic Surgery , 2015, Front. Surg..
[32] Albert J. Shih,et al. Additive Manufacturing of Custom Orthoses and Prostheses – A Review☆ , 2015 .
[33] Guang-Zhong Yang,et al. Rapid manufacturing with selective laser melting for robotic surgical tools: Design and process considerations , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).
[34] OkhunovZhamshid,et al. Comparison of Flow Characteristics of Novel Three-Dimensional Printed Ureteral Stents Versus Standard Ureteral Stents in a Porcine Model , 2015 .
[35] Paul Breedveld,et al. Method for minimising rolling joint play in the steerable laparoscopic instrument prototype DragonFlex , 2015, Minimally invasive therapy & allied technologies : MITAT : official journal of the Society for Minimally Invasive Therapy.
[36] Aldo Roda,et al. A simple and compact smartphone accessory for quantitative chemiluminescence-based lateral flow immunoassay for salivary cortisol detection. , 2015, Biosensors & bioelectronics.
[37] CookFredrick Roscoe,et al. Rapid Prototyping of Inspired Gas Delivery System for Pulmonary MRI Research , 2015 .
[38] A. Dara Dotz. A Pilot of 3D Printing of Medical Devices in Haiti , 2015 .
[39] Re: Development and Initial Porcine and Cadaver Experience with Three-Dimensional Printing of Endoscopic and Laparoscopic Equipment. , 2015, The Journal of urology.
[40] John R. Tumbleston,et al. Continuous liquid interface production of 3D objects , 2015, Science.
[41] Yoshihiro Muragaki,et al. Endoscopic cell sheet transplantation device developed by using a 3-dimensional printer and its feasibility evaluation in a porcine model. , 2015, Gastrointestinal endoscopy.
[42] Takakazu Ishimatsu,et al. Research on seamless development of surgical instruments based on biological mechanisms using CAD and 3D printer. , 2015, Bio-medical materials and engineering.
[43] Yusoff Way,et al. The Application of Rapid Prototyping Technology and Quality Functional Deployment (QFD) approach in enhancing the Endotracheal Tube Holder Model in Medical Application , 2015 .
[44] Dimitra Dodou,et al. A surge of p-values between 0.041 and 0.049 in recent decades (but negative results are increasing rapidly too) , 2015, PeerJ.
[45] Julielynn Y Wong,et al. Ultra-Portable Solar-Powered 3D Printers for Onsite Manufacturing of Medical Resources. , 2015, Aerospace medicine and human performance.
[46] G. Jung,et al. 3D-Printed Microfluidic Device for the Detection of Pathogenic Bacteria Using Size-based Separation in Helical Channel with Trapezoid Cross-Section , 2015, Scientific Reports.
[47] Jaydev P. Desai,et al. Towards the development of a spring-based continuum robot for neurosurgery , 2015, Medical Imaging.
[48] Daniel B. Jones,et al. Three-Dimensional Modeling May Improve Surgical Education and Clinical Practice , 2016, Surgical innovation.
[49] J. Pisapia,et al. 3D printing in neurosurgery: A systematic review , 2016, Surgical neurology international.
[50] Brijesh S. Gill,et al. 3D Printed Surgical Instruments: The Design and Fabrication Process , 2016, World Journal of Surgery.
[51] Diana Popescu,et al. Rapid prototyping for patient-specific surgical orthopaedics guides: A systematic literature review , 2016, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[52] Diana-Irinel Baila,et al. Design of Handle Elevators and ATR Spectrum of Material Manufactured by Stereolithography , 2016, PLM.
[53] Toshiyuki Murakami,et al. Development of meal assistance device for patients with spinal cord injury , 2016, 2016 IEEE 14th International Workshop on Advanced Motion Control (AMC).
[54] Carlos Aguilera-Astudillo,et al. A low-cost 3-D printed stethoscope connected to a smartphone , 2016, EMBC.
[55] Mika Salmi,et al. Possibilities of Preoperative Medical Models Made by 3D Printing or Additive Manufacturing , 2016, Journal of medical engineering.
[56] Charles R. Thomas,et al. Manufacture and evaluation of 3-dimensional printed sizing tools for use during intraoperative breast brachytherapy , 2016, Advances in radiation oncology.
[57] M. Ulmeanu,et al. Sintering the beaks of the elevator manufactured by direct metal laser sintering (DMLS) process from Co - Cr alloy , 2016 .
[58] A GálvezJorge,et al. Not Just a Pretty Face: Three-Dimensional Printed Custom Airway Management Devices , 2016 .
[59] K. Hahm,et al. Novel 3D‐printing technique for caps to enable tailored therapeutic endoscopy , 2016, Digestive endoscopy : official journal of the Japan Gastroenterological Endoscopy Society.
[60] Robert J. Wood,et al. An integrated design and fabrication strategy for entirely soft, autonomous robots , 2016, Nature.
[61] M. Stevanovic,et al. Surgical applications of three-dimensional printing: a review of the current literature & how to get started. , 2016, Annals of translational medicine.
[62] Sandeep W. Dahake,et al. Applications of medical rapid prototyping assisted customized surgical guides in complex surgeries , 2016 .
[63] Eric J. Seibel,et al. Design and Fabrication of a Disposable Dental Handpiece for Clinical Use of a New Laser-Based Therapy-Monitoring System , 2016 .
[64] Sneh Anand,et al. Validation of Reverse-Engineered and Additive-Manufactured Microsurgical Instrument Prototype , 2016, Surgical innovation.
[65] Philippe Poignet,et al. Design and evaluation of a novel variable stiffness spherical joint with application to MR-compatible robot design , 2016, 2016 IEEE International Conference on Robotics and Automation (ICRA).
[66] Allison M. Okamura,et al. Design of 3-D Printed Concentric Tube Robots , 2016, IEEE Transactions on Robotics.
[67] Ashley Langell,et al. Industry-academic partnerships: an approach to accelerate innovation. , 2016, The Journal of surgical research.
[68] Christos Yiallouras,et al. MRI guided focused ultrasound robotic system for the treatment of gynaecological tumors , 2016, The international journal of medical robotics + computer assisted surgery : MRCAS.
[69] J. Lewis,et al. Printing soft matter in three dimensions , 2016, Nature.
[70] Xiaoguang Liu,et al. Reconstruction of the Upper Cervical Spine Using a Personalized 3D-Printed Vertebral Body in an Adolescent With Ewing Sarcoma , 2016, Spine.
[71] Dimitrios Paraskevopoulos. Specification Analysis, Design, and Prototyping of a Burr Hole Endoscope Stabilization Device , 2016, Surgical innovation.
[72] Kaspar Althoefer,et al. A compact continuum manipulator system with enhanced steering abilities for robot-assisted surgery , 2016, 2016 6th IEEE International Conference on Biomedical Robotics and Biomechatronics (BioRob).
[73] Tim Lüth,et al. A new 3D-printed overtube system for endoscopic submucosal dissection: first results of a randomized study in a porcine model , 2016, Endoscopy.
[74] Tim Lüth,et al. First step towards an automated designed Multi-Arm Snake-Like Robot for minimally invasive surgery , 2016, 2016 6th IEEE International Conference on Biomedical Robotics and Biomechatronics (BioRob).
[75] Andreas Schmitz,et al. Shape sensing of miniature snake-like robots using optical fibers , 2017, 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).
[76] A. Meining,et al. A 3D-printed cap with sideoptics for colonoscopy: a randomized ex vivo study , 2017, Endoscopy.
[77] Parsaoran Hutapea,et al. Novel Steerable Smart Needle With a Built-In Recovery Mechanism for Multiple Actuations , 2017 .
[78] Bruno Siciliano,et al. A novel force sensing integrated into the trocar for minimally invasive robotic surgery , 2017, 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).
[79] Gerwin Smit,et al. 3D-printed upper limb prostheses: a review , 2017, Disability and rehabilitation. Assistive technology.
[81] Tim Lüth,et al. Multi-arm snake-like robot , 2017, 2017 IEEE International Conference on Robotics and Automation (ICRA).
[82] Marinos Yiannakou,et al. MRI‐guided focused ultrasound robotic system for the treatment of bone cancer , 2017, The international journal of medical robotics + computer assisted surgery : MRCAS.
[83] Niklas Sandler,et al. 3D printed drug delivery devices: perspectives and technical challenges , 2017, Expert review of medical devices.
[84] Hideharu Shintani,et al. Ethylene Oxide Gas Sterilization of Medical Devices. , 2017, Biocontrol science.
[85] Sunpreet Singh,et al. Material issues in additive manufacturing: A review , 2017 .
[86] N F Kashapov,et al. Application of reverse engineering in the medical industry. , 2017 .
[87] Murat Guvendiren,et al. Current and emerging applications of 3D printing in medicine , 2017, Biofabrication.
[88] M. A. Garcia-Fidalgo,et al. A novel stereotactic frame for real PET-guided biopsies: A preclinical proof-of-concept. , 2017, Physica medica : PM : an international journal devoted to the applications of physics to medicine and biology : official journal of the Italian Association of Biomedical Physics.
[89] Eduardo V. Navajas,et al. Three-Dimensional Printing of a Transconjunctival Vitrectomy Trocar-Cannula System , 2017, Ophthalmologica.
[90] Tim C. Lueth,et al. Suitability Evaluation of various Manufacturing Technologies for the Development of Surgical Snake-like Manipulators from Metals Based on Flexure Hinges , 2017 .
[91] Kaitlin Oliver-Butler,et al. Concentric agonist-antagonist robots for minimally invasive surgeries , 2017, Medical Imaging.
[92] Bijan Shirinzadeh,et al. Design of a 3-DOF parallel mechanism for the enhancement of endonasal surgery , 2017, 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM).
[93] Med Amine Laribi,et al. A Novel Kinematic of a 4 d.o.fs Haptic Device Based on the Delta Robot Architecture , 2017, RAAD.
[94] Guang-Zhong Yang,et al. 3D printing of improved needle grasping instrument for flexible robotic surgery , 2017, 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).
[95] Yaxiong Liu,et al. The Emerging Frontiers and Applications of High-Resolution 3D Printing , 2017, Micromachines.
[96] Steven Rothenberg,et al. 3D Printing Prototypes for Healthcare Professionals: Creating a Reciprocating Syringe , 2017, Journal of Digital Imaging.
[97] Scott J Hollister,et al. Additive manufacturing of polymer melts for implantable medical devices and scaffolds , 2017, Biofabrication.
[98] An ad hoc three dimensionally printed tool facilitates intraesophageal suturing in experimental surgery. , 2018, The Journal of surgical research.
[99] Juan Pablo Wachs,et al. Collaborative Robots in Surgical Research: a Low-Cost Adaptation , 2018, HRI.
[100] Gerwin Smit,et al. Design of a Novel 3D-printed 2-DOF Steerable Electrosurgical Grasper for Minimally Invasive Surgery , 2018 .
[101] Naoya Yamasaki,et al. Development of a finger like multi-joint articulated surgical retractor for use in endoscopic surgery , 2018 .
[102] Yusoff Way. Product Development and Cost Analysis of Fabricating the Prototype of Roller Clamp in Intravenous (I.V) Tubing Medical Devices using Fused Deposition Modeling (FDM) Technology , 2018 .
[103] Sunpreet Singh,et al. Experimental investigations on natural fiber embedded additive manufacturing-based biodegradable structures for biomedical applications , 2018, Rapid Prototyping Journal.
[104] Kanwal M. Farooqi,et al. Innovations in Preoperative Planning: Insights into Another Dimension Using 3D Printing for Cardiac Disease. , 2017, Journal of cardiothoracic and vascular anesthesia.
[105] Malcolm Xing,et al. 3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances , 2018, Bioactive materials.
[106] J. M. Velasco,et al. Ingeniería de diseño en Cirugía. ¿Cómo diseñar, probar y comercializar dispositivos quirúrgicos fabricados con impresión 3D? , 2018 .
[107] M. Suárez,et al. Design Engineering in Surgery. How to Design, Test and Market Surgical Devices Made With 3 D Printing? , 2018 .
[108] Savaş Şahin,et al. Development of a 2-dof uterine manipulator with LED illumination system as a new transvaginal uterus amputation device for gynecological surgeries , 2018, Minimally invasive therapy & allied technologies : MITAT : official journal of the Society for Minimally Invasive Therapy.
[109] Jesse K. Placone,et al. Recent Advances in Extrusion‐Based 3D Printing for Biomedical Applications , 2018, Advanced healthcare materials.
[110] Mika Salmi,et al. Implementation of Industrial Additive Manufacturing: Intelligent Implants and Drug Delivery Systems , 2018, Journal of functional biomaterials.
[111] Gerwin Smit,et al. Ten guidelines for the design of non-assembly mechanisms: The case of 3D-printed prosthetic hands , 2018, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[112] Pinar Zorlutuna,et al. Enabling personalized implant and controllable biosystem development through 3D printing. , 2018, Biotechnology advances.
[113] S. Ramakrishna,et al. Bioprinting in ophthalmology: current advances and future pathways , 2019, Rapid Prototyping Journal.