Solid Propellant Microthrusters on Silicon: Design, Modeling, Fabrication, and Testing

The design, modeling, fabrication, and characterization of solid propellant microthrusters for space application is presented. The operational concept of solid propellant thruster is simply based on the combustion of a solid energetic material stored in a micromachined chamber. Each thruster contains four main parts (nozzle, heater, chamber, seal). Thrusters presented in this paper have a chamber area of 2.25 mm2. Throat diameters (160, 250, and 500 mum) have been calculated to generate thrusts in the range from 0.3 to 30 mN that meets station keeping requirements for micro satellites. Fabrication processes for each part of the thruster are presented as well as the assembling procedure and the electronic module implementation. Characterizations give ignition power between 80 and 150 mW depending on the energetic material contained in the igniter's cavity. The ignition success is of 100% when using a Zirconium Potassium Perchlorate propellant. Thrust balance is presented as well as the thrust measurements that validate our model

[1]  Lamedica Giulio,et al.  Microthrusters in silicon for aerospace application , 2002 .

[2]  Keiichi,et al.  MEMS-Based Solid Propellant Rocket Array Thruster with Electrical Feedthroughs , 2003 .

[3]  Eui-Hyeok Yang,et al.  AN OVERVIEW OF MEMS-BASED MICROPROPULSION DEVELOPMENTS AT JPL , 2003 .

[4]  D. Briand,et al.  Downscaling of solid propellant pyrotechnical microsystems , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[5]  Carole Rossi,et al.  Thrust stand for ground tests of solid propellant microthrusters , 2002 .

[6]  Masayoshi Esashi,et al.  MEMS-Based Solid Propellant Rocket Array Thruster , 2003 .

[7]  Adam Huang,et al.  Development of an Inspector Satellite Propulsion Module Using Photostructurable Glass/Ceramic Materials , 2004 .

[8]  Tanemasa Asano,et al.  Design and testing of mega-bit microthruster arrays , 2002 .

[9]  Siaw Kiang Chou,et al.  Development of a solid propellant microthruster with chamber and nozzle etched on a wafer surface , 2004 .

[10]  Carole Rossi,et al.  Compact model based on a lumped parameter approach for the prediction of solid propellant micro-rocket performance , 2002 .

[11]  George P. Sutton,et al.  Rocket propulsion elements - An introduction to the engineering of rockets (6th revised and enlarged edition) , 1963 .

[12]  R. B. Cohen,et al.  Digital MicroPropulsion , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).