Performance and emission characteristics of a CI engine using graphene oxide (GO) nano-particles additives in biodiesel-diesel blends

Abstract In the present study, the effects of graphene oxide (GO) nano-particles on performance and emissions of a diesel engine fueled with Oenothera lamarckiana biodiesel was investigated. Biodiesel was used in the blend of B20. The GO nano-particles with concentrations of 30, 60, and 90 ppm were considered for each fuel blend. Experiments were performed at a constant speed of 2100 rpm at loads of 0%, 25%, 50%, 75%, and 100%. Various parameters, such as power, exhaust gas temperature (EGT), carbon monoxide (CO), carbon dioxide (CO2), unburned hydrocarbons (UHCs), and nitrogen oxides (NOx), were investigated. Results showed that by using GO, power and EGT significantly increase. Furthermore, by using GO nano-particles, significant reductions in CO (∼5%–22%) and UHCs (∼17%–26%) were observed. However, under similar conditions, a slight increase in CO2 (∼7%–11%) and NOx (∼4%–9%) emissions observed. Finally, it can be concluded that nano-graphene oxide can be introduced as a suitable alternative fuel additive for Oenothera lamarckiana biodiesel blends.

[1]  G. R. Kannan,et al.  Performance Emission and Combustion Characteristics of a Diesel Engine Fueled with Biodiesel Produced from Waste Cooking Oil , 2010 .

[2]  M. Iso,et al.  Production of biodiesel fuel from triglycerides and alcohol using immobilized lipase , 2001 .

[3]  R. Anand,et al.  Performance, emission and combustion characteristics of a diesel engine using Carbon Nanotubes blended Jatropha Methyl Ester Emulsions , 2014 .

[4]  R. Mehta,et al.  Nanofuels: Combustion, engine performance and emissions , 2014 .

[5]  Naveen Kumar,et al.  A study on the performance and emission of a diesel engine fueled with Jatropha biodiesel oil and its blends , 2012 .

[6]  Ali Keskin,et al.  Influence of tall oil biodiesel with Mg and Mo based fuel additives on diesel engine performance and emission. , 2008, Bioresource technology.

[7]  M. Vijay Kumar,et al.  The impacts on combustion, performance and emissions of biodiesel by using additives in direct injection diesel engine , 2017 .

[8]  Klaus Kern,et al.  Elastic properties of chemically derived single graphene sheets. , 2008, Nano letters.

[9]  Dadan Kusdiana,et al.  Effects of water on biodiesel fuel production by supercritical methanol treatment. , 2004, Bioresource technology.

[10]  Y. Chisti Biodiesel from microalgae. , 2007, Biotechnology advances.

[11]  Jun Liu,et al.  Glucose biosensor based on immobilization of glucose oxidase in platinum nanoparticles/graphene/chitosan nanocomposite film. , 2009, Talanta.

[12]  Wei Sun,et al.  Direct electrochemistry with enhanced electrocatalytic activity of hemoglobin in hybrid modified electrodes composed of graphene and multi-walled carbon nanotubes. , 2013, Analytica chimica acta.

[13]  H. A. Soliman,et al.  Effects of diluent admissions and intake air temperature in exhaust gas recirculation on the emissions of an indirect injection dual fuel engine , 2001 .

[14]  H. Ozcan,et al.  Aluminum oxide and copper oxide nanodiesel fuel properties and usage in a compression ignition engine , 2016 .

[15]  R. Velraj,et al.  Influence of alumina nanoparticles, ethanol and isopropanol blend as additive with diesel–soybean biodiesel blend fuel: Combustion, engine performance and emissions , 2015 .

[16]  H. Aydin,et al.  Comparison of exhaust emissions of biodiesel–diesel fuel blends produced from animal fats , 2015 .

[17]  Pinkesh R. Shah,et al.  Influence of soy-lecithin as bio-additive with straight vegetable oil on CI engine characteristics , 2018 .

[18]  A. S. Ramadhas,et al.  Biodiesel production from high FFA rubber seed oil , 2005 .

[19]  M. Almeida,et al.  Effect of Crambe abyssinica oil degumming in phosphorus concentration of refined oil and derived biodiesel , 2017, Renewable Energy.

[20]  Ali K. Abdel-Rahman,et al.  Performance, combustion, and emission characteristics of a diesel engine fueled by biodiesel-diesel mixtures with multi-walled carbon nanotubes additives , 2017 .

[21]  H. Masjuki,et al.  Inhibition study of additives towards the corrosion of ferrous metal in palm biodiesel , 2016 .

[22]  Antonio Paolo Carlucci,et al.  Performance and emission characteristics of a CI engine using nano particles additives in biodiesel-diesel blends and modeling with GP approach , 2017 .

[23]  A. N. Ozsezen,et al.  Determination of performance and combustion characteristics of a diesel engine fueled with canola and waste palm oil methyl esters , 2011 .

[24]  N. Govindan,et al.  Emission characteristics of biodiesel obtained from jatropha seeds and fish wastes in a diesel engine , 2017 .

[25]  Chun Shun Cheung,et al.  Influence of waste cooking oil biodiesel on combustion, unregulated gaseous emissions and particulate emissions of a direct-injection diesel engine , 2017 .

[26]  R. B. Anand,et al.  Effect of Cerium Oxide Nanoparticles and Carbon Nanotubes as fuel-borne additives in Diesterol blends on the performance, combustion and emission characteristics of a variable compression ratio engine , 2014 .

[27]  Y. Sharma,et al.  Application of common nano-materials for removal of selected metallic species from water and wastewaters: A critical review , 2017 .

[28]  S. Vasudevan,et al.  Application of isotherm, kinetic and thermodynamic models for the adsorption of nitrate ions on graphene from aqueous solution , 2013 .

[29]  M. Kampa,et al.  Human health effects of air pollution. , 2008, Environmental pollution.

[30]  Muthusamy Sivakumar,et al.  Effect of aluminium oxide nanoparticles blended pongamia methyl ester on performance, combustion and emission characteristics of diesel engine , 2018 .

[31]  Adrian Todoruţ,et al.  Performance and emission characteristics of an CI engine fueled with diesel–biodiesel–bioethanol blends , 2010 .

[32]  R. Chandraprakash,et al.  Experimental Investigation of CI Engine Performance by Nano Additive in Biofuel , 2014 .

[33]  M. Dubé,et al.  Biodiesel production from waste cooking oil: 1. Process design and technological assessment. , 2003, Bioresource technology.

[34]  Sergio Machado Corrêa,et al.  Aromatic hydrocarbons emissions in diesel and biodiesel exhaust , 2006 .

[35]  H. Masjuki,et al.  Testing palm biodiesel and NPAA additives to control NOx and CO while improving efficiency in diesel engines. , 2008 .

[36]  Qaisar Mahmood,et al.  Potential of microalgal biodiesel production and its sustainability perspectives in Pakistan , 2018 .

[37]  G. R. Kannan,et al.  Effect of metal based additive on performance emission and combustion characteristics of diesel engine fuelled with biodiesel , 2011 .

[38]  Gholamhassan Najafi,et al.  The effect of combustion management on diesel engine emissions fueled with biodiesel-diesel blends , 2017 .

[39]  R. Ruoff,et al.  Graphene and Graphene Oxide: Synthesis, Properties, and Applications , 2010, Advanced materials.

[40]  J. Krahl,et al.  Effect of hydrazides as fuel additives for biodiesel and biodiesel blends on NOx formation , 2016 .

[41]  Olivera S. Stamenković,et al.  Application of nano CaO–based catalysts in biodiesel synthesis , 2017 .

[42]  Ayhan Demirbas,et al.  Impacts of additives on performance and emission characteristics of diesel engines during steady state operation , 2017 .

[43]  Mingming Zhu,et al.  Effect of a homogeneous combustion catalyst on the combustion characteristics and fuel efficiency in a diesel engine , 2012 .

[44]  A. Anbarasu,et al.  Performance and Emission Characteristics of a Diesel Engine Using Cerium Oxide Nanoparticle Blended Biodiesel Emulsion Fuel , 2016 .

[45]  S. S. Hoseini,et al.  Characterization of biodiesel production (ultrasonic-assisted) from evening-primroses (Oenothera lamarckiana) as novel feedstock and its effect on CI engine parameters , 2019, Renewable Energy.

[46]  D. Ganesh,et al.  Effect of nano-fuel additive on emission reduction in a biodiesel fuelled CI engine , 2011, 2011 International Conference on Electrical and Control Engineering.

[47]  I. M. Atadashi,et al.  The effects of catalysts in biodiesel production: A review , 2013 .

[48]  Gholamhassan Najafi,et al.  Diesel engine performance and exhaust emission analysis using waste cooking biodiesel fuel with an artificial neural network , 2009 .

[49]  J. Marchetti,et al.  A review on recent advancement in catalytic materials for biodiesel production. , 2015 .

[50]  Xiao Ma,et al.  Combustion and emission characteristics of a direct injection diesel engine fueled with biodiesel and PODE/biodiesel fuel blends , 2017 .

[51]  B. Ashok,et al.  Experimental studies on the effect of metal oxide and antioxidant additives with Calophyllum Inophyllum Methyl ester in compression ignition engine , 2017 .

[52]  Haji Hassan Masjuki,et al.  Effects of biodiesel from different feedstocks on engine performance and emissions: A review , 2015 .

[53]  K. Annamalai,et al.  An experimental analysis on the influence of fuel borne additives on the single cylinder diesel engine powered by Cymbopogon flexuosus biofuel , 2017 .

[54]  L. Qiao,et al.  Evaporation characteristics of fuel droplets with the addition of nanoparticles under natural and forced convections , 2011 .

[55]  Barat Ghobadian,et al.  Performance and emission characteristics of a CI engine fuelled with carbon nanotubes and diesel-biodiesel blends , 2017 .