Microstructure and mechanical properties of the α-SiAlON/α-SiC composites: Effects of heat treatment

[1]  D. Basu,et al.  Influence of SiC addition on tribological properties of SiAlON , 2011 .

[2]  D. Kim,et al.  Enhanced sintering of SiC using infiltration of preceramic polymer , 2011 .

[3]  D. Turan,et al.  High temperature bending creep behavior of a multi-cation doped α/β-SiAlON composite , 2011 .

[4]  Yu Zhou,et al.  Elongation of α‐SiC Particles in Spark Plasma Sintered α‐SiAlON/α‐SiC Composites , 2011 .

[5]  D. Bučevac,et al.  Toughening of SiC matrix with in-situ created TiB2 particles , 2010 .

[6]  O. Silva,et al.  α-SiAlON–SiC composites obtained by gas-pressure sintering and hot-pressing , 2007 .

[7]  O. Silva,et al.  Development of α-SiAlON-SiC ceramic composites by liquid phase sintering , 2007 .

[8]  M. Nygren,et al.  Homogeneity Region and Thermal Stability of Neodymium‐Doped α‐Sialon Ceramics , 2005 .

[9]  I. Chen,et al.  Effect of Seeding on the Microstructure and Mechanical Properties of α‐SiAlON: I, Y‐SiAlON , 2004 .

[10]  M. Nygren,et al.  Formation of in situ reinforced microstructures in α-sialon ceramics: Part III. Static and dynamic ripening , 2004 .

[11]  Michael J. Hoffmann,et al.  Effect of the Amount of Additives and Post-Heat Treatment on the Microstructure and Mechanical Properties of Yttrium–α-Sialon Ceramics , 2003 .

[12]  Joosung Kim,et al.  Effects of isothermal annealing on the microstructure and mechanical properties of SiC ceramics hot-pressed with Y2O3 and Al2O3 additions , 2002 .

[13]  M. Herrmann,et al.  The effect of processing conditions, amount of additives and composition on the microstructures and mechanical properties of α-SiAlON ceramics , 2002 .

[14]  K. Komeya,et al.  Inhomogeneous grain growth and elongation of Dy-α sialon ceramics at temperatures above 1800°C , 2000 .

[15]  Young‐Wook Kim,et al.  Strength and fracture toughness of in situ-toughened silicon carbide , 1997 .

[16]  T. Ekstrom,et al.  Simultaneously MoSi2 and SiC-reinforced α-SiAlON composites , 1997 .

[17]  Hong Wang,et al.  Microstructure and mechanical properties of nanoscale SiC/Ca α-SiAlON composites , 1997 .

[18]  S. Dong,et al.  Hot isostatic pressing and post-hot isostatic pressing of SiC-β-sialon composites , 1996 .

[19]  Chun-Hway Hsueh,et al.  Debonding of interfaces between beta-silicon nitride whiskers and SiAlY oxynitride glasses , 1996 .

[20]  L. C. Jonghe,et al.  In Situ Toughened Silicon Carbide with Al‐B‐C Additions , 1996 .

[21]  S. K. Lee.  Effects of [alpha]-SiC versus [beta]-SiC starting powders on microstructure and fracture toughness of SiC sintered with Al[sub 2]O[sub 3]-Y[sub 2]O[sub 3] additives , 1994 .

[22]  P. Becher.  Microstructural design of toughened ceramics , 1991 .

[23]  D. Clarke.  On the Equilibrium Thickness of Intergranular Glass Phases in Ceramic Materials , 1987 .

[24]  G. A. Slack,et al.  Solubility of Carbon in Silicon and Germanium , 1959 .