Damage tolerances of a railway axle in the presence of wheel polygonalizations

Abstract Damage tolerances of a railway axle in the presence of wheel polygonalization are investigated using a comprehensive coupled vehicle/track dynamic model. The model is formulated through coupling a typical high-speed train model and a slab track model, in which the wheelset, axle box and the slab track are treated as flexible bodies using the modal approach to account for the flexible deflections and dynamic stresses caused by the wheel ploygonalization-induced impact forces. The validity of this model is validated by using axle box vertical accelerations obtained from field tests. The dynamic stress in a railway axle is evaluated by using the modal stress recovery method in the proposed dynamic model, which is validated by the Finite Element Method (FEM). Using this comprehensive coupled/slab track dynamic model, the dynamic stresses developed in a railway axle due to the wheel polygonalization-induced impact forces are predicted, and subsequently used in the damage tolerance analyses to determine the residual lifetime of a railway axle in case of initial cracks. The results indicate that the wheel polygonalization can generate high magnitude impact forces at wheel/rail interfaces leading to remarkable increases in the stress states of a railway axle, and subsequently contribute to the propagations of cracks in the axle shaft. Consequently, a reasonable inspection interval for a high-speed train axles should be employed in the presence of wheel polygonalization.

[1]  J. J. Kalker,et al.  A Fast Algorithm for the Simplified Theory of Rolling Contact , 1982 .

[2]  S. Beretta,et al.  Corrosion–fatigue of A1N railway axle steel exposed to rainwater , 2010 .

[3]  Uwe Zerbst,et al.  Fracture mechanics in railway applications––an overview , 2005 .

[4]  Uwe Zerbst,et al.  Safe life and damage tolerance aspects of railway axles – A review , 2013 .

[5]  Michele Carboni,et al.  Experiments and stochastic model for propagation lifetime of railway axles , 2006 .

[6]  I. Varfolomeev,et al.  Fracture mechanics assessment of railway axles: Experimental characterization and computation , 2010 .

[7]  Janusz Frączek,et al.  Friction Models and Stress Recovery Methods in Vehicle Dynamics Modelling , 2005 .

[8]  Michael Luke,et al.  Fatigue crack growth in railway axles: Assessment concept and validation tests , 2011 .

[9]  Uwe Zerbst,et al.  The development of a damage tolerance concept for railway components and its demonstration for a railway axle , 2005 .

[10]  S. Beretta,et al.  An investigation of the effects of corrosion on the fatigue strength of AlN axle steel , 2008 .

[11]  Yukitaka Murakami,et al.  On the mechanism of fatigue failure in the superlong life regime (N>107 cycles). Part 1: influence of hydrogen trapped by inclusions , 2000 .

[12]  Maoru Chi,et al.  Influence of polygonal wear of railway wheels on the wheel set axle stress , 2015 .

[13]  A. S. Watson,et al.  A method of estimating railway axle stress spectra , 2011 .

[14]  Manicka Dhanasekar,et al.  A dynamic model for the vertical interaction of the rail track and wagon system , 2002 .

[15]  Kenji Hirakawa,et al.  Review of the fatigue damage tolerance of high-speed railway axles in Japan , 2011 .

[16]  Xuesong Jin,et al.  A study of the derailment mechanism of a high speed train due to an earthquake , 2012 .

[17]  Uwe Zerbst,et al.  An investigation on the influence of rotary bending and press fitting on stress intensity factors and fatigue crack growth in railway axles , 2008 .

[18]  Stefano Beretta,et al.  Variable amplitude fatigue crack growth in a mild steel for railway axles: Experiments and predictive models , 2011 .

[19]  Kenji Hirakawa,et al.  The analysis and prevention of failure in railway axles , 1998 .

[20]  Uwe Zerbst,et al.  Failure and damage tolerance aspects of railway components , 2011 .

[21]  Uwe Zerbst,et al.  Structural assessment of railway axles – A critical review , 2013 .

[22]  U. Zerbst,et al.  Parameters affecting the damage tolerance behaviour of railway axles , 2011 .

[23]  Takeshi Naito,et al.  Fatigue behavior of carburized steel with internal oxides and nonmartensitic microstructure near the surface , 1984 .