Modeling and simulation of transformer loading capability and hot spot temperature under harmonic conditions

Abstract Due to nonlinear loads, power frequency harmonics exist mainly in power systems so that they increase the losses and temperature inside the power transformer consequently. The hot spot temperature is one of the major limiting factors that affect the useful life of the power transformer and its loading. This paper presents the determination of field distribution on the transformer components using finite element method (FEM) and the calculations of hot spot and top oil temperature under harmonic conditions according to two techniques including dynamic thermal model and IEEE guide. The useful life of transformer is analyzed and the loading capability of transformer under harmonic conditions is furthermore verified using simulation in MATLAB.

[1]  E.F. Fuchs,et al.  Real-time monitoring of iron-core and copper losses of transformers Under(Non)Sinusoidal operation , 2006, IEEE Transactions on Power Delivery.

[2]  M. Dargahi,et al.  Derating of transformers under non-sinusoidal loads , 2008, 2008 11th International Conference on Optimization of Electrical and Electronic Equipment.

[3]  Zoran Radakovic,et al.  A new method for the calculation of the hot-spot temperature in power transformers with ONAN cooling , 2003 .

[4]  Jan C. Jofriet,et al.  Temperature distribution in foil winding for ventilated dry-type power transformers , 2010 .

[5]  M.K. Pradhan,et al.  Estimation of the hottest spot temperature (HST) in power transformers considering thermal inhomogeniety of the windings , 2004, IEEE Transactions on Power Delivery.

[6]  M. A. Taghikhani,et al.  Prediction of hottest spot temperature in power transformer windings with non-directed and directed oil-forced cooling , 2009 .

[7]  H. Abdullah,et al.  Thermal modeling of disc-type winding for ventilated dry-type transformers , 2010 .

[8]  Mohammad A. S. Masoum,et al.  Derating of Anisotropic Transformers under Nonsinusoidal Operating Conditions , 2003 .

[9]  Matthew N. O. Sadiku,et al.  Numerical Techniques in Electromagnetics , 2000 .

[10]  M. Lehtonen,et al.  Dynamic thermal modeling of power transformers: further Development-part II , 2006, IEEE Transactions on Power Delivery.

[11]  G. Swift,et al.  A fundamental approach to transformer thermal modeling. I. Theory and equivalent circuit , 2001 .

[12]  M. Lehtonen,et al.  Effect of harmonics on transformers loss of life , 2006, Conference Record of the 2006 IEEE International Symposium on Electrical Insulation.

[13]  E.F. Fuchs,et al.  Measurement of three-phase transformer derating and reactive power demand under nonlinear loading conditions , 2006, IEEE Transactions on Power Delivery.

[14]  K.T. Muthanna,et al.  Transformer insulation life assessment , 2006, IEEE Transactions on Power Delivery.

[15]  Jan C. Jofriet,et al.  Air temperature effect on thermal models for ventilated dry-type transformers , 2011 .

[16]  W.H. Tang,et al.  A simplified transformer thermal model based on thermal-electric analogy , 2004, IEEE Transactions on Power Delivery.

[17]  L. Jauregui-Rivera,et al.  Acceptability of Four Transformer Top-Oil Thermal Models—Part I: Defining Metrics , 2008, IEEE Transactions on Power Delivery.

[18]  Antonios G. Kladas,et al.  Harmonic Impact on Distribution Transformer No-Load Loss , 2010, IEEE Transactions on Industrial Electronics.