Annealing and thickness related performance and degradation of polymer solar cells

Abstract We investigated annealing and thickness related performance and degradation of bulk heterojunction solar cells based on regioregular poly(3-hexylthiophene) (RR-P3HT):[6,6]-phenyl C61-butyric acid methyl ester (PCBM). The devices were fabricated with slow drying for different active layer thicknesses (100–200 nm thick), followed by an identical thermal annealing. Photoinduced charge carrier generation and dissociation as well as series resistance were extracted from the device current–voltage characteristics and correlated to the active layer absorbance and morphology to understand the behavior of the fabricated devices. It was observed that with slow drying method the thickest absorber device had the highest efficiency but upon the followed thermal annealing it degraded while the thinnest one became substantially improved in performance. For the degraded device the charge carrier generation rate was found nearly unreduced, while the dissociation probability at maximum power voltage and series resistance largely deteriorated with thermal annealing. This implies a likely hampered charge transport and increased recombination losses with a discontinuation of the bi-phase networks caused by a further phase separation in the heat treatment. Thus, morphology control for effective charge transport appears crucial to the device performance and stability, and taking into account the active layer thickness effect in annealing is important.

[1]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[2]  Gang Li,et al.  Vertical Phase Separation in Poly(3‐hexylthiophene): Fullerene Derivative Blends and its Advantage for Inverted Structure Solar Cells , 2009 .

[3]  N. S. Sariciftci,et al.  Substituting the postproduction treatment for bulk-heterojunction solar cells using chemical additives , 2008 .

[4]  Ching-Fuh Lin,et al.  Lengthening the polymer solidification time to improve the performance of polymer/ZnO nanorod hybrid solar cells , 2009 .

[5]  Chun-Wei Chen,et al.  Investigation of nanoscale morphological changes in organic photovoltaics during solvent vapor annealing , 2008 .

[6]  Juan Bisquert,et al.  Charge carrier mobility and lifetime of organic bulk heterojunctions analyzed by impedance spectroscopy , 2008 .

[7]  Charles L. Braun,et al.  Electric field assisted dissociation of charge transfer states as a mechanism of photocarrier production , 1984 .

[8]  M. Umeno,et al.  Nanostructured morphology of P3HT:PCBM bulk heterojunction solar cells , 2010 .

[9]  Christoph J. Brabec,et al.  Transient optical studies of charge recombination dynamics in a polymer/fullerene composite at room temperature , 2002 .

[10]  Sheng-Fu Horng,et al.  Extraction of solar cell series resistance without presumed current–voltage functional form , 2010 .

[11]  A. J. Heeger,et al.  Photoinduced Electron Transfer from a Conducting Polymer to Buckminsterfullerene , 1992, Science.

[12]  D. Qin,et al.  The optimized morphology of polymer:fullerene bulk heterojunction thin film via reducing pressure , 2010 .

[13]  H. Sirringhaus,et al.  Effect of interchain interactions on the absorption and emission of poly(3-hexylthiophene) , 2003 .

[14]  Wilbur Dexter Johnston.  Solar Voltaic Cells , 1980 .

[15]  Yun Zhao,et al.  Solvent-vapor treatment induced performance enhancement of poly(3-hexylthiophene):methanofullerene bulk-heterojunction photovoltaic cells , 2007 .

[16]  V. Mihailetchi,et al.  Photocurrent generation in polymer-fullerene bulk heterojunctions. , 2004, Physical review letters.

[17]  V. Mihailetchi,et al.  Space-charge limited photocurrent. , 2005, Physical review letters.

[18]  R. D. Bettignies,et al.  Discriminating bulk, surface and interface aging effects in polymer-based active materials for efficient photovoltaic devices , 2010 .

[19]  W. Su,et al.  Study of the effect of annealing process on the performance of P3HT/PCBM photovoltaic devices using scanning-probe microscopy , 2009 .

[20]  Annalisa Bonfiglio,et al.  Influence of thermal ageing on the stability of polymer bulk heterojunction solar cells , 2007 .

[21]  Carole Sentein,et al.  Accelerated lifetime measurements of P3HT:PCBM solar cells , 2006 .

[22]  C. Brabec,et al.  Plastic Solar Cells , 2001 .

[23]  Valentin D. Mihailetchi,et al.  Device model for the operation of polymer/fullerene bulk heterojunction solar cells , 2005 .

[24]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[25]  Antonio Cerdeira,et al.  Influence of P3HT: PCBM blend preparation on the active layer morphology and cell degradation , 2011, Microelectron. Reliab..

[26]  Ruth Shinar,et al.  Simple routes for improving polythiophene:fullerene-based organic solar cells , 2011 .

[27]  Kazuhito Hashimoto,et al.  Morphological Stabilization of Polymer Photovoltaic Cells by Using Cross-Linkable Poly(3-(5-hexenyl)thiophene) , 2009 .

[28]  Garry Rumbles,et al.  Pathways for the degradation of organic photovoltaic P3HT:PCBM based devices , 2008 .

[29]  Donal D. C. Bradley,et al.  Bimolecular recombination losses in polythiophene: Fullerene solar cells , 2008 .

[30]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.

[31]  L. Onsager.  Deviations from Ohm's Law in Weak Electrolytes , 1934 .

[32]  Temperature dependent characteristics of poly(3 hexylthiophene)-fullerene based heterojunction organic solar cells , 2003 .

[33]  H. Tsuji,et al.  Surface segregation at the aluminum interface of poly(3-hexylthiophene)/ fullerene solar cells , 2010 .

[34]  Xiaoniu Yang,et al.  The formation of crystalline P3HT fibrils upon annealing of a PCBM:P3HT bulk heterojunction , 2006 .

[35]  Etienne Goovaerts,et al.  Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer: fullerene solar cells , 2008 .

[36]  Oliver Ambacher,et al.  Effects of solvent and annealing on the improved performance of solar cells based on poly(3-hexylthiophene): Fullerene , 2005 .