High ion conducting polymer nanocomposite electrolytes using hybrid nanofillers.

There is a growing shift from liquid electrolytes toward solid polymer electrolytes, in energy storage devices, due to the many advantages of the latter such as enhanced safety, flexibility, and manufacturability. The main issue with polymer electrolytes is their lower ionic conductivity compared to that of liquid electrolytes. Nanoscale fillers such as silica and alumina nanoparticles are known to enhance the ionic conductivity of polymer electrolytes. Although carbon nanotubes have been used as fillers for polymers in various applications, they have not yet been used in polymer electrolytes as they are conductive and can pose the risk of electrical shorting. In this study, we show that nanotubes can be packaged within insulating clay layers to form effective 3D nanofillers. We show that such hybrid nanofillers increase the lithium ion conductivity of PEO electrolyte by almost 2 orders of magnitude. Furthermore, significant improvement in mechanical properties were observed where only 5 wt % addition of the filler led to 160% increase in the tensile strength of the polymer. This new approach of embedding conducting-insulating hybrid nanofillers could lead to the development of a new generation of polymer nanocomposite electrolytes with high ion conductivity and improved mechanical properties.

[1]  S. Gan,et al.  ATR-FTIR studies on ion interaction of lithium perchlorate in polyacrylate/poly(ethylene oxide) blends. , 2010, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[2]  Y. Gun’ko,et al.  Recent Advances in Research on Carbon Nanotube–Polymer Composites , 2010, Advanced materials.

[3]  Zhipei Sun,et al.  Nanotube–Polymer Composites for Ultrafast Photonics , 2009 .

[4]  Gang Chen,et al.  Nanoscale design to enable the revolution in renewable energy , 2009, Energy & Environmental Science.

[5]  K. Lau,et al.  Fabrication and properties of clay-supported carbon nanotube/poly (vinyl alcohol) nanocomposites , 2009 .

[6]  J. Douglas,et al.  Suppression of crystallization in a plastic crystal electrolyte (SN/LiClO4) by a polymeric additive (polyethylene oxide) for battery applications , 2009 .

[7]  K. Lau,et al.  Fabrication and mechanical properties of exfoliated clay-CNTs/epoxy nanocomposites , 2008 .

[8]  M. Armand,et al.  Building better batteries , 2008, Nature.

[9]  Soojin Park,et al.  Ionic conductivity of polymeric nanocomposite electrolytes based on poly(ethylene oxide) and organo-clay materials , 2008 .

[10]  J. Coleman,et al.  Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites , 2006 .

[11]  K. S. Nahm,et al.  Review on composite polymer electrolytes for lithium batteries , 2006 .

[12]  I. Phang,et al.  Growth of Carbon Nanotubes on Clay: Unique Nanostructured Filler for High‐Performance Polymer Nanocomposites , 2006 .

[13]  T. Kerdcharoen,et al.  First principles study of Li and Li+ adsorbed on carbon nanotube: Variation of tubule diameter and length , 2005 .

[14]  Jian Zhou,et al.  Ionic conductivity of composite electrolytes based on oligo(ethylene oxide) and fumed oxides , 2004 .

[15]  Suprakas Sinha Ray,et al.  POLYMER/LAYERED SILICATE NANOCOMPOSITES: A REVIEW FROM PREPARATION TO PROCESSING , 2003 .

[16]  Giselle Sandí-Tapia,et al.  Polymer nanocomposites for lithium battery applications , 2003 .

[17]  S. Dou,et al.  Nanoparticle-dispersed PEO polymer electrolytes for Li batteries , 2003 .

[18]  H. Moon,et al.  Role of functional nano-sized inorganic fillers in poly(ethylene) oxide-based polymer electrolytes , 2003 .

[19]  Feng-Chih Chang,et al.  Solid-state electrolyte nanocomposites based on poly(ethylene oxide), poly(oxypropylene) diamine, mineral clay and lithium perchlorate , 2002 .

[20]  D. Macfarlane,et al.  The effect of nano-particle TiO2 fillers on structure and transport in polymer electrolytes , 2002 .

[21]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[22]  H. J. Walls,et al.  Fumed silica-based composite polymer electrolytes: synthesis, rheology, and electrochemistry , 2000 .

[23]  Felix B. Dias,et al.  Trends in polymer electrolytes for secondary lithium batteries , 2000 .

[24]  V. N. Plakhotnik,et al.  Electrolytes for Lithium Batteries on the Basis of Complex Fluorides and Aprotic Media , 2000 .

[25]  Nobuyuki Imanishi,et al.  Enhanced Lithium‐Ion Transport in PEO‐Based Composite Polymer Electrolytes with Ferroelectric BaTiO3 , 1999 .

[26]  J. R. Stevens,et al.  Effect of Salt Concentration on the Conductivity of PEO-Based Composite Polymeric Electrolytes , 1998 .

[27]  Jun Hou,et al.  Composite polymer electrolytes using surface-modified fumed silicas: conductivity and rheology , 1998 .

[28]  B. Scrosati,et al.  Nanocomposite polymer electrolytes for lithium batteries , 1998, Nature.

[29]  W. Meyer,et al.  Polymer electrolytes for lithium-ion batteries. , 1998, Advanced materials.

[30]  Xiaofang Yang,et al.  Development of a new plasticizer for poly(ethylene oxide)-based polymer electrolyte and the investigation of their ion-pair dissociation effect , 1994 .

[31]  H. S. Lee,et al.  Ionic conductivity of a polymer electrolyte with modified carbonate as a plasticizer for poly(ethylene oxide) , 1994 .

[32]  C. Angell,et al.  Rubbery solid electrolytes with dominant cationic transport and high ambient conductivity , 1993, Nature.

[33]  M. D. Glasse,et al.  The effect of plasticiser on zinc polymer electrolytes , 1989 .

[34]  Alain Guyot,et al.  Polymer electrolytes , 1985, Polymer Bulletin.

[35]  B. Steele,et al.  Effects of inert fillers on the mechanical and electrochemical properties of lithium salt-poly(ethylene oxide) polymer electrolytes , 1982 .

[36]  M. Ratner,et al.  Structure and ion transport in polymer-salt complexes , 1981 .