Ergonomic analysis of working postures using OWAS in semi-trailer assembly, applying an individual sampling strategy

In semi-trailer assembly, workers are exposed to several physical risk factors. Awkward working postures have not yet been investigated in semi-trailer assembly, although they are known to be a major risk factor for musculoskeletal disorders. We therefore conducted a comprehensive ergonomic analysis of working postures using the Ovako working posture analysing system (OWAS), with an individual sampling strategy. The postural load in semi-trailer assembly was assessed on the basis of 20,601 observations of 63 workers executing a representative set of nine work tasks. According to the OWAS, the postural load of various working postures and body part positions may have a harmful effect on the musculoskeletal system. We therefore give examples of corrective measures that could improve awkward working postures. Applying an individual sampling strategy was revealed to have advantages over a collective strategy, so this is recommended for future ergonomic analyses.

[1]  J. R. Landis,et al.  The measurement of observer agreement for categorical data. , 1977, Biometrics.

[2]  W Karwowski,et al.  LUBA: an assessment technique for postural loading on the upper body based on joint motion discomfort and maximum holding time. , 2001, Applied ergonomics.

[3]  Ralph Bruder,et al.  The European Assembly Worksheet , 2013 .

[4]  Tzu-Hsien Lee,et al.  Analysis of Working Postures at a Construction Site Using the OWAS Method , 2013, International journal of occupational safety and ergonomics : JOSE.

[5]  J. Douwes,et al.  Prevalence of musculoskeletal symptoms in relation to gender, age, and occupational/industrial group , 2011 .

[6]  W. Rohmert.  Ergonomics: Concept of work, stress and strain. , 1986 .

[7]  Neil Pearce,et al.  Gender differences in work-related risk factors associated with low back symptoms , 2012, Ergonomics.

[8]  T. Keefe,et al.  Low Back Pain Among Residential Carpenters: Ergonomic Evaluation Using OWAS and 2D Compression Estimation , 2007, International journal of occupational safety and ergonomics : JOSE.

[9]  Seppo Väyrynen,et al.  Some links between accidents, postural load and accessibility in chemical plant maintenance , 1994 .

[10]  G. David.  Ergonomic methods for assessing exposure to risk factors for work-related musculoskeletal disorders. , 2005, Occupational medicine.

[11]  O Karhu,et al.  Correcting working postures in industry: A practical method for analysis. , 1977, Applied ergonomics.

[12]  L McAtamney,et al.  RULA: a survey method for the investigation of work-related upper limb disorders. , 1993, Applied ergonomics.

[13]  N Nevala-Puranen,et al.  Reduction of farmers' postural load during occupationally oriented medical rehabilitation. , 1995, Applied ergonomics.

[14]  Waldemar Karwowski,et al.  A Comparison of Three Observational Techniques for Assessing Postural Loads in Industry , 2007, International journal of occupational safety and ergonomics : JOSE.

[15]  S Hignett,et al.  Rapid entire body assessment (REBA). , 2000, Applied ergonomics.

[16]  L Veikko,et al.  OWAS : a method for the evaluation of postural load during work , 1992 .

[17]  J P Callaghan,et al.  The effect of camera viewing angle on posture assessment repeatability and cumulative spinal loading , 2007, Ergonomics.

[18]  W Karwowski,et al.  Analysis of working postures in hammering tasks on building construction sites using the computerized OWAS method. , 1993, Applied ergonomics.

[19]  Tomasz Tokarski,et al.  Analysis of Postural Load During Tasks Related to Milking Cows—A Case Study , 2011, International journal of occupational safety and ergonomics : JOSE.

[20]  Monique Lortie,et al.  Observation Procedures Characterizing Occupational Physical Activities: Critical Review , 2000, International journal of occupational safety and ergonomics : JOSE.

[21]  Berman Kayis,et al.  A Multilevel Approach to Manual Lifting in Manufacturing Industries. , 1996, International journal of occupational safety and ergonomics : JOSE.

[22]  F. Liebers,et al.  Alters- und berufsgruppenabhängige Unterschiede in der Arbeitsunfähigkeit durch häufige Muskel-Skelett-Erkrankungen , 2013, Bundesgesundheitsblatt - Gesundheitsforschung - Gesundheitsschutz.

[23]  Alex Burdorf,et al.  An evaluation of methods assessing the physical demands of manual lifting in scaffolding. , 2005, Applied ergonomics.

[24]  Waldemar Karwowski,et al.  The Relationships Between Biomechanical and Postural Stresses, Musculoskeletal Injury Rates, and Perceived Body Discomfort Experienced by Industrial Workers: A Field Study , 2002, International journal of occupational safety and ergonomics : JOSE.

[25]  Waldemar Karwowski,et al.  The occupational ergonomics handbook , 2006 .

[26]  G Govaert,et al.  Postural load and back pain of workers in the manufacturing of prefabricated concrete elements. , 1991, Ergonomics.

[27]  P. Buckle,et al.  Current techniques for assessing physical exposure to work-related musculoskeletal risks, with emphasis on posture-based methods. , 1999, Ergonomics.

[28]  Kai Way Li,et al.  Postural Analysis of Four Jobs on Two Building Construction Sites: an Experience of Using the OWAS Method in Taiwan , 1999 .

[29]  Svend Erik Mathiassen,et al.  Systematic evaluation of observational methods assessing biomechanical exposures at work. , 2010, Scandinavian journal of work, environment & health.

[30]  Joachim Vedder,et al.  Identifying postural hazards with a video-based occurrence sampling method , 1998 .

[31]  Tamal Das,et al.  An Ergonomics Study on Posture-Related Discomfort and Occupational-Related Disorders Among Stonecutters of West Bengal, India , 2010, International journal of occupational safety and ergonomics : JOSE.

[32]  Jacob Cohen.  A Coefficient of Agreement for Nominal Scales , 1960 .

[33]  Jose Antonio Diego-Mas,et al.  Using Kinect™ sensor in observational methods for assessing postures at work. , 2014, Applied ergonomics.

[34]  Lia Buarque de Macedo Guimarães,et al.  Ergonomic assessment of suspended scaffolds , 2006 .

[35]  A Burdorf,et al.  Exposure assessment strategies for work-related risk factors for musculoskeletal disorders. , 1999, Scandinavian journal of work, environment & health.

[36]  W. M. Keyserling,et al.  Back disorders and nonneutral trunk postures of automobile assembly workers. , 1991, Scandinavian journal of work, environment & health.

[37]  Danuta Roman-Liu,et al.  Comparison of concepts in easy-to-use methods for MSD risk assessment. , 2014, Applied ergonomics.

[38]  M R Drost,et al.  Physical workload of ambulance assistants. , 1995, Ergonomics.