Simultaneous three-dimensional step-height measurement and high-resolution tomographic imaging with a spectral interferometric microscope.

A noncontact, nonmechanical scanning, wide-field spectral interference microscope is developed for simultaneous measurement of three-dimensional step-height of discontinuous objects and tomographic imaging. A superluminescent diode (SLD) is used as a broadband light source and a liquid-crystal Fabry-Perot interferometer (LC-FPI) as a frequency-scanning device. By means of changing the injection current to the SLD, the spectral profile of the SLD is equalized, and a constant light input to the interferometer is achieved over the entire frequency-scan range. The Fourier-transform technique is used to determine both the amplitude and the phase of spectral fringe signals. Three-dimensional height distribution of a discontinuous object is obtained from the phase information, whereas optically sectioned images of the object are obtained either from the amplitude information alone or from the combination of both the amplitude and phase information. Experimental results with submicrometer resolution are presented for both step-height measurement and tomographic sectioning.

[1]  M. Takeda,et al.  Wavelength-shift interferometry for distance measurements using the Fourier transform technique for fringe analysis. , 1991, Applied optics.

[2]  T Yoshimura,et al.  Simultaneous measurements of three-dimensional reflectivity distributions in scattering media based on optical frequency-domain reflectometry. , 1998, Optics letters.

[3]  G E Sommargren,et al.  Optical heterodyne profilometry. , 1981, Applied optics.

[4]  Kiyofumi Matsuda,et al.  Rough surface profile measurement using Speckle Optical Frequency Domain Reflectometry with an external cavity tunable diode laser , 1996 .

[5]  T. Kurokawa,et al.  Tunable light source using a liquid-crystal Fabry-Perot interferometer , 1991, IEEE Photonics Technology Letters.

[6]  S. Wada,et al.  Surface Shape Measurement by Wavelength Scanning Interferometry Using an Electronically Tuned Ti:sapphire Laser , 2001 .

[7]  Hans J. Tiziani,et al.  Wavelength-shift speckle interferometry for absolute profilometry using a mode-hop free external cavity diode laser , 1997 .

[8]  G. Häusler,et al.  Three-dimensional sensing of rough surfaces by coherence radar. , 1992, Applied optics.

[9]  J. Fujimoto,et al.  Optical coherence tomography using a frequency-tunable optical source. , 1997, Optics letters.

[10]  J. Fujimoto,et al.  Optical Coherence Tomography , 1991 .

[11]  M. Takeda,et al.  Fourier-transform speckle profilometry: three-dimensional shape measurements of diffuse objects with large height steps and/or spatially isolated surfaces. , 1994, Applied optics.

[12]  T C Strand,et al.  Profilometry with a coherence scanning microscope. , 1990, Applied optics.

[13]  S. A. Kingsley,et al.  OFDR diagnostics for fibre and integrated-optic systems , 1985 .

[14]  L. Deck,et al.  High-speed noncontact profiler based on scanning white-light interferometry. , 1994, Applied optics.

[15]  Harald Sattmann,et al.  A thermal light source technique for optical coherence tomography , 2000 .

[16]  Takashi Kurokawa,et al.  Tunable liquid-crystal Fabry-Perot interferometer filter for wavelength-division multiplexing communication systems , 1993 .

[17]  M. Takeda,et al.  Fourier-transform method of fringe-pattern analysis for computer-based topography and interferometry , 1982 .

[18]  John A. Hoffnagle,et al.  Optical heterodyne interferometry , 1986, Annual Meeting Optical Society of America.

[19]  T Kurokawa,et al.  Optical frequency-domain imaging microprofilometry with a frequency-tunable liquid-crystal Fabry-Perot etalon device. , 1999, Applied optics.

[20]  I. Yamaguchi,et al.  Wavelength scanning profilometry for real-time surface shape measurement. , 1997, Applied optics.

[21]  M. K. Kim,et al.  Wavelength-scanning digital interference holography for optical section imaging. , 1999, Optics letters.