Inline capacitive and DC-contact MEMS shunt switches

This paper presents inline capacitive MEMS shunt switches suitable for X/K-band and Ka/V-band applications. The inline switch allows for a low- or high-inductance connection to the ground plane without changing the mechanical characteristics of the MEMS bridge. Excellent isolation and loss are achieved with this design, and the performance is very similar to the standard capacitive MEMS shunt switch. Also, a new metal-to-metal contact MEMS shunt switch is presented. A novel pull-down electrode is used which applies the electrostatic force at the same location as the metal-to-metal contact area. A contact resistance of 0.15-0.35 /spl Omega/ is repeatable, and results in an isolation of -40 dB at 0.1-3 GHz. The measured isolation is still better than -20 dB at 40 GHz. The application areas are in high-isolation/low-loss switches for telecommunication and radar systems.

[1]  Gabriel M. Rebeiz,et al.  High-isolation W-band MEMS switches , 2001, IEEE Microwave and Wireless Components Letters.

[2]  K. Sarabandi,et al.  MEMS devices for high isolation switching and tunable filtering , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[3]  Gabriel M. Rebeiz,et al.  High-isolation CPW MEMS shunt switches. 2. Design , 2000 .

[4]  Adele E. Schmitz,et al.  GaAs-compatible surface-micromachined RF MEMS switches , 1999 .

[5]  S. Eshelman,et al.  Performance of low-loss RF MEMS capacitive switches , 1998 .

[6]  Gabriel M. Rebeiz,et al.  High-isolation CPW MEMS shunt switches. 1. Modeling , 2000 .

[7]  Adele E. Schmitz,et al.  Surface-micromachined RF MEMs switches on GaAs substrates , 1999 .

[8]  J.A. Higgins,et al.  MEM relay for reconfigurable RF circuits , 2001, IEEE Microwave and Wireless Components Letters.