A compact 30 GHz low loss balanced hybrid coupler fabricated using micromachined integrated coax

Recent years have seen increased interest in the K and Ka frequency bands due to continued growth of satellite communications, particularly the USA Air Force Wideband Gapfiller Satellite (WGS) programme. This work presents a 4-port 30-GHz quadrature hybrid coupler fabricated using micromachined integrated coaxial line. The best electrical performance was measured at 31.6 GHz, where the amplitude and phase difference between the through and coupled ports are within 0.23 dB and 1.5/spl deg/, respectively, of the nominal -3 dB, 90/spl deg/ design specification. The excess losses for the through and coupled port at 31.6 GHz are 0.31 dB and 0.54 dB. The overall footprint of the component is /spl lambda//10 by /spl lambda//5 at 30 GHz (1.0 /spl times/ 1.7 mm), making this hybrid extremely small compared to alternative waveguide or coaxial designs. We believe this is the smallest coaxial hybrid coupler ever fabricated for 30-GHz.

[1]  R.T. Chen,et al.  A compact low-loss Ka-band filter using 3-dimensional micromachined integrated coax , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[2]  Elliott R. Brown,et al.  Characteristics of microfabricated rectangular coax in the Ka band , 2004 .

[3]  F. Tseng,et al.  EFAB: rapid, low-cost desktop micromachining of high aspect ratio true 3-D MEMS , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[4]  J. R. Reid,et al.  A 60 GHz branch line coupler fabricated using integrated rectangular coaxial lines , 2004, 2004 IEEE MTT-S International Microwave Symposium Digest (IEEE Cat. No.04CH37535).