An Enabling Study of Low Temperature Combustion With Ethanol in a Diesel Engine

Previous research indicates that the low temperature combustion (LTC) is capable of producing ultra-low nitrogen oxides (NOx) and soot emissions. The LTC in diesel engines can be enabled by the use of heavy exhaust gas recirculation (EGR) at moderate engine loads. However, when operating at higher engine loads, elevated demands of both intake boost and EGR levels to ensure ultra-low emissions make engine controllability a challenging task. In this work, a multifuel combustion strategy is implemented to improve the emission performance and engine controllability at higher engine loads. The port fueling of ethanol is ignited by the direct injection of diesel fuel. The ethanol impacts on the engine emissions, ignition delay, heat-release shaping, and cylinder-charge cooling have been empirically analyzed with the sweeps of different ethanol-to-diesel ratios. Zero-dimensional phenomenological engine cycle simulations have been conducted to supplement the empirical work. The multifuel combustion of ethanol and diesel produces lower emissions of NOx and soot while maintaining the engine efficiency. The experimental setup and study cases are described, and the potential for the application of an ethanol-to-diesel multifuel system at higher loads has been proposed and discussed.

[1]  Wallace L. Chippior,et al.  The NOx and N2O Emission Characteristics of an HCCI Engine Operated With N-Heptane , 2012 .

[2]  Ramkumar N. Parthasarathy,et al.  Effects of Fuel Injection Timing in the Combustion of Biofuels in a Diesel Engine at Partial Loads , 2011 .

[3]  On the Relationship Between Fuel Injection Pressure and Two-Stage Ignition Behavior of Low Temperature Diesel Combustion , 2012 .

[4]  Rakesh Kumar Maurya,et al.  Experimental study of combustion and emission characteristics of ethanol fuelled port injected homogeneous charge compression ignition (HCCI) combustion engine , 2011 .

[5]  Ludivine Pidol,et al.  Ethanol–biodiesel–Diesel fuel blends: Performances and emissions in conventional Diesel and advanced Low Temperature Combustions , 2012 .

[6]  Xiaoye Han,et al.  Precise instrumentation of a diesel single-cylinder research engine , 2011 .

[7]  J. G. Hawley,et al.  Diesel engine exhaust gas recirculation--a review on advanced and novel concepts , 2004 .

[8]  Su Han Park,et al.  Effect of Biodiesel-Ethanol Blended Fuel Spray Characteristics on the Reduction of Exhaust Emissions in a Common-Rail Diesel Engine , 2010 .

[9]  Graham T. Reader,et al.  Energy efficiency improvement strategies for a diesel engine in low‐temperature combustion , 2009 .

[10]  Wang Jian-xin,et al.  Study on combustion characteristics and PM emission of diesel engines using ester–ethanol–diesel blended fuels , 2007 .

[11]  D. Hulwan,et al.  Performance, emission and combustion characteristic of a multicylinder DI diesel engine running on diesel–ethanol–biodiesel blends of high ethanol content , 2011 .

[12]  Bertrand Lecointe,et al.  Impact of fuel characteristics on HCCI combustion: Performances and emissions , 2010 .

[13]  Wallace L. Chippior,et al.  An Experimental Investigation of HCCI Combustion Stability Using N-Heptane , 2012 .