PV balancers: Concept, architectures, and realization

This paper presents a new concept of module-integrated converters called PV balancers for photovoltaic applications. The proposed concept enables independent maximum power point tracking (MPPT) for each module, and dramatically decreases the requirements for power converters. The power rating of a PV balancer is less than 20% of its counterparts, and the manufacturing cost is thus significantly reduced. In this paper, two architectures of PV balancers are proposed, analyzed, realized, and verified through simulation and experimental results. It is anticipated that the proposed approach will be a low-cost solution for future photovoltaic power systems.

[1]  Johann W. Kolar,et al.  Classification and Comparative Evaluation of PV Panel-Integrated DC–DC Converter Concepts , 2012, IEEE Transactions on Power Electronics.

[2]  T. Suntio,et al.  Dynamic Properties of Current-Fed Quadratic Full-Bridge Buck Converter for Distributed Photovoltaic MPP-Tracking Systems , 2012, IEEE Transactions on Power Electronics.

[3]  P. T. Krein,et al.  Differential Power Processing for Increased Energy Production and Reliability of Photovoltaic Systems , 2013, IEEE Transactions on Power Electronics.

[4]  Toshihisa Shimizu,et al.  Generation control circuit for photovoltaic modules , 2001 .

[5]  Philip T. Krein,et al.  Cost-Effective Hundred-Year Life for Single-Phase Inverters and Rectifiers in Solar and LED Lighting Applications Based on Minimum Capacitance Requirements and a Ripple Power Port , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[6]  D. Maksimovic,et al.  Architectures and Control of Submodule Integrated DC–DC Converters for Photovoltaic Applications , 2013, IEEE Transactions on Power Electronics.

[7]  $1/W Photovoltaic Systems , 2010 .

[8]  Robert W. Erickson,et al.  Improved Energy Capture in Series String Photovoltaics via Smart Distributed Power Electronics , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[9]  Charles R. Sullivan,et al.  High-efficiency inverter for photovoltaic applications , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[10]  R. M. Button.  An advanced photovoltaic array regulator module , 1996, IECEC 96. Proceedings of the 31st Intersociety Energy Conversion Engineering Conference.

[11]  Yehui Han,et al.  PV balancers: Concept, architectures, and realization , 2012, ECCE 2012.

[12]  F. Blaabjerg,et al.  A review of single-phase grid-connected inverters for photovoltaic modules , 2005, IEEE Transactions on Industry Applications.

[13]  Sang Hee Kang,et al.  Efficiency Optimization in Digitally Controlled Flyback DC–DC Converters Over Wide Ranges of Operating Conditions , 2012, IEEE Transactions on Power Electronics.

[14]  Yehui Han,et al.  Analysis of high efficiency DC/DC converter processing partial input/output power , 2013, 2013 IEEE 14th Workshop on Control and Modeling for Power Electronics (COMPEL).

[15]  David J. Perreault,et al.  A single-phase photovoltaic inverter topology with a series-connected power buffer , 2010, 2010 IEEE Energy Conversion Congress and Exposition.