Saturated Coordination LuN6 Defect Sites for Highly Efficient Electroreduction of CO2.

Metal single-atom and internal structural defects typically coexist in M-N-C materials obtained through the existing basic pyrolysis processes. Identifying a correlation between them to understand the structure-activity relationship and achieve efficient catalytic performance is important, particularly for the rare-earth (RE) elements with rich electron orbitals and strong coordination capabilities. Herein, a novel single-atom catalyst based on the RE element lutetium is successfully synthesized on a N-C support. Structural and simulation analyses demonstrate that the formation of a LuN6 structural site with an individual defect because of pyrolysis is thermodynamically favorable in Lu-N-C. Using KHCO3 -based electrolytes facilitates the fall of the K+ cations into the defective sites of Lu-N-C, thus enabling improved CO2 capture and activation, which increases the catalyst conductivity for Lu-N-C. In this study, the catalyst exhibits a Faradaic efficiency of 95.1% for CO at a current density of 18.2 mA cm-2 during carbon dioxide reduction reaction. This study thus provides new insights into understanding RE-N-C materials for energy utilization.

[1]  M. Liu,et al.  CO2 electroreduction to multicarbon products in strongly acidic electrolyte via synergistically modulating the local microenvironment , 2022, Nature communications.

[2]  A. Turchanin,et al.  Polarity, intramolecular charge transfer, and hydrogen bond co-mediated solvent effects on the optical properties of graphene quantum dots , 2022, Nano Research.

[3]  Guomin Xia,et al.  In-situ N-defect and single-metal atom synergetic engineering of high-efficiency Ag–N–C electrocatalysts for CO2 reduction , 2022, Applied Catalysis B: Environmental.

[4]  Yu Zhou,et al.  N‐Doped sp2/sp3 Carbon Derived from Carbon Dots to Boost the Performance of Ruthenium for Efficient Hydrogen Evolution Reaction , 2022, Small methods.

[5]  V. Sglavo,et al.  Impact of reducing conditions on the stabilization of Mg0.2Co0.2Ni0.2Cu0.2Zn0.2O high entropy oxide , 2022, Ceramics International.

[6]  Zhichuan J. Xu,et al.  Nitrogen‐Rich Carbonaceous Materials for Advanced Oxygen Electrocatalysis: Synthesis, Characterization, and Activity of Nitrogen Sites , 2022, Advanced Functional Materials.

[7]  Kaitlin M. McCardle Theoretical insights into single-atom catalysts , 2022, Nature Computational Science.

[8]  J. Guan,et al.  Optimizing the Electrocatalytic Selectivity of Carbon Dioxide Reduction Reaction by Regulating the Electronic Structure of Single‐Atom M‐N‐C Materials , 2022, Advanced Functional Materials.

[9]  Hao Li,et al.  Thermal migration towards constructing W-W dual-sites for boosted alkaline hydrogen evolution reaction , 2022, Nature communications.

[10]  X. Yang,et al.  Sulfur-doped unsaturated Ni-N3 coordination for efficient electroreduction of CO2 , 2022, Chemical Engineering Journal.

[11]  Shenglin Xiong,et al.  Defect‐Selectivity and “Order‐in‐Disorder” Engineering in Carbon for Durable and Fast Potassium Storage , 2021, Advanced materials.

[12]  Yanshan Gao,et al.  Electrochemical Reduction of CO2 to CO over Transition Metal/N‐Doped Carbon Catalysts: The Active Sites and Reaction Mechanism , 2021, Advanced science.

[13]  Tej S. Choksi,et al.  Molecule Confined Isolated Metal Sites Enable the Electrocatalytic Synthesis of Hydrogen Peroxide , 2021, Advanced materials.

[14]  S. Liao,et al.  Advanced Atomically Dispersed Metal–Nitrogen–Carbon Catalysts Toward Cathodic Oxygen Reduction in PEM Fuel Cells , 2021 .

[15]  Zhen Zhou,et al.  Three-Dimensional Graphene-Based Macrostructures for Electrocatalysis. , 2021, Small.

[16]  Evan C. Wegener,et al.  Performance enhancement and degradation mechanism identification of a single-atom Co–N–C catalyst for proton exchange membrane fuel cells , 2020, Nature Catalysis.

[17]  D. Cullen,et al.  Engineering Atomically Dispersed FeN 4 Active Sites for CO 2 Electroreduction , 2020 .

[18]  Xiao-Chen Sun,et al.  Advances and prospects of rare earth metal-organic frameworks in catalytic applications , 2020 .

[19]  Jun Chen,et al.  Heterogeneous Single‐Atom Catalysts for Electrochemical CO2 Reduction Reaction , 2020, Advanced materials.

[20]  M. Dupuis,et al.  Carbon nitride embedded with transition metals for selective electrocatalytic CO2 reduction , 2020 .

[21]  E. J. Anthony,et al.  Recent advances in carbon dioxide utilization , 2020, Renewable and Sustainable Energy Reviews.

[22]  Zhiyi Lu,et al.  Ammonia Thermal Treatment toward Topological Defects in Porous Carbon for Enhanced Carbon Dioxide Electroreduction , 2020, Advanced materials.

[23]  R. S. Dey,et al.  Unravelling the Role of Fe-Mn Binary Active Sites Electrocatalyst for Efficient Oxygen Reduction Reaction and Rechargeable Zn-Air Batteries. , 2020, Inorganic chemistry.

[24]  M. Swihart,et al.  Achievements, challenges and perspectives on cathode catalysts in proton exchange membrane fuel cells for transportation , 2019, Nature Catalysis.

[25]  L. Wan,et al.  Cascade anchoring strategy for general mass production of high-loading single-atomic metal-nitrogen catalysts , 2019, Nature Communications.

[26]  C. Shi,et al.  Bio-inspired three-dimensional carbon network with enhanced mass-transfer ability for supercapacitors , 2019, Carbon.

[27]  Yuyan Shao,et al.  PGM‐Free Cathode Catalysts for PEM Fuel Cells: A Mini‐Review on Stability Challenges , 2019, Advanced materials.

[28]  Wei Chen,et al.  Lattice distortion in a strong and ductile refractory high-entropy alloy , 2018, Acta Materialia.

[29]  Sean C. Smith,et al.  Electroreduction of CO2 to CO on a Mesoporous Carbon Catalyst with Progressively Removed Nitrogen Moieties , 2018, ACS Energy Letters.

[30]  J. Musil,et al.  Hydrophobicity of Thin Films of Compounds of Low‐Electronegativity Metals , 2014 .

[31]  Hao Gong,et al.  Exploration of the active center structure of nitrogen-doped graphene-based catalysts for oxygen reduction reaction , 2012 .