Measured properties of turbulent premixed flames for model assessment, including burning velocities, stretch rates, and surface densities

Abstract Several previously unreported properties of turbulent premixed flames were measured because they are especially useful for the future assessment of direct numerical simulations and models. These new properties include local stretch rates, a wrinkling parameter, the degree of flamelet extinction, and the reaction layer thickness, which were quantified using simultaneous CH planar laser-induced fluorescence/particle image velocimetry (CH PLIF-PIV) diagnostics. Other reported properties that are useful for model assessment are flame surface density ( Σ ) and global consumption speed, which is one type of turbulent burning velocity. Also measured was the Meneveau–Poinsot stretch efficiency function ( Γ K ) , which plays a central role in the coherent flamelet model. Some images of the flame–eddy interactions show how eddies exert strain and how flamelets “merge.” A highly wrinkled (corrugated) flame with well-defined boundary conditions was stabilized on a large two-dimensional slot Bunsen burner. It was found that the turbulent burning velocity of Bunsen flames depends on the mean velocity U ¯ , which was varied independently of turbulence intensity. It is concluded that conventional relations for the turbulent burning velocity of Bunsen flames are inadequate because they should include two additional parameters: mean velocity U ¯ and burner width W . These parameters affect the residence times of the flame–eddy interactions. A scaling analysis is presented to explain the observed trends. It indicates that if the burner width is sufficiently large, the long flame will experience significant flamelet merging, which is one factor leading to the “bending” (nonlinear behavior) of the burning velocity curve. Images of CH layers show that flame surface area is lost by flamelet merging, but is not lost due to local extinction, as no extinction was observed. The stretch efficiency function increases with increasing integral scale, indicating that large eddies are more efficient in exerting flame stretch than small eddies.

[1]  I. Shepherd,et al.  Flame front geometry in premixed turbulent flames , 1991 .

[2]  Joseph F. Grcar,et al.  Numerical simulation of premixed turbulent methane combustion , 2002 .

[3]  Amable Liñán,et al.  The virtual origin as a first-order correction for the far-field description of laminar jets , 2002 .

[4]  J. Driscoll,et al.  Turbulent Premixed Hydrogen/Air Flames at High Reynolds Numbers , 1990 .

[5]  C. Law,et al.  Propagation and extinction of stretched premixed flames , 1988 .

[6]  J. Wyngaard.  Spatial Resolution of a Resistance Wire Temperature Sensor , 1971 .

[7]  Charles J. Mueller,et al.  Vorticity generation and attenuation as vortices convect through a premixed flame , 1998 .

[8]  K. Peng,et al.  High-intensity turbulent premixed combustion: General correlations of turbulent burning velocities in a new cruciform burner , 2000 .

[9]  Derek Bradley,et al.  Turbulent burning velocities: a general correlation in terms of straining rates , 1987, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[10]  C. Sung,et al.  Thermophoretic Effects on Seeding Particles in LDV Measurements of Flames , 1994 .

[11]  Habib N. Najm,et al.  Premixed flame response to unsteady strain-rate and curvature , 1996 .

[12]  Thierry Poinsot,et al.  Flame Stretch and the Balance Equation for the Flame Area , 1990 .

[13]  Campbell D. Carter,et al.  Propagation speeds and stretch rates measured along wrinkled flames to assess the theory of flame stretch , 2003 .

[14]  Jay P. Gore,et al.  An evaluation of flame surface density models for turbulent premixed jet flames , 1999 .

[15]  K. Bray,et al.  Studies of the turbulent burning velocity , 1990, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[16]  Robert K. Cheng,et al.  The burning rate of premixed flames in moderate and intense turbulence , 2001 .

[17]  Thierry Poinsot,et al.  A comparison of flamelet models for premixed turbulent combustion , 1993 .

[18]  Markus Raffel,et al.  Particle Image Velocimetry: A Practical Guide , 2002 .

[19]  The propagation of wrinkled premixed flames in spatially periodic shear flow , 1992 .

[20]  Andrew G. Glen,et al.  APPL , 2001 .

[21]  Yoshikazu Ito,et al.  Local flame structure in the well-stirred reactor regime , 2002 .

[22]  Chaouki Ghenai,et al.  Mass flux measurements for burning rate determination of premixed turbulent flames , 1998 .

[23]  G. Sivashinsky,et al.  Flame extinction by periodic flow field , 1991 .

[24]  D. Veynante,et al.  Experimental analysis of flamelet models for premixed turbulent combustion , 1994 .

[25]  Reaction zone structure of non-premixed turbulent flames in the “intensely wrinkled” regime , 2000 .

[26]  Rs Cant,et al.  Some applications of Kolmogorov’s turbulence research in the field of combustion , 1991, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[27]  C. Carter,et al.  Strain rates measured along the wrinkled flame contour within turbulent non-premixed jet flames , 2001 .

[28]  R. Blint,et al.  Atmospheric pressure premixed hydrocarbon-air flames: Theory and experiment , 1981 .

[29]  T. Baritaud,et al.  Modeling turbulent combustion and pollutant formation in stratified charge SI engines , 1996 .

[30]  I. G. Shepherd,et al.  Premixed flame front structure in intense turbulence , 2002 .

[31]  Mohamed I. Hassan,et al.  Measured and predicted properties of laminar premixed methane/air flames at various pressures , 1998 .

[32]  RS Cant,et al.  Implications of a flame surface density approach to large eddy simulation of premixed turbulent combustion , 2001 .

[33]  Possible role of temporal correlations in the bending of turbulent flame velocity , 1999 .

[34]  F. Gouldin,et al.  Measurements of flamelet orientations in premixed flames with positive and negative Markstein numbers , 2000 .

[35]  T. Ng,et al.  On defining the turbulent burning velocity in premixed V-shaped turbulent flames , 1984 .

[36]  Charles Meneveau,et al.  A priori testing of a similarity model for large eddysimulations of turbulent premixed combustion , 2002 .

[37]  C. Meneveau,et al.  A power-law flame wrinkling model for LES of premixed turbulent combustion Part I: non-dynamic formulation and initial tests , 2002 .

[38]  C. Carter,et al.  Simultaneous CH planar laser-induced fluorescence and particle imaging velocimetry in turbulent nonpremixed flames , 1998 .

[39]  D. Bradley.  How fast can we burn , 1992 .

[40]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[41]  Friedrich Dinkelacker,et al.  Structure of locally quenched highly turbulent lean premixed Flames , 1998 .

[42]  N. Peters.  The turbulent burning velocity for large-scale and small-scale turbulence , 1999, Journal of Fluid Mechanics.

[43]  Thierry Poinsot,et al.  Stretching and quenching of flamelets in premixed turbulent combustion , 1991 .

[44]  L. Kostiuk,et al.  Experimentally measured burning rates of premixed turbulent flames , 1996 .

[45]  Jacqueline H. Chen,et al.  The mechanism of two-dimensional pocket formation in lean premixed methane-air flames with implications to turbulent combustion , 1999 .

[46]  Andrei Lipatnikov,et al.  A test of an engineering model of premixed turbulent combustion , 1996 .

[47]  R. Cheng,et al.  The influence of burner geometry on premixed turbulent flame propagation , 1991 .

[48]  A. D. Gosman,et al.  Application of a flame-wrinkling les combustion model to a turbulent mixing layer , 1998 .