Bulk composition and microstructure dependence of effective thermal conductivity of porous inorganic polymer cements

Experimental results and theoretical models are used to assess the effective thermal conductivity of porous inorganic polymer cements, often indicated as geopolymers, with porosity between 30 and 70. vol.%. It is shown that the bulk chemical composition affects the microstructure (grains size, pores size, spatial arrangement of pores, homogeneity, micro cracks, bleeding channels) with consequently the heat flow behaviour through the porous matrix. In particular, introduction of controlled fine pores in a homogeneous matrix of inorganic polymer cements results in an increase of pore volume and improvement of the thermal insulation. The variation of the effective thermal conductivity with the total porosity was found to be consistent with analytical models described by Maxwell-Eucken and Landauer.

[1]  James G. Berryman,et al.  Thermal conductivity of porous media , 2004 .

[2]  Grant C. Lukey,et al.  Thermal Conductivity of Metakaolin Geopolymers Used as a First Approximation for Determining Gel Interconnectivity , 2006 .

[3]  S. Shtrikman,et al.  A Variational Approach to the Theory of the Effective Magnetic Permeability of Multiphase Materials , 1962 .

[4]  W. O. Smith.  THE THERMAL CONDUCTIVITY OF DRY SOIL , 1942 .

[5]  A. Sellitto,et al.  Pore-size dependence of the thermal conductivity of porous silicon: A phonon hydrodynamic approach , 2010 .

[6]  P. G. Collishaw,et al.  An assessment of expressions for the apparent thermal conductivity of cellular materials , 1994, Journal of Materials Science.

[7]  S. Kirkpatrick.  Percolation and Conduction , 1973 .

[8]  B. Nait‐Ali,et al.  Thermal conductivity of highly porous zirconia , 2006 .

[9]  J. Kaufmann.  Characterization of Pore Space of Cement‐Based Materials by Combined Mercury and Wood's Metal Intrusion , 2009 .

[10]  Rolf Landauer,et al.  The Electrical Resistance of Binary Metallic Mixtures , 1952 .

[11]  C. Gallé,et al.  Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: A comparative study between oven-, vacuum-, and freeze-drying , 2001 .

[12]  J. Hammersley,et al.  Percolation processes , 1957, Mathematical Proceedings of the Cambridge Philosophical Society.

[13]  Laurent Pilon,et al.  Scaling laws for thermal conductivity of crystalline nanoporous silicon based on molecular dynamics simulations , 2011, Journal of Applied Physics.

[14]  J. Lannutti,et al.  X‐ray Computed Tomography and Mercury Porosimetry for Evaluation of Density Evolution and Porosity Distribution , 2004 .

[15]  M. Christon,et al.  Quasi-steady temperature gradient metamorphism in idealized, dry snow , 1994 .

[16]  Sidney Diamond,et al.  Mercury porosimetry: An inappropriate method for the measurement of pore size distributions in cement-based materials , 2000 .

[17]  Waltraud M. Kriven,et al.  The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers , 2007 .

[18]  Katrin Rübner,et al.  Characterization of Mineral Building Materials by Mercury‐Intrusion Porosimetry , 2006 .

[19]  J. Deventer,et al.  Understanding the relationship between geopolymer composition, microstructure and mechanical properties , 2005 .

[20]  Brian H. O'Connor,et al.  Chemical optimisation of the compressive strength of aluminosilicate geopolymers synthesised by sodium silicate activation of metakaolinite , 2003 .

[21]  M. Harmer,et al.  Effect of Pore Distribution on Microstructure Development: I, Matrix Pores , 1988 .

[22]  John L. Provis,et al.  Spatial distribution of pores in fly ash-based inorganic polymer gels visualised by Wood’s metal intrusion , 2009 .

[23]  J. Davidovits.  Geopolymer chemistry and applications , 2008 .

[24]  Donald J. Cleland,et al.  A new approach to modelling the effective thermal conductivity of heterogeneous materials , 2006 .

[25]  J. Maxwell.  A Treatise on Electricity and Magnetism , 1873, Nature.

[26]  W. Woodside,et al.  Thermal Conductivity of Porous Media. I. Unconsolidated Sands , 1961 .

[27]  Gang Chen,et al.  Thermal conductivity of periodic microporous silicon films , 2004 .

[28]  John L. Provis,et al.  Microscopy and microanalysis of inorganic polymer cements. 2: the gel binder , 2009, Journal of Materials Science.

[29]  Waltraud M. Kriven,et al.  Microstructure and microchemistry of fully-reacted geopolymers and geopolymer matrix composites , 2012 .

[30]  B. Schulz,et al.  Thermal conductivity of porous and highly porous materials , 1982 .

[31]  S. Rigby,et al.  Interfacing Mercury Porosimetry with Nitrogen Sorption , 2004 .

[32]  K. Sagoe-Crentsil,et al.  Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: Part II. High Si/Al ratio systems , 2007 .