Effect of clay dispersion on the cell structure of LDPE/clay nanocomposite foams

In this study, the effect of clay and its dispersion state on the cell morphology and foaming behavior of chemically crosslinked polyethylene (PE) foams were examined. In addition, the effect of foaming process on the clay morphology was also considered. It was shown that the morphology of the clay before the foaming process and its compatibility with PE matrix play a major role in determining the final foam properties. A PE-g-MA compatibilizer was used to increase the melt intercalation of PE onto the clay galleries and to improve clay dispersion in the PE matrix. The uniform dispersion of clay provided greater and well- dispersed nucleation sites. This led to smaller cell size, narrower cell size distribution, and higher cell density, and lower foam density. During the foaming process, intercalated clays were delaminated due to the rapid polymer melt expansion that inhibited gas release and increased foam expansion ratio. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers

[1]  A. Babaluo,et al.  Rheology, morphology, and thermal behavior of HDPE/clay nanocomposites , 2010 .

[2]  A. Arefazar,et al.  Study on dispersion and intercalation of organoclay in PP and PP-g-MA matrices , 2009 .

[3]  J. Yeh,et al.  Effect of clay and compatibilizer on the mechanical/thermal properties of microcellular injection molded low density polyethylene nanocomposites☆ , 2009 .

[4]  A. Arefazar,et al.  Multi-scale analysis of polypropylene based organoclay containing composites, Part 1: Morphology , 2009 .

[5]  S. Horsch,et al.  Supercritical Carbon Dioxide-Processed Dispersed Polystyrene−Clay Nanocomposites , 2008 .

[6]  J. Yu,et al.  Foaming behavior of polypropylene/polystyrene blends enhanced by improved interfacial compatibility , 2008 .

[7]  Chul B. Park,et al.  Effect of Processing Parameters on the Mechanical Properties of Injection Molded Thermoplastic Polyolefin (TPO) Cellular Foams , 2008 .

[8]  J. L. Ruiz-Herrero,et al.  The Effect of Processing on the Structure and Properties of Crosslinked Closed Cell Polyethylene Foams , 2008 .

[9]  Hanxiong Huang,et al.  Improving of Cell Structure of Microcellular Foams Based on Polypropylene/High-density Polyethylene Blends , 2008 .

[10]  Hanxiong Huang,et al.  Improving polypropylene microcellular foaming through blending and the addition of nano-calcium carbonate , 2007 .

[11]  Chul B. Park,et al.  Effects of nanoparticles on the density reduction and cell morphology of extruded metallocene polyethylene/wood fiber nanocomposites , 2007 .

[12]  J. Saja,et al.  Foaming behaviour and cellular structure of LDPE/hectorite nanocomposites , 2007 .

[13]  Chul B. Park,et al.  Effects of clay dispersion on the foam morphology of LDPE/clay nanocomposites , 2007 .

[14]  Chul B. Park,et al.  Effect of processing parameters on the cellular morphology and mechanical properties of thermoplastic polyolefin (TPO) microcellular foams , 2007 .

[15]  Dong-Woo Kim,et al.  Effect of compatibilizer and silane coupling agent on physical properties of ethylene vinyl acetate copolymer/ethylene-1-butene copolymer/clay nanocomposite foams , 2006 .

[16]  J. Yu,et al.  Heterogeneous nucleation uniformizing cell size distribution in microcellular nanocomposites foams , 2006 .

[17]  U. Sundararaj,et al.  Thermal, Rheological, and Mechanical Behaviors of LLDPE/PEMA/Clay Nanocomposites: Effect of Interaction Between Polymer, Compatibilizer, and Nanofiller , 2006 .

[18]  Chul B. Park,et al.  The Effects of Nano-clay on Extrusion Microcellular Foaming of Nylon , 2005 .

[19]  Keun-byoung Yoon,et al.  Polyethylene/MMT nanocomposites prepared by in situ polymerization using supported catalyst systems , 2005 .

[20]  M. Okamoto,et al.  Visual observation of CO2 foaming of polypropylene‐clay nanocomposites , 2004 .

[21]  L. Turng,et al.  Effects of nano-fillers and process conditions on the microstructure and mechanical properties of microcellular injection molded polyamide nanocomposites , 2003 .

[22]  Denis Rodrigue,et al.  High density polyethylene foams. II. Elastic modulus , 2003 .

[23]  D. Tomasko,et al.  Polymer–Clay Nanocomposite Foams Prepared Using Carbon Dioxide , 2003 .

[24]  L. J. Lee,et al.  Extrusion of polystyrene nanocomposite foams with supercritical CO2 , 2003 .

[25]  S. Ray,et al.  Well-controlled biodegradable nanocomposite foams: From microcellular to nanocellular , 2003 .

[26]  T. Kotaka,et al.  Foam processing and cellular structure of polypropylene/clay nanocomposites , 2002 .

[27]  Richard A. Vaia,et al.  Polymer nanocomposites : synthesis, characterization, and modeling , 2001 .

[28]  T. Kotaka,et al.  Biaxial Flow-Induced Alignment of Silicate Layers in Polypropylene/Clay Nanocomposite Foam , 2001 .

[29]  Lee Chen,et al.  Gas absorption with filled polymer systems , 2001 .

[30]  M. Yamaguchi,et al.  Study on the foaming of crosslinked polyethylene , 2001 .

[31]  N. J. Mills,et al.  Experiments and modelling of the expansion of crosslinked polyethylene foams , 1998 .

[32]  N. Sombatsompop.  EFFECTS OF CROSSLINK CHARACTERISTICS ON DENSITY AND SWELLING BEHAVIOUR OF EXPANDED NATURAL RUBBER VULCANISATES , 1998 .

[33]  Chen Wenxiu,et al.  Investigation of radiation-crosslinked foam of LDPE/EVA blends , 1996 .

[34]  G. Campbell,et al.  The heterogeneous nucleation of microcellular foams assisted by the survival of microvoids in polymers containing low glass transition particles. Part I: Mathematical modeling and numerical simulation , 1994 .

[35]  G. Campbell,et al.  The heterogeneous nucleation of microcellular foams assisted by the survival of microvoids in polymers containing low glass transition particles. Part II: Experimental results and discussion , 1994 .

[36]  N. Suh,et al.  A process for making microcellular thermoplastic parts , 1990 .

[37]  M. B. Rhodes,et al.  Foam characterization and quantitative stereology , 1986 .