Finite strain response of crimped fibers under uniaxial traction: An analytical approach applied to collagen

Abstract Composite materials reinforced by crimped fibers intervene in a number of advanced structural applications. Accordingly, constitutive equations describing their anisotropic behavior and explicitly accounting for fiber properties are needed for modeling and design purposes. To this aim, the finite strain response of crimped beams under uniaxial traction is herein addressed by obtaining analytical relationships based on the Principle of Virtual Works. The model is applied to collagen fibers in soft biological tissues, coupling geometric nonlinearities related to fiber crimp with material nonlinearities due to nanoscale mechanisms. Several numerical applications are presented, addressing the influence of geometric and material features. Available experimental data for tendons are reproduced, integrating the proposed approach within an optimization procedure for data fitting. The obtained results highlight the effectiveness of the proposed approach in correlating fibers structure with composite material mechanics.

[1]  Chen-Ming Kuo,et al.  Effect of Fiber Waviness on the Nonlinear Elastic Behavior of Flexible Composites , 1988 .

[2]  Y. Gun’ko,et al.  Recent Advances in Research on Carbon Nanotube–Polymer Composites , 2010, Advanced materials.

[3]  David J. Steigmann,et al.  Frame-Invariant Polyconvex Strain-Energy Functions for Some Anisotropic Solids , 2003 .

[4]  Markus J Buehler,et al.  Entropic elasticity controls nanomechanics of single tropocollagen molecules. , 2007, Biophysical journal.

[5]  I. Yannas,et al.  Dependence of stress-strain nonlinearity of connective tissues on the geometry of collagen fibers. , 1976, Journal of biomechanics.

[6]  Michele Marino,et al.  Multiscale Elastic Models of Collagen Bio-structures: From Cross-Linked Molecules to Soft Tissues , 2013 .

[7]  Samuel Ibekwe,et al.  A review of stimuli-responsive polymers for smart textile applications , 2012 .

[8]  Jan Feijen,et al.  Mechanical properties of native and cross-linked type I collagen fibrils. , 2008, Biophysical journal.

[9]  Deformation of a planar sinusoidal elastic beam , 1985 .

[10]  P. Wriggers,et al.  An exact conserving algorithm for nonlinear dynamics with rotational DOFs and general hyperelasticity. Part 2: shells , 2011 .

[11]  J D Humphrey,et al.  A new constitutive formulation for characterizing the mechanical behavior of soft tissues. , 1987, Biophysical journal.

[12]  G Angel,et al.  Interferometric evaluation of collagen concentration in tendon fibers. , 1985, Connective tissue research.

[13]  P. Neff,et al.  Invariant formulation of hyperelastic transverse isotropy based on polyconvex free energy functions , 2003 .

[14]  N. Ishioka,et al.  Single-column high-performance liquid chromatographic-fluorescence detection of immature, mature, and senescent cross-links of collagen. , 1997, Analytical biochemistry.

[15]  Stefan Hartmann,et al.  Polyconvexity of generalized polynomial-type hyperelastic strain energy functions for near-incompressibility , 2003 .

[16]  Michele Marino,et al.  Elasto-damage modeling of biopolymer molecules response , 2012 .

[17]  Michele Marino,et al.  Stress and strain localization in stretched collagenous tissues via a multiscale modelling approach , 2014, Computer methods in biomechanics and biomedical engineering.

[18]  E. Baer,et al.  Collagen; ultrastructure and its relation to mechanical properties as a function of ageing , 1972, Proceedings of the Royal Society of London. Series B. Biological Sciences.

[19]  Ivan Vesely,et al.  Invariant formulation for dispersed transverse isotropy in aortic heart valves , 2005, Biomechanics and modeling in mechanobiology.

[20]  C. Maganaris,et al.  Effect of strength training on human patella tendon mechanical properties of older individuals , 2003, The Journal of physiology.

[21]  Ghodrat Karami,et al.  Effective moduli and failure considerations for composites with periodic fiber waviness , 2005 .

[22]  J. Ganghoffer,et al.  Homogenisation of the undulations of a single yarn. Applications to the modelling of the traction , 2004 .

[23]  Charles A. Taylor,et al.  The three-dimensional micro- and nanostructure of the aortic medial lamellar unit measured using 3D confocal and electron microscopy imaging. , 2008, Matrix Biology.

[24]  P. Wriggers.  Nonlinear Finite Element Methods , 2008 .

[25]  A. Ragab,et al.  Engineering Solid Mechanics: Fundamentals and Applications , 1998 .

[26]  A. Ibrahimbegovic.  On finite element implementation of geometrically nonlinear Reissner's beam theory: three-dimensional curved beam elements , 1995 .

[27]  Michele Marino,et al.  Age-Dependent Arterial Mechanics via a Multiscale Elastic Approach , 2013 .

[28]  P. Purslow,et al.  Ageing changes in the tensile properties of tendons: influence of collagen fibril volume fraction. , 2008, Journal of biomechanical engineering.

[29]  J. Weiss,et al.  Recruitment of tendon crimp with applied tensile strain. , 2002, Journal of biomechanical engineering.

[30]  P. Boisse,et al.  Experimental analysis and modeling of biaxial mechanical behavior of woven composite reinforcements , 2001 .

[31]  Daniele Bianchi,et al.  An integrated computational approach for aortic mechanics including geometric, histological and chemico-physical data. , 2016, Journal of biomechanics.

[32]  Michele Marino,et al.  Computational modeling of soft tissues and ligaments , 2014 .

[33]  Tarek I. Zohdi,et al.  A numerical method for homogenization in non-linear elasticity , 2007 .

[34]  Tsu-Wei Chou,et al.  Review. Flexible composites , 1989 .

[35]  Isaac M Daniel,et al.  Elastic properties of composites with fiber waviness , 1996 .

[36]  Christophe Binetruy,et al.  Corrugated beams mechanical behavior modeling by the homogenization method , 2013 .

[37]  E. Reissner.  On one-dimensional finite-strain beam theory: The plane problem , 1972 .

[38]  Giuseppe Vairo,et al.  Beams Comprising Unilateral Material in Frictionless Contact: A Variational Approach with Constraints in Dual Spaces , 2013 .

[39]  Michael S Sacks,et al.  On the presence of affine fibril and fiber kinematics in the mitral valve anterior leaflet. , 2015, Biophysical journal.

[40]  Michele Marino,et al.  Equivalent Stiffness and Compliance of Curvilinear Elastic Fibers , 2012 .

[41]  J. Trotter,et al.  STEM/TEM studies of collagen fibril assembly. , 2001, Micron.

[42]  Peter Wriggers,et al.  On the computation of the macroscopic tangent for multiscale volumetric homogenization problems , 2008 .

[43]  R. Ogden,et al.  A New Constitutive Framework for Arterial Wall Mechanics and a Comparative Study of Material Models , 2000 .

[44]  S. Ramakrishna,et al.  Biomedical applications of polymer-composite materials: a review , 2001 .

[45]  M. J. Moore,et al.  A quantitative ultrastructural study of rat tendon from birth to maturity. , 1987, Journal of anatomy.

[46]  Michele Marino,et al.  Molecular and intermolecular effects in collagen fibril mechanics: a multiscale analytical model compared with atomistic and experimental studies , 2016, Biomechanics and modeling in mechanobiology.

[47]  P. Raveendranath,et al.  A three‐noded shear‐flexible curved beam element based on coupled displacement field interpolations , 2001 .

[48]  Patrice Cartraud,et al.  Computational homogenization of periodic beam-like structures , 2006 .

[49]  F. Maceri,et al.  Anisotropic thin-walled beam models: A rational deduction from three-dimensional elasticity , 2009 .

[50]  S.-Y. Luo,et al.  Finite Elastic Behavior of Flexible Fabric Composite Under Biaxial Loading , 1999 .

[51]  M. Järvinen,et al.  Collagen fibres of the spontaneously ruptured human tendons display decreased thickness and crimp angle , 2004, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.