Improved in vitro corrosion resistance of a NiTi alloy by high current pulsed electron beam treatment

Abstract A coarse grained NiTi alloy was subjected to high current pulsed electron beam (HCPEB) irradiation. The treatment induces superfast melting, evaporation and solidification at the top surface layer. As a result of selective evaporation of Ni, the Ti content was increased in the melted layer. The surface melted layer resolidified into a 600 nm fine grain austenite (B2) structure. A martensitic phase transformation occurred in the subsurface zone due to the high thermal stress and shock waves induced by the HCPEB treatment. This transformation was avoided in the top surface melted layer due to the grain refinement which stabilized the austenite. Corrosion performance in the simulated body fluid was effectively improved after the HCPEB treatment under evaporation mode, which could be mainly attributed to the selective evaporation effect and the reduction of precipitates in the surface layer.

[1]  C. Dong,et al.  Effect of grain orientation on the nitriding rate of a nickel base alloy studied by electron backscatter diffraction , 2003 .

[2]  H. Man,et al.  A preliminary study of TiO2 deposition on NiTi by a hydrothermal method , 2004 .

[3]  C. Dong,et al.  Surface modification of steels and magnesium alloy by high current pulsed electron beam , 2005 .

[4]  W. Crone,et al.  Corrosion and wear-corrosion behavior of NiTi modified by plasma source ion implantation. , 2003, Biomaterials.

[5]  M. Grant,et al.  Interactions of orthopaedic metals with an immortalized rat osteoblast cell line. , 1996, Biomaterials.

[6]  Z. Cui,et al.  Corrosion properties of laser surface melted NiTi shape memory alloy , 2001 .

[7]  Shih-Ching Wu,et al.  Ion release from NiTi orthodontic wires in artificial saliva with various acidities. , 2003, Biomaterials.

[8]  J. V. van Horn,et al.  Electrochemical and surface characterization of a nickel-titanium alloy. , 1998, Biomaterials.

[9]  G. Eklund.  Initiation of Pitting at Sulfide Inclusions in Stainless Steel , 1974 .

[10]  A. Cigada,et al.  The corrosion behaviour of nickel titanium shape memory alloys , 1990 .

[11]  C. Dong,et al.  Surface treatment by high current pulsed electron beam , 2003 .

[12]  R. Buchheit,et al.  Pulsed electron-beam technology for surface modification of metallic materials , 1998 .

[13]  D. Starosvetsky,et al.  TiN coating improves the corrosion behavior of superelastic NiTi surgical alloy , 2001 .

[14]  M. Philippe,et al.  Effect of microstructure variations on the formation of deformation-induced martensite and associated tensile properties in a β metastable Ti alloy , 2000 .

[15]  Z. Cui,et al.  The corrosion and nickel release behavior of laser surface-melted NiTi shape memory alloy in Hanks, solution , 2005 .

[16]  M. Fewell,et al.  Plasma-nitrided AISI-316 stainless steel examined by scanning electron microscopy and secondary ion mass spectrometry , 1999 .

[17]  C. Dong,et al.  Temperature-stress fields and related phenomena induced by a high current pulsed electron beam , 2004 .

[18]  D. Starosvetsky,et al.  Corrosion behavior of titanium nitride coated Ni-Ti shape memory surgical alloy. , 2001, Biomaterials.

[19]  D. Starosvetsky,et al.  Corrosion behavior of heat-treated intermetallic titanium-nickel in hydrochloric acid solutions , 1998 .

[20]  Y. Rong,et al.  Nucleation barrier for phase transformations in nanosized crystals. , 2002 .

[21]  M. Jahazi,et al.  An automated method to analyze separately the microtextures of primary αp grains and the secondary αs inherited colonies in bimodal titanium alloys , 2005 .

[22]  G. Rondelli,et al.  Localized corrosion behaviour in simulated human body fluids of commercial Ni-Ti orthodontic wires. , 1999, Biomaterials.

[23]  Y. Ivanov,et al.  Physical foundations for surface treatment of materials with low energy, high current electron beams , 2000 .

[24]  X. Ren,et al.  Physical metallurgy of Ti–Ni-based shape memory alloys , 2005 .

[25]  S. Kajiwara,et al.  MARTENSITIC TRANSFORMATIONS IN ULTRA-FINE PARTICLES OF METALS AND ALLOYS , 1991 .

[26]  Buddy D. Ratner,et al.  Biomaterials Science: An Introduction to Materials in Medicine , 1996 .

[27]  N. Thadhani,et al.  Shock synthesis and characterization of nanostructured NITINOL alloy , 2004 .

[28]  C. Dong,et al.  Numerical simulation of the thermal-mechanical process of high current pulsed electron beam treatment , 2004 .

[29]  Richard J. Chater,et al.  Why stainless steel corrodes , 2002, Nature.

[30]  Philippe Bocher,et al.  Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet , 2005 .

[31]  C. Dong,et al.  Oxidation protection of AISI H13 steel by high current pulsed electron beam treatment , 2004 .

[32]  G. Cagnoli,et al.  Effects of nonlinear thermoelastic damping in highly stressed fibers , 2002 .

[33]  C. Dong,et al.  High current pulsed electron beam treatment of AZ31 Mg alloy , 2005 .

[34]  J. Planell,et al.  Relevant aspects in the clinical applications of NiTi shape memory alloys , 1996 .

[35]  Y. Zhou,et al.  Effect of grain refinement on the resistance of 304 stainless steel to breakaway oxidation in wet air , 2005 .

[36]  Uhthoff Hk.  Current concepts of internal fixation of fractures. , 1980 .