Chemical Stabilization of Municipal Solid Waste Incineration Fly Ash without Any Commercial Chemicals: First Pilot-Plant Scaling Up
暂无分享,去创建一个
Ivano Vassura | Margarida J. Quina | Laura E. Depero | Laura Borgese | Elza Bontempi | E. Bontempi | L. Depero | M. Quina | I. Vassura | L. Borgese | A. Zanoletti | M. Pasquali | L. Benassi | Alessandra Zanoletti | Rogerta Dalipi | Laura Benassi | Michela Pasquali | R. Dalipi
[1] E. Bontempi,et al. Waste silica sources as heavy metal stabilizers for municipal solid waste incineration fly ash , 2017 .
[2] V. Funari,et al. The rare earth elements in municipal solid waste incinerators ash and promising tools for their prospecting. , 2016, Journal of hazardous materials.
[3] E. Bontempi,et al. Rice Husk Ash to Stabilize Heavy Metals Contained in Municipal Solid Waste Incineration Fly Ash: First Results by Applying New Pre-treatment Technology , 2015, Materials.
[4] G. Qian,et al. Enrichment of heavy metals in fine particles of municipal solid waste incinerator (MSWI) fly ash and associated health risk. , 2015, Waste management.
[5] E. Bontempi,et al. Comparison between rice husk ash grown in different regions for stabilizing fly ash from a solid waste incinerator. , 2015, Journal of environmental management.
[6] E. Bontempi,et al. Total reflection X‐Ray fluorescence spectroscopy to study Pb and Zn accumulation in zebrafish embryos , 2015 .
[7] C. Benson,et al. Leaching characteristics of toxic constituents from coal fly ash mixed soils under the influence of pH. , 2015, Waste management.
[8] Aldo R. Boccaccini,et al. Recycling of pre-stabilized municipal waste incinerator fly ash and soda-lime glass into sintered glass-ceramics , 2015 .
[9] C. Benson,et al. Effects of pH on the leaching mechanisms of elements from fly ash mixed soils , 2015 .
[10] Mark Tyrer,et al. Stabilization of heavy metals in MSWI fly ash using silica fume. , 2014, Waste management.
[11] E. Bontempi,et al. A sustainable technology for Pb and Zn stabilization based on the use of only waste materials: A green chemistry approach to avoid chemicals and promote CO2 sequestration , 2014 .
[12] E. Bontempi,et al. Arsenic stabilization in coal fly ash through the employment of waste materials , 2014 .
[13] E. Bontempi,et al. Biosafe inertization of municipal solid waste incinerator residues by COSMOS technology. , 2014, Journal of hazardous materials.
[14] M. Modesti,et al. Structural and Mechanical Characterization of Sustainable Composites Based on Recycled and Stabilized Fly Ash , 2014, Materials.
[15] J. M. Chimenos,et al. Pilot-scale road subbase made with granular material formulated with MSWI bottom ash and stabilized APC fly ash: environmental impact assessment. , 2014, Journal of hazardous materials.
[16] Alessandra Gianoncelli,et al. Review of fly ash inertisation treatments and recycling , 2014, Environmental Chemistry Letters.
[17] J De Greef,et al. Optimising energy recovery and use of chemicals, resources and materials in modern waste-to-energy plants. , 2013, Waste management.
[18] G. Rizzo,et al. Inertisation of heavy metals in municipal solid waste incineration fly ash by means of colloidal silica – a synchrotron X-ray diffraction and absorption study , 2013 .
[19] E. Bontempi,et al. A new method to inertize incinerator toxic fly ash with silica from rice husk ash , 2013, Environmental Chemistry Letters.
[20] J. M. Chimenos,et al. Aggregate material formulated with MSWI bottom ash and APC fly ash for use as secondary building material. , 2013, Waste management.
[21] Marco Alberti,et al. Use of colloidal silica to obtain a new inert from municipal solid waste incinerator (MSWI) fly ash: first results about reuse , 2012, Clean Technologies and Environmental Policy.
[22] J. Jianguo,et al. Influence of flue gas SO2 on the toxicity of heavy metals in municipal solid waste incinerator fly ash after accelerated carbonation stabilization. , 2011, Journal of hazardous materials.
[23] Ivano Vassura,et al. The recycling of MSWI bottom ash in silicate based ceramic , 2010 .
[24] E. Bontempi,et al. A new method for municipal solid waste incinerator (MSWI) fly ash inertization, based on colloidal silica. , 2010, Journal of environmental monitoring : JEM.
[25] Christian Ekberg,et al. Removal of hazardous metals from MSW fly ash--an evaluation of ash leaching methods. , 2010, Journal of hazardous materials.
[26] Yan Zhang,et al. Assessing the Chemical Behavior of Metals in Municipal Solid Waste Incineration Fly Ash Using an Enhanced CO2 Absorption , 2009 .
[27] R. Quinta-Ferreira,et al. The influence of pH on the leaching behaviour of inorganic components from municipal solid waste APC residues. , 2009, Waste management.
[28] V. Ettler,et al. The pH-dependent leaching of inorganic contaminants from secondary lead smelter fly ash. , 2009, Journal of hazardous materials.
[29] E. Bontempi,et al. Total reflection of x-ray fluorescence (TXRF): a mature technique for environmental chemical nanoscale metrology , 2009 .
[30] S. Lo,et al. Sintering of MSWI fly ash by microwave energy. , 2009, Journal of hazardous materials.
[31] Shih-Hsien Chang,et al. Evaluation of the distribution patterns of Pb, Cu and Cd from MSWI fly ash during thermal treatment by sequential extraction procedure. , 2009, Journal of hazardous materials.
[32] Jiri Hyks,et al. Influence of test conditions on solubility controlled leaching predictions from air-pollution-control residues , 2007, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.
[33] J. Sanjayan,et al. Green house gas emissions due to concrete manufacture , 2007 .
[34] Toshinori Kojima,et al. Behavior of B, Cr, Se, As, Pb, Cd, and Mo present in waste leachates generated from combustion residues during the formation of ettringite , 2006, Environmental toxicology and chemistry.
[35] Thomas Astrup,et al. Geochemical modeling of leaching from MSWI air-pollution-control residues. , 2006, Environmental science & technology.
[36] J. Blais,et al. Removal of lead in APCR leachates from municipal solid waste incinerator using peat moss in a batch counter-current sorption process , 2005 .
[37] T. Cheng,et al. On formation of CaO-Al(2)O(3)-SiO2 glass-ceramics by vitrification of incinerator fly ash. , 2003, Chemosphere.
[38] Zhao Youcai,et al. Chemical stabilization of MSW incinerator fly ashes. , 2002, Journal of hazardous materials.
[39] A Polettini,et al. Properties of Portland cement--stabilised MSWI fly ashes. , 2001, Journal of hazardous materials.
[40] Jim Swithenbank,et al. Characterization, decontamination and health effects of fly ash from waste incinerators , 1998 .
[41] T. Taylor Eighmy,et al. An approach for estimation of contaminant release during utilization and disposal of municipal waste combustion residues , 1996 .
[42] O. Hjelmar,et al. Similarities in the leaching behaviour of trace contaminants from waste, stabilized waste, construction materials and soils , 1996 .
[43] Yan Zhang,et al. MINTEQ modeling for evaluating the leaching behavior of heavy metals in MSWI fly ash. , 2008, Journal of environmental sciences.
[44] M. Ohtsubo,et al. Leachability of municipal solid waste ashes in simulated landfill conditions. , 2007, Waste management.
[45] T. Astrup,et al. Assessment of long-term leaching from waste incineration air-pollution-control residues. , 2006, Waste management.
[46] T Sabbas,et al. Management of municipal solid waste incineration residues. , 2003, Waste management.