A framework for mapping design for additive manufacturing knowledge for industrial and product design

Abstract Design for Additive Manufacturing (DfAM) is a growing field of enquiry. Over the past few years, the scientific community has begun to explore this topic to provide a basis for supporting professional design practice. However, current knowledge is still largely fragmented, difficult to access and inconsistent in language and presentation. This paper seeks to collate and organise this dispersed but growing body of knowledge, using a single and coherent conceptual framework. The framework is based on a generic design process model and consists of five parts: Conceptual design, Embodiment design, Detail design and Process planning and Process selection. 81 articles on DfAM are mapped onto the framework to provide, for the first time, a clear summary of the state of the art across the whole design process. Nine directions for the future of DfAM research are then proposed.

[1]  Michael Joseph French,et al.  Conceptual Design for Engineers , 1985 .

[2]  J. Dixon,et al.  Engineering Design , 2019, Springer Handbook of Mechanical Engineering.

[3]  David G. Ullman,et al.  The Mechanical Design Process , 1992 .

[4]  David Cebon,et al.  Materials Selection in Mechanical Design , 1992 .

[5]  David P. Cadogan,et al.  Aircrew helmet design and manufacturing enhancements through the use of advanced technologies , 1994 .

[6]  Nigel Cross,et al.  Engineering Design Methods: Strategies for Product Design , 1994 .

[7]  John S. Gero,et al.  Design and other types of fixation , 1996 .

[8]  J. William Helton,et al.  An introduction to design , 1998 .

[9]  Robert Brown,et al.  Development of a rapid prototyping design advice system , 1999, J. Intell. Manuf..

[10]  G. Goldschmidt,et al.  Reasoning by Visual Analogy in Design Problem-Solving: The Role of Guidance , 2000 .

[11]  Venkataraman Ramesh,et al.  Research in software engineering: an analysis of the literature , 2002, Inf. Softw. Technol..

[12]  Peter Scallan.  Process Planning: The Design/Manufacture Interface , 2003 .

[13]  Peter Scallan.  2 – What is process planning? , 2003 .

[14]  Philip Dickens,et al.  Implications on design of rapid manufacturing , 2003 .

[15]  Saeed Mansour,et al.  Design opportunities with rapid manufacturing , 2003 .

[16]  R. Hague *,et al.  Material and design considerations for rapid manufacturing , 2004 .

[17]  H. S. Byun,et al.  A decision support system for the selection of a rapid prototyping process using the modified TOPSIS method , 2005 .

[18]  Gabriela Goldschmidt,et al.  Variances in the impact of visual stimuli on design problem solving performance , 2006 .

[19]  Pearl Brereton,et al.  Performing systematic literature reviews in software engineering , 2006, ICSE.

[20]  Jian S. Dai,et al.  Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference , 2006 .

[21]  D. Rosen.  Design for Additive Manufacturing: A Method to Explore Unexplored Regions of the Design Space , 2007 .

[22]  Stefano Filippi,et al.  The Design Guidelines (DGLs), a knowledge-based system for industrial design developed accordingly to ISO-GPS (Geometrical Product Specifications) concepts , 2007 .

[23]  Gi Dae Kim,et al.  A benchmark study on rapid prototyping processes and machines: Quantitative comparisons of mechanical properties, accuracy, roughness, speed, and material cost , 2008 .

[24]  Antonio Armillotta,et al.  Selection of layered manufacturing techniques by an adaptive AHP decision model , 2008 .

[25]  Fumihiko Kimura,et al.  Design methodologies: Industrial and educational applications , 2009 .

[26]  Daniel Thomas.  The development of design rules for selective laser melting , 2009 .

[27]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[28]  Linda C. Schmidt,et al.  Examining Potential Design Guidelines for Use in Fused Deposition Modeling to Reduce Build Time and Material Volume , 2009 .

[29]  Caterina Rizzi,et al.  A new design frame work for lower limb prosthesis , 2010 .

[30]  Eleonora Atzeni,et al.  Redesign and cost estimation of rapid manufactured plastic parts , 2010 .

[31]  Allan Rennie,et al.  Computer aided material selection for additive manufacturing materials , 2010 .

[32]  Joaquim Lloveras,et al.  Development of an AI-based Rapid Manufacturing Advice System , 2010 .

[33]  Ian Gibson,et al.  Design rules for additive manufacture , 2010 .

[34]  Hugo Rodrigue,et al.  An Assembly-Level Design for Additive Manufacturing Methodology , 2010 .

[35]  Gabriela Goldschmidt,et al.  Inspiring design ideas with texts , 2011 .

[36]  Jean-Yves Hascoët,et al.  A new DFM approach to combine machining and additive manufacturing , 2011, ArXiv.

[37]  Jouke Verlinden,et al.  Optimal Design for Additive Manufacturing: Opportunities and Challenges , 2011 .

[38]  Stefan Junk,et al.  DESIGN FOR ADDITIVE MANUFACTURING TECHNOLOGIES: NEW APPLICATIONS OF 3D-PRINTING FOR RAPID PROTOTYPING AND RAPID TOOLING , 2011 .

[39]  Michael F. Ashby,et al.  Chapter 11 – Designing Hybrid Materials , 2011 .

[40]  Eujin Pei,et al.  Development of a design feature database to support design for additive manufacturing , 2012 .

[41]  Frédéric Vignat,et al.  Designing for Additive Manufacturing , 2012 .

[42]  Carolyn Conner Seepersad,et al.  A designer's guide for dimensioning and tolerancing SLS parts , 2012 .

[43]  R. Ponche,et al.  A new global approach to design for additive manufacturing , 2012 .

[44]  Claes Wohlin,et al.  Systematic literature studies: Database searches vs. backward snowballing , 2012, Proceedings of the 2012 ACM-IEEE International Symposium on Empirical Software Engineering and Measurement.

[45]  Richard M. Everson,et al.  A new approach to the design and optimisation of support structures in additive manufacturing , 2013 .

[46]  Mohsen Badrossamay,et al.  Topology Optimization for Fused Deposition Modeling Process , 2013 .

[47]  Simon Richir,et al.  A design methodology for parts using additive manufacturing , 2013 .

[48]  Christopher B. Williams,et al.  Design and assessment of an AM vending machine for student use , 2013 .

[49]  Alain Bernard,et al.  Using AM feature and multi-attribute decision making to orientate part in Additive Manufacturing , 2013 .

[50]  W. D. Li,et al.  An adaptive process planning approach of rapid prototyping and manufacturing , 2013 .

[51]  Hugo I. Medellín-Castillo,et al.  Design for Rapid Prototyping, Manufacturing and Tooling: Guidelines , 2014 .

[52]  Guha Manogharan,et al.  Making sense of 3-D printing: Creating a map of additive manufacturing products and services , 2014 .

[53]  Alain Bernard,et al.  A new decision support method for the selection of RP process: knowledge value measuring , 2014, Int. J. Comput. Integr. Manuf..

[54]  S. Vinodh,et al.  Application of Fuzzy VIKOR for selection of rapid prototyping technologies in an agile environment , 2014 .

[55]  Yaoyao Fiona Zhao,et al.  Simulation and optimization framework for additive manufacturing processes , 2014, Proceedings of the 2014 International Conference on Innovative Design and Manufacturing (ICIDM).

[56]  Esa Hietikko.  Design for Additive Manufacturing - DFAM , 2014 .

[57]  D. Rosen,et al.  DESIGN OF TRUSS-LIKE CELLULAR STRUCTURES USING DENSITY INFORMATION FROM TOPOLOGY OPTIMIZATION , 2014 .

[58]  Matthew T Samperi.  Development of Design Guidelines for Metal Additive Manufacturing and Process Selection , 2014 .

[59]  Jean-Yves Hascoët,et al.  A novel methodology of design for Additive Manufacturing applied to Additive Laser Manufacturing process , 2014 .

[60]  David W. Rosen,et al.  Research supporting principles for design for additive manufacturing , 2014 .

[61]  Christoph Klahn,et al.  Design for Additive Manufacturing – Supporting the Substitution of Components in Series Products , 2014 .

[62]  Petra Badke-Schaub,et al.  What inspires designers? Preferences on inspirational approaches during idea generation , 2014 .

[63]  Guido A.O. Adam,et al.  Design for Additive Manufacturing—Element transitions and aggregated structures , 2014 .

[64]  Karen A. Thole,et al.  Build Direction Effects on Microchannel Tolerance and Surface Roughness , 2015 .

[65]  David W. Rosen,et al.  Design for Additive Manufacturing , 2015, Additive Manufacturing Technologies.

[66]  Charlie C. L. Wang,et al.  The status, challenges, and future of additive manufacturing in engineering , 2015, Comput. Aided Des..

[67]  Edward William Reutzel,et al.  (Re)Designing for Part Consolidation: Understanding the Challenges of Metal Additive Manufacturing , 2015 .

[68]  Bastian Leutenecker.  Indicators and Design Strategies for Direct Part Production by Additive Manufacturing , 2015 .

[69]  Miguel Fernandez-Vicente,et al.  Identifying limitations for design for manufacturing with desktop FFF 3D printers , 2015 .

[70]  Guido A.O. Adam,et al.  On design for additive manufacturing: evaluating geometrical limitations , 2015 .

[71]  Maria C. Yang,et al.  Design Principles: The Foundation of Design , 2015 .

[72]  Paul Witherell,et al.  Investigating the Role of Geometric Dimensioning and Tolerancing in Additive Manufacturing , 2015 .

[73]  Andrew T. Gaynor.  Topology Optimization Algorithms for Additive Manufacturing , 2015 .

[74]  Sam Anand,et al.  Design for Manufacturability in Additive Manufacturing Using a Graph Based Approach , 2015 .

[75]  Ruth Jill Urbanic,et al.  Fused Deposition Modeling Design Rules for Building Large, Complex Components , 2015 .

[76]  Lin Cheng,et al.  INTEGRATION OF TOPOLOGY OPTIMIZATION WITH EFFICIENT DESIGN OF ADDITIVE MANUFACTURED CELLULAR STRUCTURES , 2015 .

[77]  Jack C. Wileden,et al.  Knowledge Management With an Intelligent Tool for Additive Manufacturing , 2015 .

[78]  Nabil Anwer,et al.  Assembly Based Methods to Support Product Innovation in Design for Additive Manufacturing: An Exploratory Case Study , 2015 .

[79]  Ian Gibson,et al.  Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing , 2015 .

[80]  Dirk Herzog,et al.  Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4 , 2015 .

[81]  Yaoyao Fiona Zhao,et al.  Additive manufacturing-enabled design theory and methodology: a critical review , 2015 .

[82]  Konstantinos Salonitis,et al.  Redesign optimization for manufacturing using additive layer techniques , 2015 .

[83]  P. Witherell,et al.  DESIGN RULES WITH MODULARITY FOR ADDITIVE MANUFACTURING , 2015 .

[84]  Christoph Klahn,et al.  Design Strategies for the Process of Additive Manufacturing , 2015 .

[85]  Sang-In Park,et al.  A Multilevel Upscaling Method for Material Characterization of Additively Manufactured Part Under Uncertainties , 2015 .

[86]  Michael Schmidt,et al.  Additive manufacturing in production: challenges and opportunities , 2015, Photonics West - Lasers and Applications in Science and Engineering.

[87]  Christian Lindemann,et al.  Towards a sustainable and economic selection of part candidates for additive manufacturing , 2015 .

[88]  Claudia Eckert,et al.  Exploratory making: Shape, structure and motion , 2015 .

[89]  Linda C. Schmidt,et al.  A CALL FOR FDM DESIGN RULES TO INCLUDE ROAD DEPOSITION , 2015 .

[90]  Alireza Asadpoure,et al.  Topology optimization of lightweight periodic lattices under simultaneous compressive and shear stiffness constraints , 2015 .

[91]  Yaoyao Fiona Zhao,et al.  A new part consolidation method to embrace the design freedom of additive manufacturing , 2015 .

[92]  Konstantinos Salonitis,et al.  Design for additive manufacturing based on the axiomatic design method , 2016, The International Journal of Advanced Manufacturing Technology.

[93]  F. Martina,et al.  Design for Additive Manufacturing , 2019 .

[94]  Maria C. Yang,et al.  Design Principles: Literature Review, Analysis, and Future Directions , 2016 .

[95]  James Moultrie,et al.  A STRUCTURED LOOK AT NEW DESIGN POSSIBILITIES FOR ADDITIVE MANUFACTURING MACHINES , 2016 .

[96]  Mary Kathryn Thompson,et al.  Process chain modeling and selection in an additive manufacturing context , 2016 .

[97]  Thomas Vietor,et al.  A new methodological framework for design for additive manufacturing , 2016 .

[98]  Glaucio H. Paulino,et al.  Bridging topology optimization and additive manufacturing , 2015, Structural and Multidisciplinary Optimization.

[99]  Patrick Pradel,et al.  Complexity is not for free: the impact of component complexity on additive manufacturing build time , 2017 .

[100]  Gianluca D’Antonio,et al.  Enriching design with X through tailored additive manufacturing knowledge : a methodological proposal , 2017 .

[101]  Patrick Pradel,et al.  Economic analysis of plastic additive manufacturing for production of end use products: a preliminary study , 2017 .

[102]  Laverne Floriane,et al.  Enriching design with X through tailored additive manufacturing knowledge: a methodological proposal , 2017 .

[103]  Patrick Pradel,et al.  Exploring the Impact of Shape Complexity on Build Time for Material Extrusion and Material Jetting , 2017 .

[104]  Thomas Vietor,et al.  Methods and tools for identifying and leveraging additive manufacturing design potentials , 2018 .

[105]  Erva Ulu,et al.  Enhancing the Structural Performance of Additively Manufactured Objects , 2018, ArXiv.

[106]  T. K. Kundra,et al.  Additive Manufacturing Technologies , 2018 .

[107]  Patrick Pradel,et al.  Investigation of design for additive manufacturing in professional design practice , 2018 .