Instabilities and multiplicities in non-isothermal blown film extrusion including the effects of crystallization

[1]  R. Braatz,et al.  A thin-shell two-phase microstructural model for blown film extrusion , 2010 .

[2]  R. Braatz,et al.  Maximum-Likelihood Parameter Estimation for the Thin-Shell Quasi-Newtonian Model for a Laboratory Blown Film Extruder , 2010 .

[3]  William E. Schiesser,et al.  A Compendium of Partial Differential Equation Models: Method of Lines Analysis with Matlab , 2009 .

[4]  Dong Myeong Shin,et al.  Multiplicity, bifurcation, stability and hysteresis in dynamic solutions of film blowing process , 2007 .

[5]  L. Henrichsen,et al.  Analysis of Film Blowing with Flow-enhanced Crystallization , 2007 .

[6]  L. Henrichsen,et al.  Analysis of Film Blowing with Flow-enhanced Crystallization , 2007 .

[7]  Alastair Spence,et al.  CONVERGENCE THEORY FOR INEXACT INVERSE ITERATION APPLIED TO THE GENERALISED NONSYMMETRIC EIGENPROBLEM , 2007 .

[8]  H. Jung,et al.  Existence of optimal cooling conditions in the film blowing process , 2006 .

[9]  A. Ogale,et al.  Microstructure and kinematic aspects of blown film extrusion process: II. Numerical modelling and prediction of LLDPE and LDPE , 2004 .

[10]  H. Jung,et al.  Transient solutions of the dynamics in film blowing processes , 2004 .

[11]  Richard D. Braatz,et al.  Comparison of the Dynamic Thin Shell and Quasi-cylindrical Models for Blown Film Extrusion , 2004 .

[12]  Yi Liu,et al.  On the use of reduced order models in bifurcation analysis of distributed parameter systems , 2004, Comput. Chem. Eng..

[13]  R. Braatz,et al.  Dynamic modeling of blown‐film extrusion , 2003 .

[14]  Tatjana Stykel,et al.  On criteria for asymptotic stability of differential-algebraic equations , 2002 .

[15]  A. Doufas,et al.  Simulation of film blowing including flow-induced crystallization , 2001 .

[16]  C. Park,et al.  Stability of a two-layer blown film coextrusion , 2000 .

[17]  Paul I. Barton,et al.  A Differentiation Index for Partial Differential-Algebraic Equations , 1999, SIAM J. Sci. Comput..

[18]  C. Park,et al.  Stability of a Blown Film Extrusion Process , 1999 .

[19]  Y. Nagano,et al.  Simulation of Blown-Film Process Taking Account of Cooling-air Effect , 1999 .

[20]  J. Vlachopoulos,et al.  The Aerodynamics of Cooling of Blown Film Bubbles , 1999 .

[21]  S. Bhattacharya,et al.  Transient elongational viscosity of LLDPE/LDPE blends and its relevance to bubble stability in the film blowing process , 1998 .

[22]  Bengt Fornberg,et al.  Classroom Note: Calculation of Weights in Finite Difference Formulas , 1998, SIAM Rev..

[23]  Chao Yang,et al.  ARPACK users' guide - solution of large-scale eigenvalue problems with implicitly restarted Arnoldi methods , 1998, Software, environments, tools.

[24]  Michael T. Heath,et al.  Scientific Computing , 2018 .

[25]  William E. Schiesser,et al.  PDE boundary conditions from minimum reduction of the PDE , 1996 .

[26]  Linda R. Petzold,et al.  Numerical solution of initial-value problems in differential-algebraic equations , 1996, Classics in applied mathematics.

[27]  D. Bogue,et al.  Tubular Film Blowing , 1995 .

[28]  W. Marquardt,et al.  Structural analysis of differential-algebraic equation systems—theory and applications , 1995 .

[29]  James Demmel,et al.  The generalized Schur decomposition of an arbitrary pencil A–λB—robust software with error bounds and applications. Part II: software and applications , 1993, TOMS.

[30]  James Demmel,et al.  The generalized Schur decomposition of an arbitrary pencil A–λB—robust software with error bounds and applications. Part I: theory and algorithms , 1993, TOMS.

[31]  T. Papanastasiou,et al.  Modeling of Non-isothermal Film Blowing with Integral Constitutive Equations , 1993 .

[32]  Chang-Won Park,et al.  Analysis of isothermal two-layer blown film coextrusion , 1992 .

[33]  William E. Schiesser,et al.  Dynamic Modeling of Transport Process Systems , 1992 .

[34]  W. Schiesser.  The Numerical Method of Lines: Integration of Partial Differential Equations , 1991 .

[35]  L. Scriven,et al.  A comparison of synthetic boundary conditions for continuous-flow systems , 1991 .

[36]  M. Denn,et al.  Multiplicities and instabilities in film blowing , 1988 .

[37]  C. Pantelides.  The consistent intialization of differential-algebraic systems , 1988 .

[38]  Ed Anderson,et al.  LAPACK Users' Guide , 1995 .

[39]  L. Petzold,et al.  Numerical methods and software for sensitivity analysis of differential-algebraic systems , 1986 .

[40]  James L White,et al.  Instability phenomena in tubular film, and melt spinning of rheologically characterized high density, low density and linear low density polyethylenes , 1986 .

[41]  Y. Yeow.  Stability of tubular film flow: a model of the film-blowing process , 1976, Journal of Fluid Mechanics.

[42]  C. Petrie.  A comparison of theoretical predictions with published experimental measurements on the blown film process , 1975 .

[43]  J. Pearson,et al.  The flow of a tubular film Part 2. Interpretation of the model and discussion of solutions , 1970, Journal of Fluid Mechanics.

[44]  J. Pearson,et al.  The flow of a tubular film. Part 1. Formal mathematical representation , 1970, Journal of Fluid Mechanics.