A DSP Based Multi-Frequency 3D Electrical Impedance Tomography System

This paper describes the design of a multi-frequency Electrical impedance tomography (EIT) system, which provides a flexible mechanism for addressing up to 48 electrodes for imaging conductivity and permittivity distributions. A waveform generator based on a digital signal processor is used to produce sinusoidal waveforms with the ability to select frequencies in the range of 0.1–125 kHz. A software based phase-sensitive demodulation technique is used to extract amplitudes and phases from the raw measurements. Signal averaging and automatic gain control are also implemented in voltage and phase measurements. System performance was validated using a Cardiff-Cole Phantom and a saline filled cylindrical tank. The signal-to-noise ratio (SNR) using saline tank was greater than 60 dB and the maximum reciprocity error less than 4% for most frequencies. The common-mode rejection ratio (CMRR) was nearly 60 dB at 50 kHz. Image reconstruction performance was assessed using data acquired through a range of frequencies. This EIT system offers image reconstruction of both conductivity and permittivity distributions in three dimensions. The imaging results are presented in time difference and frequency difference imaging.

[1]  R H Bayford,et al.  Electrical impedance tomography spectroscopy (EITS) for human head imaging. , 2003, Physiological measurement.

[2]  B. Ristic,et al.  Muscle tissue ischemia monitoring using impedance spectroscopy: quantitative results of animal studies , 1997, Proceedings of the 19th Annual International Conference of the IEEE Engineering in Medicine and Biology Society. 'Magnificent Milestones and Emerging Opportunities in Medical Engineering' (Cat. No.97CH36136).

[3]  J Rosell,et al.  Common-mode feedback in electrical impedance tomography. , 1992, Clinical physics and physiological measurement : an official journal of the Hospital Physicists' Association, Deutsche Gesellschaft fur Medizinische Physik and the European Federation of Organisations for Medical Physics.

[4]  B. Blad,et al.  Impedance spectra of tumour tissue in comparison with normal tissue; a possible clinical application for electrical impedance tomography. , 1996, Physiological measurement.

[5]  Mi Wang,et al.  A high performance online data processing EIT system , 2003 .

[6]  C Gabriel,et al.  The dielectric properties of biological tissues: I. Literature survey. , 1996, Physics in medicine and biology.

[7]  D S Holder,et al.  Current approaches to analogue instrumentation design in electrical impedance tomography , 1996, Physiological measurement.

[8]  H Griffiths,et al.  A Cole phantom for EIT. , 1995, Physiological measurement.

[9]  R Bayford,et al.  Design and calibration of a compact multi-frequency EIT system for acute stroke imaging. , 2006, Physiological measurement.

[10]  Robert C. Wolpert,et al.  A Review of the , 1985 .

[11]  A Hartov,et al.  Multifrequency electrical impedance imaging: preliminary in vivo experience in breast. , 2000, Physiological measurement.

[12]  B. Cameron Reed,et al.  Linear least‐squares fits with errors in both coordinates. II: Comments on parameter variances , 1992 .

[13]  J. Macgregor,et al.  A novel approach for EIT regularization via spatial and spectral principal component analysis , 2007, Physiological measurement.

[14]  P Bertemes-Filho,et al.  A comparison of modified Howland circuits as current generators with current mirror type circuits. , 2000, Physiological measurement.

[15]  Keith D. Paulsen,et al.  A multichannel continuously selectable multifrequency electrical impedance spectroscopy measurement system , 2000, IEEE Transactions on Biomedical Engineering.

[16]  G.J. Saulnier,et al.  ACT3: a high-speed, high-precision electrical impedance tomograph , 1991, IEEE Transactions on Biomedical Engineering.

[17]  G. Crile,et al.  THE ELECTRICAL CONDUCTIVITY OF ANIMAL TISSUES UNDER NORMAL AND PATHOLOGICAL CONDITIONS , 1922 .

[18]  R H Smallwood,et al.  Mk3.5: a modular, multi-frequency successor to the Mk3a EIS/EIT system. , 2001, Physiological measurement.

[19]  Dispersion and Absorption in Dielectrics 1 , 2022 .

[20]  B H Brown,et al.  The Sheffield data collection system. , 1987, Clinical physics and physiological measurement : an official journal of the Hospital Physicists' Association, Deutsche Gesellschaft fur Medizinische Physik and the European Federation of Organisations for Medical Physics.

[21]  David S. Holder,et al.  Electrical Impedance Tomography : Methods, History and Applications , 2004 .

[22]  K. Cole,et al.  Dispersion and Absorption in Dielectrics I. Alternating Current Characteristics , 1941 .

[23]  G. Campbell,et al.  Modifying the MRI, elastic stiffness and electrical properties of polyvinyl alcohol cryogel using irradiation , 2007 .

[24]  J Jossinet,et al.  Bioelectrical spectroscopy from multi-frequency EIT. , 1994, Physiological measurement.

[25]  B. Brown,et al.  Applied potential tomography. , 1989, Journal of the British Interplanetary Society.

[26]  H. Schwan.  Electrical properties of tissue and cell suspensions. , 1957, Advances in biological and medical physics.

[27]  R. W. Lau,et al.  The dielectric properties of biological tissues: II. Measurements in the frequency range 10 Hz to 20 GHz. , 1996, Physics in medicine and biology.

[28]  L Lue.  Aspects of an electrical impedance tomography spectroscopy (EITS) system. , 1995 .

[29]  Dr D. Jennings,et al.  Front-end architecture for a multifrequency electrical impedance tomography system , 2006, Medical and Biological Engineering and Computing.

[30]  Ryan Halter,et al.  Design and implementation of a high frequency electrical impedance tomography system. , 2004, Physiological measurement.

[31]  D. Kell,et al.  The passive electrical properties of biological systems: their significance in physiology, biophysics and biotechnology. , 1987, Physics in medicine and biology.

[32]  D. Geselowitz.  An application of electrocardiographic lead theory to impedance plethysmography. , 1971, IEEE transactions on bio-medical engineering.

[33]  Mehran Goharian,et al.  Dogleg trust-region application in electrical impedance tomography , 2007, Physiological measurement.

[34]  D S Holder,et al.  A review of errors in multi-frequency EIT instrumentation , 2007, Physiological measurement.

[35]  R H Bayford,et al.  Design and performance of the UCLH mark 1b 64 channel electrical impedance tomography (EIT) system, optimized for imaging brain function. , 2002, Physiological measurement.

[36]  K. Foster,et al.  Dielectric properties of tissues and biological materials: a critical review. , 1989, Critical reviews in biomedical engineering.

[37]  B.H. Brown,et al.  A real-time electrical impedance tomography system for clinical use-design and preliminary results , 1995, IEEE Transactions on Biomedical Engineering.

[38]  J. Rosell,et al.  Multi-frequency static imaging in electrical impedance tomography: Part 1 instrumentation requirements , 1995, Medical and Biological Engineering and Computing.

[39]  Eung Je Woo,et al.  Calibration methods for a multi-channel multi-frequency EIT system , 2007, Physiological measurement.

[40]  Qing Huo Liu,et al.  A 3D EIT system for breast cancer imaging , 2006, 3rd IEEE International Symposium on Biomedical Imaging: Nano to Macro, 2006..

[41]  Kenneth S. Cole,et al.  PERMEABILITY AND IMPERMEABILITY OF CELL MEMBRANES FOR IONS , 1940 .

[42]  B. Blad.  Clinical applications of characteristic frequency measurements: preliminaryin vivo study , 1996, Medical and Biological Engineering and Computing.