Characterization of PA12/HA composite scaffolds based on selective laser sintering.

[1]  S. Peng,et al.  Structural and Functional Adaptive Artificial Bone: Materials, Fabrications, and Properties , 2023, Advanced Functional Materials.

[2]  Junchao Li,et al.  Gradient scaffolds developed by parametric modeling with selective laser sintering , 2023, International Journal of Mechanical Sciences.

[3]  L. Settineri,et al.  Sustainability in the manufacturing of composite materials: A literature review and directions for future research , 2023, Journal of Manufacturing Processes.

[4]  P. Feng,et al.  Vertical and uniform growth of MoS2 nanosheets on GO nanosheets for efficient mechanical reinforcement in polymer scaffold , 2022, Virtual and Physical Prototyping.

[5]  S. Saber-Samandari,et al.  The correlation between osseointegration and bonding strength at the bone-implant interface: In-vivo & ex-vivo investigations on hydroxyapatite and hydroxyapatite/titanium coatings. , 2022, Journal of biomechanics.

[6]  Jingdong Ma,et al.  Mechanical and Tribological Properties of 3D Printed Polyamide 12 and SiC/PA12 Composite by Selective Laser Sintering , 2022, Polymers.

[7]  A. Sachdeva,et al.  Investigations on Mechanical Properties of Polyamide Parts Fabricated by Selective Laser Sintering Process , 2022, Journal of Materials Engineering and Performance.

[8]  Junchao Li,et al.  Design and properties of graded polyamide12/hydroxyapatite scaffolds based on primitive lattices using selective laser sintering. , 2021, Journal of the mechanical behavior of biomedical materials.

[9]  H. Park,et al.  Waterproof and Wear-Resistant Surface Treatment on Printed Parts of Polyamide 12 (PA12) by Selective Laser Sintering Using a Large Pulsed Electron Beam , 2022, International Journal of Precision Engineering and Manufacturing-Green Technology.

[10]  M. Sadighi,et al.  Fabrication of elastin additive on polymethyl methacrylate and hydroxyapatite-based bioactive bone cement , 2022, Materials Chemistry and Physics.

[11]  Junchao Li,et al.  Numerical modeling and experimental verification of the composite material of PA12/HA with parameterized random distribution in selective laser sintering , 2021, Rapid Prototyping Journal.

[12]  Jingdi Chen,et al.  Recent advances in biomedical engineering of nano-hydroxyapatite including dentistry, cancer treatment and bone repair , 2021 .

[13]  C. Shuai,et al.  In situ synthesis of hydroxyapatite nanorods on graphene oxide nanosheets and their reinforcement in biopolymer scaffold , 2021, Journal of advanced research.

[14]  Ó. Carvalho,et al.  Review on current limits and potentialities of technologies for biomedical ceramic scaffolds production. , 2020, Journal of biomedical materials research. Part B, Applied biomaterials.

[15]  C. Shuai,et al.  Accelerated degradation of HAP/PLLA bone scaffold by PGA blending facilitates bioactivity and osteoconductivity , 2020, Bioactive materials.

[16]  F. Amorim,et al.  Selective laser sintering of carbon fiber–reinforced PA12: Gaussian process modeling and stochastic optimization of process variables , 2020, The International Journal of Advanced Manufacturing Technology.

[17]  Gulden Camci-Unal,et al.  Hydroxyapatite-Incorporated Composite Gels Improve Mechanical Properties and Bioactivity of Bone Scaffolds. , 2020, Macromolecular bioscience.

[18]  Yinghong Chen,et al.  Solid‐state shear milling method to prepare PA12/boron nitride thermal conductive composite powders and their selective laser sintering 3D‐printing , 2020 .

[19]  C. Shuai,et al.  Molybdenum disulfide nanosheets embedded with nanodiamond particles: co-dispersion nanostructures as reinforcements for polymer scaffolds , 2019 .

[20]  Jui-Sheng Sun,et al.  Biomimetic Synthesis of Nanocrystalline Hydroxyapatite Composites: Therapeutic Potential and Effects on Bone Regeneration , 2019, International journal of molecular sciences.

[21]  Lan Li,et al.  Trabecular-like Ti-6Al-4V scaffolds for orthopedic: fabrication by selective laser melting and in vitro biocompatibility , 2019, Journal of Materials Science & Technology.

[22]  H. Zreiqat,et al.  Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone , 2018, Advanced healthcare materials.

[23]  Afra Hadjizadeh,et al.  Chitosan-gelatin porous scaffold incorporated with Chitosan nanoparticles for growth factor delivery in tissue engineering. , 2018, Carbohydrate polymers.

[24]  R. Gandhinathan,et al.  Optimization of the configuration of porous bone scaffolds made of Polyamide/Hydroxyapatite composites using Selective Laser Sintering for tissue engineering applications. , 2018, Bio-medical materials and engineering.

[25]  C. Shuai,et al.  A graphene oxide-Ag co-dispersing nanosystem: Dual synergistic effects on antibacterial activities and mechanical properties of polymer scaffolds , 2018, Chemical Engineering Journal.

[26]  S. Ahadian,et al.  Impact of Nanophase Hydroxyapatite-Based Biomaterials on Tissue Engineering , 2018, Journal of Bionanoscience.

[27]  Zhongwei Li,et al.  Flow behavior of powder particles in layering process of selective laser melting: Numerical modeling and experimental verification based on discrete element method , 2017 .

[28]  Liu Hongbo,et al.  Surface modification of carbon fibers and the selective laser sintering of modified carbon fiber/nylon 12 composite powder , 2017 .

[29]  Xin Wang,et al.  3D printing of polymer matrix composites: A review and prospective , 2017 .

[30]  Carl Diver,et al.  Enhancing the Hydrophilicity and Cell Attachment of 3D Printed PCL/Graphene Scaffolds for Bone Tissue Engineering , 2016, Materials.

[31]  R. Gandhinathan,et al.  Design, analysis and fabrication of polyamide/ hydroxyapatite porous structured scaffold using selective laser sintering method for bio-medical applications , 2016 .

[32]  Rui Yang,et al.  Electron Beam Melted Beta-type Ti-24Nb-4Zr-8Sn Porous Structures With High Strength-to-Modulus Ratio , 2016 .

[33]  Mukesh Doble,et al.  Design of biocomposite materials for bone tissue regeneration. , 2015, Materials science & engineering. C, Materials for biological applications.

[34]  Jun Hu,et al.  Poly(glycerol sebacate)-modified polylactic acid scaffolds with improved hydrophilicity, mechanical strength and bioactivity for bone tissue regeneration , 2015 .

[35]  Benjamin M. Wu,et al.  Recent advances in 3D printing of biomaterials , 2015, Journal of biological engineering.

[36]  Sophie C Cox,et al.  3D printing of porous hydroxyapatite scaffolds intended for use in bone tissue engineering applications. , 2015, Materials science & engineering. C, Materials for biological applications.

[37]  Y. Zuo,et al.  Cytocompatibility and osteogenesis evaluation of HA/GCPU composite as scaffolds for bone tissue engineering. , 2014, International journal of surgery.

[38]  Mo Song,et al.  Improving the mechanical properties of laser-sintered polyamide 12 through incorporation of carbon nanotubes , 2013 .

[39]  Jie Ren,et al.  Fabrication of Porous Scaffolds with a Controllable Microstructure and Mechanical Properties by Porogen Fusion Technique , 2011, International journal of molecular sciences.

[40]  Jia-You Fang,et al.  Development and evaluation of lipid nanoparticles for camptothecin delivery: a comparison of solid lipid nanoparticles, nanostructured lipid carriers, and lipid emulsion , 2008, Acta Pharmacologica Sinica.

[41]  Ralph Müller,et al.  Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds. , 2012, Acta biomaterialia.