Effect of valeric acid on the agglomeration of zirconia particles and effects of the sintering temperature on the strut wall thickness of particle-stabilized foam
暂无分享,去创建一个
[1] Jang-Hoon Ha,et al. Particle-stabilized ultra-low density zirconia toughened alumina foams , 2013 .
[2] Chang‐an Wang,et al. Effects of mono-dispersed PMMA micro-balls as pore-forming agent on the properties of porous YSZ ceramics , 2013 .
[3] Jang-Hoon Ha,et al. The fabrication and characterization of sintered diatomite for potential microfiltration applications , 2013 .
[4] K. Kim,et al. Porous zirconia/hydroxyapatite scaffolds for bone reconstruction. , 2012, Dental materials : official publication of the Academy of Dental Materials.
[5] Yumin Zhang,et al. A novel decompress-freezing process for ultra-high porosity ZrO2 ceramics , 2012 .
[6] Jang-Hoon Ha,et al. Effect of Process Conditions on the Microstructure of Particle-Stabilized Al 2 O 3 Foam , 2012 .
[7] L. Treccani,et al. Highly efficient enzyme-functionalized porous zirconia microtubes for bacteria filtration. , 2012, Environmental science & technology.
[8] W. Tseng,et al. Effect of sodium dodecul sulfate on stability of gibbsite platelet stabilized emulsion foams , 2012 .
[9] Sen Li,et al. Preparation of Si3N4 foam ceramics with nest-like cell structure by particle-stabilized foams , 2012 .
[10] C. Hsueh,et al. Low thermal conductivity of porous Al2O3 foams for SOFC insulation , 2011 .
[11] L. Gauckler,et al. Contact angle and adsorption behavior of carboxylic acids on α-Al2O3 surfaces. , 2011, Journal of colloid and interface science.
[12] L. Treccani,et al. Development and characterisation of functionalised ceramic microtubes for bacteria filtration , 2010 .
[13] A. Kohyama,et al. Development of multi-functional NITE-porous SiC for ceramic insulators , 2009 .
[14] J. Bradley,et al. Synthesis and characterisation of macroporous Yttria Stabilised Zirconia (YSZ) using polystyrene spheres as templates , 2009 .
[15] Jian Xu,et al. Aqueous foams stabilized by Laponite and CTAB , 2008 .
[16] I. Song,et al. Processing and properties of polysiloxane-derived porous silicon carbide ceramics using hollow microspheres as templates , 2008 .
[17] Ulrich Vogt,et al. Macroporous silicon carbide foams for porous burner applications and catalyst supports , 2007 .
[18] L. Gauckler,et al. Tailoring the microstructure of particle-stabilized wet foams. , 2007, Langmuir : the ACS journal of surfaces and colloids.
[19] L. Gauckler,et al. Macroporous Ceramics from Particle-Stabilized Wet Foams , 2007 .
[20] L. Gauckler,et al. Stabilization of foams with inorganic colloidal particles. , 2006, Langmuir : the ACS journal of surfaces and colloids.
[21] André R. Studart,et al. Processing Routes to Macroporous Ceramics: A Review , 2006 .
[22] André R Studart,et al. Ultrastable particle-stabilized foams. , 2006, Angewandte Chemie.
[23] Joerg Adler,et al. Ceramic Diesel Particulate Filters , 2005 .
[24] Patrick M. Kelly,et al. Transformation Toughening in Zirconia‐Containing Ceramics , 2004 .
[25] F. Ho,et al. Electrokinetic Properties of Colloidal Zirconia Powders in Aqueous Suspension , 2004 .
[26] D. Sen,et al. Effect of sintering temperature on pore growth in ZrO2–8 mol% Y2O3 ceramic compact prepared by citric acid gel route: a small-angle neutron scattering investigation , 2004 .
[27] E. Vicenzi,et al. Progress on yttria-stabilized zirconia sensors for hydrothermal pH measurements , 2003 .
[28] E. Levänen,et al. Effect of sintering temperature on functional properties of alumina membranes , 2002 .
[29] Z. Yufeng,et al. Effect of dispersants on surface chemical properties of nano-zirconia suspensions , 2000 .
[30] C. Piconi,et al. Zirconia as a ceramic biomaterial. , 1999, Biomaterials.
[31] N. Minh. Ceramic Fuel Cells , 1993 .
[32] L. Gauckler,et al. Ceramic Foam For Molten metal Filtration , 1985 .
[33] Tapan K. Gupta,et al. Stabilization of tetragonal phase in polycrystalline zirconia , 1977 .
[34] P. Nicholson,et al. Phase Analysis in Zirconia Systems , 1972 .