Determination of longitudinal profile of railway track using vehicle-based inertial readings

The longitudinal profile of a railway track excites a dynamic response in a train which can potentially be used to determine that profile. A method is proposed in this paper for the determination of the longitudinal profile through an analysis of bogie vertical accelerations and angular velocities resulting from the train/track dynamic interaction. The cross-entropy optimisation technique is applied to determine the railway track profile elevations that generate a vehicle response which best fits the measured dynamic response of a railway carriage bogie. Numerical validation of the concept is achieved by using a two-dimensional quarter-car dynamic model, representing a railway carriage and bogie, traversing an infinitely stiff profile. The concept is further tested by the introduction of a two-dimensional car dynamic vehicle model and a three-layer track model to infer the track profile in the longitudinal direction. Both interaction models are implemented in Matlab. Various grades of track irregularity are generated which excite the vehicle inducing a dynamic response. Ten vertical elevations are found at a time which give a least squares fit of theoretical to measured accelerations and angular velocity. In each time step, half of these elevations are retained and a new optimisation is used to determine the next 10 elevations along the length of the track. The optimised elevations are collated to determine the overall longitudinal profile over a finite length of railway track.

[1]  José M. Goicolea,et al.  Comparison of dynamic effects of high-speed traffic load on ballasted track using a simplified two-dimensional and full three-dimensional model , 2014 .

[2]  Nao-Aki Noda,et al.  ANALYSES OF DYNAMIC RESPONSE OF VEHICLE AND TRACK COUPLING SYSTEM WITH RANDOM IRREGULARITY OF TRACK VERTICAL PROFILE , 2002 .

[3]  Manicka Dhanasekar,et al.  A dynamic model for the vertical interaction of the rail track and wagon system , 2002 .

[4]  Eugene J. O'Brien,et al.  Drive-by detection of railway track stiffness variation using in-service vehicles , 2017 .

[5]  T. Belytschko,et al.  A first course in finite elements , 2007 .

[6]  J. W. Tedesco,et al.  Structural Dynamics: Theory and Applications , 1998 .

[7]  Sunghoon Choi,et al.  A Mixed Filtering Approach for Track Condition Monitoring Using Accelerometers on the Axle Box and Bogie , 2012, IEEE Transactions on Instrumentation and Measurement.

[8]  R. Frohling.  Deterioration of railway track due to dynamic vehicle loading and spatially varying track stiffness , 1997 .

[9]  X Lei,et al.  Influence of Track Stiffness Distribution on Vehicle and Track Interactions in Track Transition , 2010 .

[10]  Eugene J. O'Brien,et al.  Adaptation of Cross Entropy optimisation to a dynamic Bridge WIM calibration problem , 2012 .

[11]  Christian Soize,et al.  Track irregularities stochastic modeling , 2011 .

[12]  T. Belytschko,et al.  A First Course in Finite Elements: Belytschko/A First Course in Finite Elements , 2007 .

[13]  Simon Iwnicki,et al.  Handbook of railway vehicle dynamics , 2006 .

[14]  Simon P. Wilson,et al.  The use of Bayesian statistics to predict patterns of spatial repeatability , 2006 .

[15]  Wanming Zhai,et al.  TWO SIMPLE FAST INTEGRATION METHODS FOR LARGE‐SCALE DYNAMIC PROBLEMS IN ENGINEERING , 1996 .

[16]  Paul Weston,et al.  Perspectives on railway track geometry condition monitoring from in-service railway vehicles , 2015 .

[17]  Jianhui Lin,et al.  Modelling and experiment of railway ballast vibrations , 2004 .

[18]  Sankaran Mahadevan,et al.  Multi-fidelity approach to dynamics model calibration , 2016 .

[19]  Yeong-Bin Yang,et al.  Vehicle–bridge interaction dynamics and potential applications , 2005 .

[20]  Abdur Rohim Boy Berawi.  Improving Railway Track Maintenance Using Power Spectral Density (PSD) , 2013 .

[21]  Eugene J. O'Brien,et al.  Characterisation of pavement profile heights using accelerometer readings and a combinatorial optimisation technique , 2010 .

[22]  Ping Lou,et al.  Finite element analysis for train–track–bridge interaction system , 2007 .

[23]  Gui-Rong Liu,et al.  The Finite Element Method , 2007 .

[24]  Frederic Ward Williams,et al.  Symplectic analysis of vertical random vibration for coupled vehicle–track systems , 2008 .

[25]  Eugene J. O'Brien,et al.  Train–track–bridge modelling and review of parameters , 2016 .

[26]  William Weaver,et al.  Structural dynamics by finite elements , 1987 .

[27]  Daniel Cantero,et al.  Railway infrastructure damage detection using wavelet transformed acceleration response of traversing vehicle , 2015 .

[28]  Shie Mannor,et al.  A Tutorial on the Cross-Entropy Method , 2005, Ann. Oper. Res..

[29]  Edward L. Wilson,et al.  Numerical methods in finite element analysis , 1976 .

[30]  C. Roberts,et al.  Monitoring vertical track irregularity from in-service railway vehicles , 2007 .

[31]  Laura Montalbán,et al.  Determination of Rail Vertical Profile through Inertial Methods , 2011 .

[32]  M. D. Martínez-Rodrigo,et al.  Influence of the vehicle model on the prediction of the maximum bending response of simply-supported bridges under high-speed railway traffic , 2014 .

[33]  N. K. Cooperrider,et al.  Guideway-Suspension Tradeoffs in Rail Vehicle Systems , 1981 .