Transport properties of porous membranes based on electrospun nanofibers

Abstract Electrospinning is a process by which high voltages are used to produce an interconnected membrane-like web of small fibers (10–500 nm in diameter). This novel fiber spinning technique provides the capacity to lace together a variety of types of polymers, fibers, and particles to produce ultrathin layers. Of particular interest are electrospun membranes composed of elastomeric fibers, which are under development for several protective clothing applications. The various factors influencing electrospun nonwoven fibrous membrane structure and transport properties are discussed. Performance measurements on experimental electrospun fiber mats compare favorably with transport properties of textiles and membranes currently used in protective clothing systems. Electrospun layers present minimal impedance to moisture vapor diffusion required for evaporative cooling. There may be special considerations in the application of elastomeric membranes for protective clothing. Effects of membrane distortion upon transport behavior of the structure might be significant. Preliminary measurements have found that changes in elastomeric membrane structure under different states of biaxial strain were reflected in measurements of air flow through the membrane. Changes in membrane structure are also evident in environmental scanning electron microscope (SEM) images of the pore/fiber rearrangement as the membrane is stretched. Experimental measurements and theoretical calculations show electrospun fiber mats to be extremely efficient at trapping airborne particles. The high filtration efficiency is a direct result of the submicron-size fibers generated by the electrospinning process. Electrospun nanofiber coatings were applied directly to an open cell polyurethane foam. The air flow resistance and aerosol filtration properties correlate with the electrospun coating add-on weight. Particle penetration through the foam layer, which is normally very high, was eliminated by extremely thin layers of electrospun nanofibers sprayed on to the surface of the foam. Electrospun fiber coatings produce an exceptionally lightweight multifunctional membrane for protective clothing applications, which exhibits high breathability, elasticity, and filtration efficiency.

[1]  P. Baumgarten,et al.  Electrostatic spinning of acrylic microfibers , 1971 .

[2]  F. Dullien.  Porous Media: Fluid Transport and Pore Structure , 1979 .

[3]  Phillip Gibson,et al.  Convection/diffusion test method for porous textiles , 2000 .

[4]  Steven Paquette,et al.  3D scanning in apparel design and human engineering , 1996, IEEE Computer Graphics and Applications.

[5]  John H. Seinfeld,et al.  Fundamentals of Air Pollution Engineering , 1988 .

[6]  Darrell H. Reneker,et al.  Electrospinning process and applications of electrospun fibers , 1995 .

[7]  Majid Charmchi,et al.  An Automated Water Vapor Diffusion Test Method for Fabrics, Laminates, and Films , 1995 .

[8]  K. W. Lee,et al.  Theoretical Study of Aerosol Filtration by Fibrous Filters , 1982 .

[9]  G. Danilatos.  Introduction to the ESEM instrument , 1993, Microscopy research and technique.

[10]  D. Reneker,et al.  Polybenzimidazole nanofiber produced by electrospinning , 1999 .

[11]  P. Gibson,et al.  Humidity-Dependent Air Permeability of Textile Materials1 , 1999 .

[12]  Petersen,et al.  A Test Method to Determine the Relative Humidity Dependence of the Air Permeability of Woven Textile Fabrics , 1997 .

[13]  Majid Charmchi,et al.  Modeling convection/diffusion processes in porous textiles with inclusion of humidity-dependent air permeability , 1997 .

[14]  D. Reneker,et al.  Nanometre diameter fibres of polymer, produced by electrospinning , 1996 .

[15]  Donald Rivin,et al.  Electrospun fiber mats: Transport properties , 1999 .

[16]  K. Spurny,et al.  Advances in aerosol filtration , 1998 .

[17]  L. Larrondo,et al.  Electrostatic fiber spinning from polymer melts. I. Experimental observations on fiber formation and properties , 1981 .

[18]  Majid Charmchi,et al.  The use of volume‐averaging techniques to predict temperature transients due to water vapor sorption in hygroscopic porous polymer materials , 1997 .