A novel porous hydrogel based on hybrid gelation for injectable and tough scaffold implantation and tissue engineering applications

Although there have been many advances in injectable hydrogels as scaffolds for tissue engineering or as payload-containing vehicles, the lack of adequate microporosity for the desired cell behavior, tissue integration, and successful tissue generation remains an important drawback. Herein, we describe an effective porous injectable system that allows in vivo formation of pores through conventional syringe injection at room temperature. This system is based on the differential melting profiles of photocrosslinkable salmon gelatin and physically crosslinked porogens of porcine gelatin (PG), in which PG porogens are solid beads, while salmon methacrylamide gelatin remains liquid during the injection procedure. After injection and photocrosslinking, the porogens were degraded in response to the physiological temperature, enabling the generation of a homogeneous porous structure within the hydrogel. The resultant porogen-containing formulations exhibited controlled gelation kinetics within a broad temperature window (18.5 ± 0.5–28.8 ± 0.8 °C), low viscosity (133 ± 1.4–188 ± 16 cP), low force requirements for injectability (17 ± 0.3–39 ± 1 N), robust mechanical properties after photo-crosslinking (100.9 ± 3.4–332 ± 13.2 kPa), and favorable cytocompatibility (>70% cell viability). Remarkably, in vivo subcutaneous injection demonstrated the suitability of the system with appropriate viscosity and swift crosslinking to generate porous hydrogels. The resulting injected porous constructs showed favorable biocompatibility and facilitated cell infiltration for desirable potential tissue remodeling. Finally, the porogen-containing formulations exhibited favorable handling, easy deposition, and good shape fidelity when used as bioinks in 3D bioprinting technology. This injectable porous system serves as a platform for various biomedical applications, thereby inspiring future advances in cell therapy and tissue engineering.

[1]  J. Blaker,et al.  A Psychrophilic GelMA: Breaking Technical and Immunological Barriers for Multimaterial High-Resolution 3D Bioprinting. , 2022, Biomacromolecules.

[2]  M. Akbari,et al.  Hydrogels for Tissue Engineering: Addressing Key Design Needs Toward Clinical Translation , 2022, Frontiers in Bioengineering and Biotechnology.

[3]  Sang-Hyug Park,et al.  Highly porous and injectable hydrogels derived from cartilage acellularized matrix exhibit reduction and NIR light dual-responsive drug release properties for application in antitumor therapy , 2022, NPG Asia Materials.

[4]  R. Debret,et al.  Design and characterization of an in vivo injectable hydrogel with effervescently generated porosity for regenerative medicine applications. , 2021, Acta biomaterialia.

[5]  J. Alonso,et al.  Injectable Hydrogels: From Laboratory to Industrialization , 2021, Polymers.

[6]  H. Yang,et al.  Advances in biodegradable and injectable hydrogels for biomedical applications. , 2020, Journal of controlled release : official journal of the Controlled Release Society.

[7]  Sun-Jong Kim,et al.  Influence of Mineral Oil Lubricant of surgical handpiece on dental Implant osseointegration: In vitro and animal study , 2020 .

[8]  Alexander K. Nguyen,et al.  The Photoinitiator Lithium Phenyl (2,4,6-Trimethylbenzoyl) Phosphinate with Exposure to 405 nm Light Is Cytotoxic to Mammalian Cells but Not Mutagenic in Bacterial Reverse Mutation Assays , 2020, Polymers.

[9]  Yuan Yuan,et al.  Fabrication of Injectable, Porous Hyaluronic Acid Hydrogel Based on an In-Situ Bubble-Forming Hydrogel Entrapment Process , 2020, Polymers.

[10]  J. Blaker,et al.  Cold-adaptation of a methacrylamide gelatin towards the expansion of the biomaterial toolbox for specialized functionalities in tissue engineering. , 2019, Materials science & engineering. C, Materials for biological applications.

[11]  G. Genin,et al.  Cryoprotectant enables structural control of porous scaffolds for exploration of cellular mechano-responsiveness in 3D , 2019, Nature Communications.

[12]  Gary J Hooper,et al.  Visible Light Cross-Linking of Gelatin Hydrogels Offers an Enhanced Cell Microenvironment with Improved Light Penetration Depth. , 2019, Macromolecular bioscience.

[13]  Jin Hyun Lee.  Injectable hydrogels delivering therapeutic agents for disease treatment and tissue engineering , 2018, Biomaterials Research.

[14]  S. Suye,et al.  Native collagen hydrogel nanofibres with anisotropic structure using core-shell electrospinning , 2018, Scientific Reports.

[15]  Tatiana Segura,et al.  In situ forming injectable hydrogels for drug delivery and wound repair☆ , 2018, Advanced drug delivery reviews.

[16]  Howon Lee,et al.  Micro 3D Printing of a Temperature-Responsive Hydrogel Using Projection Micro-Stereolithography , 2018, Scientific Reports.

[17]  Shawn A. Chester,et al.  Micro 3D Printing of a Temperature-Responsive Hydrogel Using Projection Micro-Stereolithography , 2018, Scientific Reports.

[18]  Ali Khademhosseini,et al.  Coaxial extrusion bioprinting of 3D microfibrous constructs with cell-favorable gelatin methacryloyl microenvironments , 2018, Biofabrication.

[19]  Peter Pivonka,et al.  Handheld Co-Axial Bioprinting: Application to in situ surgical cartilage repair , 2017, Scientific Reports.

[20]  Dongan Wang,et al.  Macroporous Hydrogel Scaffolds for Three-Dimensional Cell Culture and Tissue Engineering. , 2017, Tissue engineering. Part B, Reviews.

[21]  Julian Alverio,et al.  Layer-by-layer approach for a uniformed fabrication of a cell patterned vessel-like construct , 2016, Biofabrication.

[22]  P. Butler,et al.  Injectable Pore-Forming Hydrogel Scaffolds for Complex Wound Tissue Engineering: Designing and Controlling Their Porosity and Mechanical Properties. , 2016, Tissue engineering. Part B, Reviews.

[23]  Dongan Wang,et al.  Enhancing vascularization of a gelatin-based micro-cavitary hydrogel by increasing the density of the micro-cavities , 2016, Biomedical materials.

[24]  Dongan Wang,et al.  Development of size-customized hepatocarcinoma spheroids as a potential drug testing platform using a sacrificial gelatin microsphere system. , 2016, Materials science & engineering. C, Materials for biological applications.

[25]  N. Kawazoe,et al.  Gelatin Scaffolds with Controlled Pore Structure and Mechanical Property for Cartilage Tissue Engineering. , 2016, Tissue engineering. Part C, Methods.

[26]  A. Khademhosseini,et al.  Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels. , 2015, Biomaterials.

[27]  H. Bianco-Peled,et al.  A novel design of injectable porous hydrogels with in situ pore formation. , 2014, Acta biomaterialia.

[28]  Robert Langer,et al.  A Perspective on the Clinical Translation of Scaffolds for Tissue Engineering , 2014, Annals of Biomedical Engineering.

[29]  Raimund Jaeger,et al.  Laser-structured bacterial nanocellulose hydrogels support ingrowth and differentiation of chondrocytes and show potential as cartilage implants. , 2014, Acta biomaterialia.

[30]  Li-Hsin Han,et al.  Dynamic tissue engineering scaffolds with stimuli-responsive macroporosity formation. , 2013, Biomaterials.

[31]  David J Mooney,et al.  Injectable preformed scaffolds with shape-memory properties , 2012, Proceedings of the National Academy of Sciences.

[32]  S. Matiacevich,et al.  State diagram of salmon (Salmo salar) gelatin films. , 2011, Journal of the science of food and agriculture.

[33]  Ming-Huei Cheng,et al.  The role of pore size on vascularization and tissue remodeling in PEG hydrogels. , 2011, Biomaterials.

[34]  François Berthiaume,et al.  Tissue Engineering and Regenerative Medicine : History , Progress , and Challenges , 2013 .

[35]  Amir A. Al-Munajjed,et al.  The healing of bony defects by cell-free collagen-based scaffolds compared to stem cell-seeded tissue engineered constructs. , 2010, Biomaterials.

[36]  A. Khademhosseini,et al.  Cell-laden microengineered gelatin methacrylate hydrogels. , 2010, Biomaterials.

[37]  Ali Khademhosseini,et al.  Controlling the porosity and microarchitecture of hydrogels for tissue engineering. , 2010, Tissue engineering. Part B, Reviews.

[38]  Nic D. Leipzig,et al.  The effect of substrate stiffness on adult neural stem cell behavior. , 2009, Biomaterials.

[39]  A. Sabnis,et al.  Cytocompatibility studies of an in situ photopolymerized thermoresponsive hydrogel nanoparticle system using human aortic smooth muscle cells. , 2009, Journal of biomedical materials research. Part A.

[40]  Lin Lu,et al.  Porogen-based solid freeform fabrication of polycaprolactone-calcium phosphate scaffolds for tissue engineering. , 2006, Biomaterials.

[41]  Peter X Ma,et al.  Nano-fibrous poly(L-lactic acid) scaffolds with interconnected spherical macropores. , 2004, Biomaterials.

[42]  R. Colby,et al.  Kinetics of Triple Helix Formation in Semidilute Gelatin Solutions , 2003 .

[43]  Bo Mattiasson,et al.  Polymeric cryogels as promising materials of biotechnological interest. , 2003, Trends in biotechnology.

[44]  M. Djabourov,et al.  All Gelatin Networks: 1. Biodiversity and Physical Chemistry† , 2002 .

[45]  C. Dambmann,et al.  Improved Method for Determining Food Protein Degree of Hydrolysis , 2001 .

[46]  J. Kreuter,et al.  Gelatin nanoparticles by two step desolvation--a new preparation method, surface modifications and cell uptake. , 2000, Journal of microencapsulation.

[47]  M Cornelissen,et al.  Structural and rheological properties of methacrylamide modified gelatin hydrogels. , 2000, Biomacromolecules.

[48]  K E Healy,et al.  Engineering bone regeneration with bioabsorbable scaffolds with novel microarchitecture. , 1999, Tissue engineering.

[49]  Haiqiang Jin,et al.  Recent advances of injectable hydrogels for drug delivery and tissue engineering applications , 2020 .

[50]  L. Lucia,et al.  Hydrogels for Advanced Stem Cell Therapies: A Biomimetic Materials Approach for Enhancing Natural Tissue Function , 2019, IEEE Reviews in Biomedical Engineering.

[51]  David Dean,et al.  Evaluating 3D‐Printed Biomaterials as Scaffolds for Vascularized Bone Tissue Engineering , 2015, Advanced materials.

[52]  Dongan Wang,et al.  Effect of microcavitary alginate hydrogel with different pore sizes on chondrocyte culture for cartilage tissue engineering. , 2014, Materials science & engineering. C, Materials for biological applications.

[53]  Giancarlo Pennati,et al.  Biomechanical properties of human articular cartilage under compressive loads. , 2004, Biorheology.