A critical review of temperature separation in a vortex tube

The vortex tube is a simple device used in industry for generation of cold and hot air streams from a single compressed air supply. This simple device is very efficient in separation of air streams of different temperatures and has been the focus of investigation since the tube’s discovery. Different explanations for the phenomenon of the energy separation have been proposed, however there has not been a consensus in the hypothesis. The purpose of this paper is to present a critical review of current explanations on the working concept of a vortex tube. Hypotheses of pressure, viscosity, turbulence, temperature, secondary circulation and acoustic streaming are discussed in the paper, and presumably, future research will benefit from this discussion.

[1]  A. Gutsol.  The Ranque effect , 1997 .

[2]  K. Dincer,et al.  Experimental investigation of the effects of length to diameter ratio and nozzle number on the performance of counter flow Ranque–Hilsch vortex tubes , 2007 .

[3]  K. N. Visheratin,et al.  Cyclostrophic adjustment in swirling gas flows and the Ranque-Hilsch vortex tube effect , 2008 .

[4]  C. Gao.  Experimental study on the Ranque-Hilsch vortex tube , 2005 .

[5]  M. Perlmutter,et al.  Analysis of the flow and energy separation in a turbulent vortex , 1960 .

[6]  J. J. V. Deemter,et al.  On the theory of the Ranque-Hilsch cooling effect , 1952 .

[7]  M. Sibulkin,et al.  Unsteady, viscous, circular flow Part 3. Application to the Ranque-Hilsch vortex tube , 1962, Journal of Fluid Mechanics.

[8]  B. Ahlborn,et al.  The Heat Pump in a Vortex Tube , 1998 .

[9]  Bakhtier Farouk,et al.  Large eddy simulations of the flow field and temperature separation in the Ranque-Hilsch vortex tube , 2007 .

[10]  C. U. Linderstrøm-Lang.  The three-dimensional distributions of tangential velocity and total- temperature in vortex tubes , 1971 .

[11]  T. Kato,et al.  A study on temperature separation in a large vortex tube , 1983 .

[12]  Pongjet Promvonge,et al.  Numerical investigation of the thermal separation in a Ranque–Hilsch vortex tube , 2007 .

[13]  Seymour Comassar.  THE VORTEX TUBE , 2009 .

[14]  R. Karunanithi,et al.  CFD analysis and experimental investigations towards optimizing the parameters of Ranque-Hilsch vortex tube , 2005 .

[15]  Alan P. Reynolds.  Energy flows in a vortex tube , 1961 .

[16]  M. Kurosaka.  Acoustic streaming in swirling flow and the Ranque—Hilsch (vortex-tube) effect , 1982, Journal of Fluid Mechanics.

[17]  Frank Kreith,et al.  Heat transfer and friction in turbulent vortex flow , 1959 .

[18]  V. Trofimov.  Physical effect in Ranque vortex tubes , 2000 .

[19]  Bakhtier Farouk,et al.  Simulation of gas species and temperature separation in the counter-flow Ranque–Hilsch vortex tube using the large eddy simulation technique , 2009 .

[20]  R HILSCH,et al.  The use of the expansion of gases in a centrifugal field as cooling process. , 1947, The Review of scientific instruments.

[21]  W. S. Lewellen.  A solution for three-dimensional vortex flows with strong circulation , 1962, Journal of Fluid Mechanics.

[22]  R. Ricci,et al.  Numerical simulation of turbulent flow in a Ranque–Hilsch vortex tube , 2009 .

[23]  de Atam Fons Waele,et al.  Experimental study on a simple Ranque–Hilsch vortex tube , 2005 .

[24]  Subhash Jacob,et al.  Numerical investigations on flow behaviour and energy separation in Ranque–Hilsch vortex tube , 2008 .

[25]  B. I. Zaslavskii,et al.  Flow structure in a flat vortex chamber , 1998 .

[26]  B. Shannak.  Temperature separation and friction losses in vortex tube , 2004 .

[27]  A. Leont'ev.  Gas-Dynamic Methods of Temperature Stratification (a Review) , 2002 .

[28]  W. Fröhlingsdorf,et al.  Numerical investigations of the compressible flow and the energy separation in the Ranque-Hilsch vortex tube , 1999 .

[29]  R. T. Balmer,et al.  Pressure-Driven Ranque-Hilsch Temperature Separation in Liquids , 1988 .

[30]  A. Fartaj,et al.  Performance Characteristics of a Microscale Ranque–Hilsch Vortex Tube , 2008 .

[31]  M. Arjomandi,et al.  The effect of vortex angle on the efficiency of the Ranque–Hilsch vortex tube , 2008 .

[32]  Andrew M. Crocker,et al.  Experimental Results of a Vortex Tube Air Separator for Advanced Space Transportation , 2003 .

[33]  R. Westley.  A bibliography and survey of the vortex tube , 1954 .

[34]  Gregory Nellis,et al.  Parametric and internal study of the vortex tube using a CFD model , 2005 .

[35]  Sh. A. Piralishvili,et al.  Numerical Simulation of Swirling Flows in Vortex Tubes , 2005 .

[36]  J. Buchler,et al.  Coherent Transport of Angular Momentum: The Ranque‐Hilsch Tube as a Paradigm , 1999, astro-ph/9909022.

[37]  Jeffrey M. Gordon,et al.  The vortex tube as a classic thermodynamic refrigeration cycle , 2000 .

[38]  Pongjet Promvonge,et al.  Review of Ranque-Hilsch effects in vortex tubes , 2008 .

[39]  Sachin U. Nimbalkar,et al.  An experimental investigation of the optimum geometry for the cold end orifice of a vortex tube , 2009 .

[40]  B. Ahlborn,et al.  Secondary flow in a vortex tube , 1997 .

[41]  Orhan Aydin,et al.  An experimental study on the design parameters of a counterflow vortex tube , 2006 .

[42]  Y. Xue,et al.  An Investigation on the Effect of the Hot End Plugs on the Efficiency of the Ranque-Hilsch Vortex Tube , 2007 .

[43]  Kenneth G Hellyar.  Gas liquefaction using a Ranque-Hilsch vortex tube : design criteria and bibliography , 1979 .

[44]  J. E. Lay.  An Experimental and Analytical Study of Vortex-Flow Temperature Separation by Superposition of Spiral and Axial Flows: Part 1 , 1959 .

[45]  M. Kaya,et al.  A review on design criteria for vortex tubes , 2009 .

[46]  A. V. Lebedev,et al.  Observation of large-scale hydrodynamic structures in a vortex tube and the Ranque effect , 1997 .