Predictive modelling and optimization of performance and emissions of an auto-ignited heavy naphtha/n-heptane fueled HCCI engine using RSM

[1]  H. Solmaz,et al.  Optimization of operating conditions in a homogeneous charge compression ignition engine with variable compression ratio , 2022, International Journal of Environmental Science and Technology.

[2]  Tuğba Tabanlıgil Calam,et al.  Optimization of square wave voltammetry parameters by response surface methodology for the determination of Sunset yellow using an electrochemical sensor based on Purpald®. , 2022, Food chemistry.

[3]  Xing Li,et al.  RSM, ANN-GA and ANN-PSO modeling of SDBS removal from greywater in rural areas via Fe2O3-coated volcanic rocks , 2022, RSC advances.

[4]  T. Yoshitake,et al.  Monothetic Analysis and Response Surface Methodology Optimization of Calcium Alginate Microcapsules Characteristics , 2022, Polymers.

[5]  G. Theotokatos,et al.  Parametric investigation and optimal selection of the Hybrid Turbocharger system for a large marine four-stroke Dual-Fuel engine , 2022, Applied Thermal Engineering.

[6]  H. Solmaz,et al.  Experimental and statistical investigation of different valve lifts on HCCI combustion, performance and exhaust emissions using response surface method , 2022, Energy.

[7]  T. Wongwuttanasatian,et al.  Exploration of combustion behavior in a compression ignition engine fuelled with low-viscous Pimpinella anisum and waste cooking oil biodiesel blends , 2022, Journal of Cleaner Production.

[8]  Y. Varol,et al.  Combustion of high carbon (C7-C8) alcohol fuels in a reactivity controlled compression ignition (RCCI) engine as low reactivity fuels and ANN approach to predict RCCI emissions , 2022, Fuel.

[9]  Q. Xia,et al.  A simulation of ethanol substitution rate and EGR effect on combustion and emissions from a high-loaded diesel/ethanol dual-fuel engine , 2022, Fuel.

[10]  Ömer Özyurt,et al.  Bina soğutma kapasitesine etki eden parametrelerin yanıt yüzey yöntemi (YYY) kullanılarak incelenmesi , 2021, Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi.

[11]  Özer Can,et al.  Multi-objective optimization of DI diesel engine performance and emission parameters fueled with Jet-A1 – Diesel blends , 2021, Energy.

[12]  C. Srinidhi,et al.  RSM based parameter optimization of CI engine fuelled with nickel oxide dosed Azadirachta indica methyl ester , 2021 .

[13]  H. Solmaz,et al.  Multi objective optimization of HCCI combustion fuelled with fusel oil and n-heptane blends , 2021, Renewable Energy.

[14]  S. Uslu,et al.  Improving the combustion process by determining the optimum percentage of liquefied petroleum gas (LPG) via response surface methodology (RSM) in a spark ignition (SI) engine running on gasoline-LPG blends , 2021 .

[15]  C. Haşimoğlu,et al.  Effects of n-heptane/toluene/ethanol ternary fuel blends on combustion, operating range and emissions in premixed low temperature combustion , 2021, Fuel.

[16]  O. Lim,et al.  The Internal Residual Gas and Effective Release Energy of a Spark-Ignition Engine with Various Inlet Port–Bore Ratios and Full Load Condition , 2021, Energies.

[17]  Benjamin Lawler,et al.  LTC performance of C1–C4 water-alcohol blends with the same cooling potential , 2021 .

[18]  H. Solmaz,et al.  Effect of nitrogen and hydrogen addition on performance and emissions in reactivity controlled compression ignition , 2021 .

[19]  Priyaranjan Sharma,et al.  Measurement of WEDM performance characteristics of aero-engine alloy using RSM-based TLBO algorithm , 2021, Measurement.

[20]  H. Solmaz,et al.  Modelling of performance, emission, and combustion of an HCCI engine fueled with fusel oil-diethylether fuel blends as a renewable fuel , 2021 .

[21]  H. Solmaz,et al.  Prediction of performance and exhaust emissions of a CI engine fueled with multi-wall carbon nanotube doped biodiesel-diesel blends using response surface method , 2021, Energy.

[22]  S. K. Mahla,et al.  Determination and utilization of optimal diesel/n-butanol/biogas derivation for small utility dual fuel diesel engine , 2021 .

[23]  M. A. Sobati,et al.  Performance and emission of a diesel engine using different water/waste fish oil (WFO) biodiesel/diesel emulsion fuels: Optimization of fuel formulation via response surface methodology (RSM) , 2021 .

[24]  Shan Zhou,et al.  Enhancing public building energy efficiency using the response surface method: An optimal design approach , 2021 .

[25]  Ming-Chia Lai,et al.  A review of controlling strategies of the ignition timing and combustion phase in homogeneous charge compression ignition (HCCI) engine , 2021 .

[26]  Tuğba Tabanlıgil Calam.  Electrochemical Behavior and Voltammetric Determination of 2-Nitrophenol on Glassy Carbon Electrode Surface Modified with 1-Amino-2-Naphthol-4-Sulphonic Acid , 2021, Engineering Perspective.

[27]  H. Solmaz,et al.  Operating range, combustion, performance and emissions of an HCCI engine fueled with naphtha , 2021 .

[28]  A. Agarwal,et al.  Evaluation of comparative engine combustion, performance and emission characteristics of low temperature combustion (PCCI and RCCI) modes , 2020 .

[29]  H. Solmaz,et al.  Experimental investigation on the combustion, performance and exhaust emission characteristics of poppy oil biodiesel-diesel dual fuel combustion in a CI engine , 2020, Fuel.

[30]  Zunqing Zheng,et al.  Experimental investigation on the effects of octane sensitivity on partially premixed low-temperature combustion , 2020 .

[31]  M. Azadbakht,et al.  Application of response surface method to energy and exergy analyses of the ohmic heating dryer for sour orange juice , 2020 .

[32]  Alper Calam.  Homojen Dolgulu Sıkıştırma ile Ateşlemeli Bir Motorda N-Heptan-Tetrahidrofuran Karışımlarının Yanma, Performans Ve Emisyonlara Etkisi , 2020 .

[33]  H. Solmaz.  A comparative study on the usage of fusel oil and reference fuels in an HCCI engine at different compression ratios , 2020 .

[34]  E. Yılmaz.  A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine , 2020, International Journal of Automotive Science And Technology.

[35]  S. Uslu,et al.  Determination of a diesel engine operating parameters powered with canola, safflower and waste vegetable oil based biodiesel combination using response surface methodology (RSM) , 2020 .

[36]  Tuğba Tabanlıgil Calam,et al.  Electrochemical determination of 8-hydroxyquinoline in a cosmetic product on a glassy carbon electrode modified with 1-amino-2-naphthol-4-sulphonic acid , 2020 .

[37]  H. Solmaz,et al.  An Experimental Research on the Effects of Negative Valve Overlap on Performance and Operating Range in a Homogeneous Charge Compression Ignition Engine With RON40 and RON60 Fuels , 2020 .

[38]  H. Solmaz,et al.  Optimization of the operating conditions of a beta-type rhombic drive stirling engine by using response surface method , 2020 .

[39]  Serdar Halis,et al.  The comparison of combustion, engine performance and emission characteristics of ethanol, methanol, fusel oil, butanol, isopropanol and naphtha with n-heptane blends on HCCI engine , 2020 .

[40]  Ahmet Uyumaz,et al.  The effects of diisopropyl ether on combustion, performance, emissions and operating range in a HCCI engine , 2020 .

[41]  R. Taccani,et al.  A review of emissions reduction technologies for low and medium speed marine Diesel engines and their potential for waste heat recovery , 2020 .

[42]  C. Bae,et al.  Comparisons of advanced combustion technologies (HCCI, PCCI, and dual-fuel PCCI) on engine performance and emission characteristics in a heavy-duty diesel engine , 2020 .

[43]  Bilal Aydoğan.  An experimental examination of the effects of n-hexane and n-heptane fuel blends on combustion, performance and emissions characteristics in a HCCI engine , 2020, Energy.

[44]  A. Elwardany,et al.  Effect of cracked naphtha/biodiesel/diesel blends on performance, combustion and emissions characteristics of compression ignition engine , 2020 .

[45]  Yingjie Chen,et al.  Study of injection pressure couple with EGR on combustion performance and emissions of natural gas-diesel dual-fuel engine , 2020 .

[46]  M. Gad,et al.  Effect of biodiesel fuels on diesel engine emissions , 2019, Egyptian Journal of Petroleum.

[47]  Tuğba Tabanlıgil Calam.  Analytical application of the poly(1H-1,2,4-triazole-3-thiol) modified gold electrode for high-sensitive voltammetric determination of catechol in tap and lake water samples , 2019, International Journal of Environmental Analytical Chemistry.

[48]  H. Solmaz,et al.  Investigation of effect of compression ratio on combustion and exhaust emissions in A HCCI engine , 2019, Energy.

[49]  Sotirios Mamalis,et al.  A predictive 0-D HCCI combustion model for ethanol, natural gas, gasoline, and primary reference fuel blends , 2019, Fuel.

[50]  Tuğba Tabanlıgil Calam.  Electrochemical Oxidative Determination and Electrochemical Behavior of 4‐Nitrophenol Based on an Au Electrode Modified with Electro‐polymerized 3,5‐Diamino‐1,2,4‐triazole Film , 2019, Electroanalysis.

[51]  M. Rather,et al.  A Numerical Study on the Effects of Exhaust Gas Recirculation Temperature on Controlling Combustion and Emissions of a Diesel Engine running on HCCI Combustion Mode , 2018, International Journal of Automotive Science And Technology.

[52]  M. F. Ghazali,et al.  A review on the application of response surface method and artificial neural network in engine performance and exhaust emissions characteristics in alternative fuel , 2018 .

[53]  K. V. Yatish,et al.  Optimization of bauhinia variegata biodiesel production and its performance, combustion and emission study on diesel engine , 2018, Renewable Energy.

[54]  Sotirios Mamalis,et al.  Efficiency and Emissions Characteristics of an HCCI Engine Fueled by Primary Reference Fuels , 2018 .

[55]  Orgun A. Guralp,et al.  HCCI combustion with an actively controlled glow plug: The effects on heat release, thermal stratification, efficiency, and emissions , 2018 .

[56]  Kamarul Arifin Ahmad,et al.  HCNG fueled spark-ignition (SI) engine with its effects on performance and emissions , 2018 .

[57]  Hervé Jeanmart,et al.  EGR control on operation of a tar tolerant HCCI engine with simulated syngas from biomass , 2017, Applied Energy.

[58]  Gilbert Laporte,et al.  Battery degradation and behaviour for electric vehicles: Review and numerical analyses of several models , 2017 .

[59]  H. Solmaz,et al.  Experimental comparison of different injection timings in an HCCI engine fueled with n-heptane , 2017 .

[60]  Nadir Yilmaz,et al.  Optimization of diesel-butanol-vegetable oil blend ratios based on engine operating parameters. , 2016 .

[61]  Xiaoye Han,et al.  Suitability Study of n-Butanol for Enabling PCCI and HCCI and RCCI Combustion on a High Compression-ratio Diesel Engine , 2015 .

[62]  Bedri Yüksel,et al.  Response surface methodology based optimization of diesel-n-butanol-cotton oil ternary blend ratios to improve engine performance and exhaust emission characteristics. , 2015 .

[63]  Yoann Viollet,et al.  Compression Ratio and Derived Cetane Number Effects on Gasoline Compression Ignition Engine Running with Naphtha Fuels , 2014 .

[64]  Junseok Chang,et al.  Vehicle Demonstration of Naphtha Fuel Achieving Both High Efficiency and Drivability with EURO6 Engine-Out NOx Emission , 2013 .

[65]  de Lph Philip Goey,et al.  Commercial Naphtha Blends for Partially Premixed Combustion , 2013 .

[66]  A. Rahimi,et al.  Availability analysis of n-heptane and natural gas blends combustion in HCCI engines , 2011 .