Multi-energy computed tomography using pre-reconstruction decomposition and iterative reconstruction algorithms

The three-dimensional distribution of the materials composing a sample is reconstructed using multiple-energy computed tomography techniques. The a priori knowledge about the specific materials that are present in the sample is used for decomposing the measured intensity projections into projected thicknesses of each component material. Those decomposed projections are then processed using iterative reconstruction algorithms to separately obtain the three-dimensional distribution of each material. A new iterative reconstruction algorithm has been implemented and its performance is compared to the standard filtered back projection and to another existing iterative algorithm based on histogram manipulation. The method is first tested with simulations on data for a realistic, three-materials' numerical sample and then applied to experimental micro-tomography data. The accuracy of the reconstruction from experimental data is tested by means of an energy dispersive x-ray spectroscopy scan of the sample.

[1]  A. Macovski,et al.  Energy-selective reconstructions in X-ray computerised tomography , 1976, Physics in medicine and biology.

[2]  T E Gureyev,et al.  Phase-contrast tomography of single-material objects from few projections. , 2008, Optics express.

[3]  S. Wilkins,et al.  X-ray phase-contrast microscopy and microtomography. , 2003, Optics express.

[4]  F. Natterer.  The Mathematics of Computerized Tomography , 1986 .

[5]  T. Gureyev,et al.  The binary dissector: phase contrast tomography of two- and three-material objects from few projections. , 2008, Optics express.

[6]  Timur E. Gureyev,et al.  A general few-projection method for tomographic reconstruction of samples consisting of several distinct materials , 2010 .

[7]  W. Kalender.  X-ray computed tomography , 2006, Physics in medicine and biology.

[8]  Thilo Michel,et al.  Contrast agent recognition in small animal CT using the Medipix2 detector , 2009 .

[9]  F E Merrill,et al.  Charged particle radiography , 2013, Reports on progress in physics. Physical Society.

[10]  W. D. Friedman,et al.  Review of dual-energy computed tomography techniques , 1990 .

[11]  M. Drangova,et al.  Implementation of dual- and triple-energy cone-beam micro-CT for postreconstruction material decomposition. , 2008, Medical physics.

[12]  Xiaochuan Pan,et al.  Impact of polychromatic x-ray sources on helical, cone-beam computed tomography and dual-energy methods. , 2004, Physics in medicine and biology.

[13]  Polad M Shikhaliev.  Photon counting spectral CT: improved material decomposition with K-edge-filtered x-rays. , 2012, Physics in medicine and biology.

[14]  J. Schlomka,et al.  Experimental feasibility of multi-energy photon-counting K-edge imaging in pre-clinical computed tomography , 2008, Physics in medicine and biology.

[15]  K. Taguchi,et al.  Material separation in x-ray CT with energy resolved photon-counting detectors. , 2011, Medical physics.

[16]  Cynthia H McCollough,et al.  Pre-reconstruction three-material decomposition in dual-energy CT , 2009, Medical Imaging.

[17]  Timur E. Gureyev,et al.  Feasibility of a data-constrained prediction of hydrocarbon reservoir sandstone microstructures , 2010 .

[18]  Dominique Drouin,et al.  CASINO V2.42: a fast and easy-to-use modeling tool for scanning electron microscopy and microanalysis users. , 2007, Scanning.

[19]  S. L. Wellington,et al.  Tomographic imaging of three‐phase flow experiments , 1987 .

[20]  Sam Yang,et al.  A Data-Constrained 3D Model for Material Compositional Microstructures , 2008 .

[21]  S. Mayo,et al.  Data-Constrained Microstructure Characterization with Multispectrum X-Ray Micro-CT , 2012, Microscopy and Microanalysis.

[22]  P. Shikhaliev.  Computed tomography with energy-resolved detection: a feasibility study , 2008, Physics in medicine and biology.