Abstract The failure modes of AlGaAs GaAs heterojunction bipolar transistors (HBTs) showing increases of base leakage current found during the bias and temperature reliability test have been examined and analysed by using an electrostatic discharge (ESD) method. In the examination for HBT having an emitter of 2 × 20 μm, increases of a base leakage current have been observed when an ESD of around 100 V is applied through a base-emitter junction. Furthermore, increases of a collector leakage current have been observed with the additional ESD of around 150 V. Since no fatal effects for the transistor amplification are found in the high current region, the degradations are concluded to be responsible to the local damages of the base layer at the edge of base-emitter junction. Applying the Wunsch-Bell model to the damaged region, the temperature is estimated to be in a range from 400 to 550°C. It is thought that thermal destruction occurs in a base layer.
[1]
H. Fukui,et al.
Long-term and instantaneous burnout in GaAs power FET's: Mechanisms and solutions
,
1981,
IEEE Transactions on Electron Devices.
[2]
Y. Ota,et al.
AlGaAs/GaAs HBT with GaInAs cap layer fabricated by multiple-self-alignment process using one mask
,
1989
.
[3]
松下電器産業株式会社.
National technical report
,
1955
.
[4]
Juin J. Liou,et al.
A semi-numerical model for multi-emitter finger AlGaAs/GaAs HBTs
,
1994
.
[5]
K. Eda,et al.
AlGaAs/GaAs heterojunction bipolar transistors with small size fabricated by a multiple self-alignment process using one mask
,
1987,
IEEE Transactions on Electron Devices.
[6]
S. M. Sze,et al.
Physics of semiconductor devices
,
1969
.
[7]
R. Brown,et al.
Low Dose Ionization-Induced Failures in Active Bipolar Transistors
,
1968
.