The Contribution of Terrestrial Laser Scanning to the Analysis of Cliff Slope Stability in Sugano (Central Italy)

In this work, we describe a comprehensive approach aimed at assessing the slope stability conditions of a tuff cliff located below the village of Sugano (Central Italy) starting from remote geomechanical analysis on high-resolution 3D point clouds collected by terrestrial laser scanner (TLS) surveys. Firstly, the identification of the main joint systems has been made through both manual and automatic analyses on the 3D slope model resulting from the surveys. Afterwards, the identified joint sets were considered to evaluate the slope stability conditions by attributing safety factor (SF) values to the typical rock blocks whose kinematic was proved as compatible with tests for toppling under two independent triggering conditions: hydrostatic water pressure within the joints and seismic action. The results from the remote investigation of the cliff slope provide geometrical information of the blocks more susceptible to instability and pointed out that limit equilibrium condition can be achieved for potential triggering scenarios in the whole outcropping slope.

[1]  Claudio Margottini.  Low Environmental Impact Consolidation Works in the Rock Cliff of Civita di Bagnoregio (Central Italy) , 2013 .

[2]  A. Abellán,et al.  Detection and spatial prediction of rockfalls by means of terrestrial laser scanner monitoring , 2010 .

[3]  Robin Fell,et al.  A framework for landslide risk assessment and management , 2005 .

[4]  Francesca Bozzano,et al.  Assetto geologico ed evoluzione per frana di rupi vulcaniche nel lazio settentrionale , 2005 .

[5]  H. Hack,et al.  Automated identification and characterisation of discontinuity sets in outcropping rock masses using 3D terrestrial laser scan survey techniques , 2004 .

[6]  D. Varnes,et al.  Landslide types and processes , 2004 .

[7]  P. George,et al.  Delaunay mesh generation governed by metric specifications. Part I algorithms , 1997 .

[8]  S. Martino,et al.  Stress–strain history from the geological evolution of the Orvieto and Radicofani cliff slopes (Italy) , 2008 .

[9]  Allen W. Hatheway,et al.  The Complete ISRM Suggested Methods for Rock Characterization, Testing and Monitoring; 1974–2006 , 2009 .

[10]  David M. Cruden,et al.  LANDSLIDES: INVESTIGATION AND MITIGATION. CHAPTER 3 - LANDSLIDE TYPES AND PROCESSES , 1996 .

[11]  Hui Hu,et al.  Combined methodology for three-dimensional slope stability analysis coupled with time effect: a case study in Germany , 2018, Environmental Earth Sciences.

[12]  J. Keaton.  Rock Slope Engineering: Civil and Mining, 4th Edition , 2007 .

[13]  Corrado Cencetti,et al.  The Rock of Orvieto (Umbria, Central Italy) , 2005 .

[14]  P. Tarolli,et al.  Open-pit mine geomorphic changes analysis using multi-temporal UAV survey , 2018, Environmental Earth Sciences.

[15]  Derek D. Lichti,et al.  Ground-based Laser Scanners: Operation, systems and Applications , 2002 .

[16]  Norbert Pfeifer,et al.  Applying Terrestrial Laser Scanning for Soil Surface Roughness Assessment , 2015, Remote. Sens..

[17]  Antonella Marsico,et al.  Some results of coastal defences monitoring by ground laser scanning technology , 2012, Environmental Earth Sciences.

[18]  Erik Eberhardt,et al.  The use of LiDAR to overcome rock slope hazard data collection challenges at Afternoon Creek, Washington , 2006 .

[19]  G. Nappi,et al.  Post-Congress P 09 32 nd INTERNATIONAL GEOLOGICAL CONGRESS IGNIMBRITIC DEPOSITS IN CENTRAL ITALY : PYROCLASTIC PRODUCTS OF THE QUATERNARY AGE AND ETRUSCAN FOOTPATHS , 2004 .

[20]  Biswajeet Pradhan,et al.  Geostructural stability assessment of cave using rock surface discontinuity extracted from terrestrial laser scanning point cloud , 2018, Journal of Rock Mechanics and Geotechnical Engineering.

[21]  L. Dorren.  A review of rockfall mechanics and modelling approaches , 2003 .

[22]  Jonathan Richard Shewchuk,et al.  Triangle: Engineering a 2D Quality Mesh Generator and Delaunay Triangulator , 1996, WACG.

[23]  A. Barsi,et al.  Slope stability and rockfall assessment of volcanic tuffs using RPAS with 2-D FEM slope modelling , 2018 .

[24]  P. Mazzanti,et al.  Integrating geomechanical surveys and remote sensing for sea cliff slope stability analysis: the Mt. Pucci case study (Italy) , 2014 .

[25]  Alberto Renzulli,et al.  Geological evolution and geochronology of the Vulsini volcanic district (central Italy) , 1995 .