Hydrogen production by methanol steam reforming in a disc microreactor with tree-shaped flow architectures

Abstract A disc microreactor with constructal tree-shaped flow architecture is introduced for methanol steam reforming. For this design, a three-dimensional model is developed and analyzed numerically to predict the resulting hydrogen production. The methanol conversion ratio, yield of hydrogen production in the product of the tree-shaped microreactor, are all evaluated and compared with the corresponding microreactor using a parallel flow pattern. In addition, the effect of branching level, steam to methanol ratio (SMR), and inlet velocity on the reaction performance of the microreactor with a constructal tree-shaped network are also investigated and discussed. The results indicate that the methanol conversion in the disc tree-shaped microreactor is more than 10% better than that of a parallel microreactor. Furthermore, the yield of hydrogen at the outlet of the disc tree-shaped microreator is greater than the parallel flow configuration. The CO concentration in the products of the disc tree-shaped microreactor is higher than that of parallel microreactor. In addition, the disc tree-shaped microreactor with a larger branch level behaves enhanced performance on the methanol conversion and hydrogen production.

[1]  Volker Hessel,et al.  Sustainability through green processing – novel process windows intensify micro and milli process technologies , 2008 .

[2]  Yongping Yang,et al.  Numerical simulation of configuration and catalyst-layer effects on micro-channel steam reforming of methanol , 2011 .

[3]  Yongping Chen,et al.  Thermal and hydrodynamic characteristics of constructal tree‐shaped minichannel heat sink , 2009 .

[4]  Kwang Ho Song,et al.  Development of the integrated methanol fuel processor using micro-channel patterned devices and its performance for steam reforming of methanol , 2007 .

[5]  M. Kothare,et al.  A microreactor for hydrogen production in micro fuel cell applications , 2004, Journal of Microelectromechanical Systems.

[6]  Dimos Poulikakos,et al.  Tree network channels as fluid distributors constructing double-staircase polymer electrolyte fuel cells , 2004 .

[7]  C. Grigoropoulos,et al.  A study of steam methanol reforming in a microreactor , 2007 .

[8]  M. Flytzani-Stephanopoulos,et al.  Active gold species on cerium oxide nanoshapes for methanol steam reforming and the water gas shift reactions , 2010 .

[9]  Zhengdong Wang,et al.  Development of a microchannel reactor concerning steam reforming of methanol , 2006 .

[10]  J. Dumesic,et al.  Hydrogen from catalytic reforming of biomass-derived hydrocarbons in liquid water , 2002, Nature.

[11]  Luke M. Neal,et al.  Steam reforming of methanol using Cu-ZnO catalysts supported on nanoparticle alumina , 2008 .

[12]  M. Akbari,et al.  Methanol steam reforming in a planar wash coated microreactor integrated with a micro-combustor , 2011 .

[13]  M. Krumpelt,et al.  Hydrogen from hydrocarbon fuels for fuel cells , 2001 .

[14]  C. Grigoropoulos,et al.  Transport phenomena in a steam-methanol reforming microreactor with internal heating , 2009 .

[15]  M. Mrad,et al.  Cu/Zn-based catalysts for H2 production via steam reforming of methanol , 2011 .

[16]  Robert Schlögl,et al.  CO Formation/Selectivity for steam reforming of methanol with a commercial CuO/ZnO/Al2O3 catalyst , 2004 .

[17]  Brant A. Peppley,et al.  Methanol–steam reforming on Cu/ZnO/Al2O3. Part 1: the reaction network , 1999 .

[18]  Adrian Bejan,et al.  Constructal design for cooling a disc-shaped area by conduction , 2002 .

[19]  Adrian Bejan,et al.  Optimal tree-shaped networks for fluid flow in a disc-shaped body , 2002 .

[20]  R. Wu,et al.  Flow boiling in constructal tree-shaped minichannel network , 2011 .

[21]  Brant A. Peppley,et al.  Hydrogen production by steam reforming of methanol for polymer electrolyte fuel cells , 1994 .

[22]  Rufino M. Navarro,et al.  Hydrogen production from renewable sources: biomass and photocatalytic opportunities , 2009 .

[23]  Zhong Chen,et al.  Mechanistic investigations of photo-driven processes over TiO2 by in-situ DRIFTS-MS: Part 1. Platinization and methanol reforming , 2009 .

[24]  Jianli Hu,et al.  An overview of hydrogen production technologies , 2009 .

[25]  Akira Igarashi,et al.  A miniaturized methanol reformer with Si-based microreactor for a small PEMFC , 2006 .

[26]  A. Bejan,et al.  Constructal flow structure for a PEM fuel cell , 2004 .

[27]  Chin‐Hsiang Cheng,et al.  The effects of geometric and operating conditions on the hydrogen production performance of a micro-methanol steam reformer , 2010 .

[28]  Ali Fazeli,et al.  Hydrogen production in a zigzag and straight catalytic wall coated micro channel reactor by CFD modeling , 2010 .

[29]  Pierre Neveu,et al.  Constructal method to optimize solar thermochemical reactor design , 2010 .

[30]  Robert A Dagle,et al.  Methanol steam reforming for hydrogen production. , 2007, Chemical reviews.

[31]  C. D. Murray.  THE PHYSIOLOGICAL PRINCIPLE OF MINIMUM WORK APPLIED TO THE ANGLE OF BRANCHING OF ARTERIES , 1926, The Journal of general physiology.

[32]  Miao Qian,et al.  A micro-reactor with micro-pin-fin arrays for hydrogen production via methanol steam reforming , 2012 .

[33]  P. Fornasiero,et al.  NixCuy/Al2O3 based catalysts for hydrogen production , 2008 .

[34]  P. Cheng,et al.  Heat transfer and pressure drop in fractal tree-like microchannel nets , 2002 .

[35]  R. Wu,et al.  Methanol steam reforming in microreactor with constructal tree-shaped network , 2011 .

[36]  A. Bejan.  Shape and Structure, from Engineering to Nature , 2000 .

[37]  H. Merk.  The macroscopic equations for simultaneous heat and mass transfer in isotropic, continuous and closed systems , 1959 .

[38]  Adrian Bejan,et al.  Tree-Shaped Flow Architectures: Strategies for Increasing Optimization Speed and Accuracy , 2005 .

[39]  C. Grigoropoulos,et al.  Transport in packed-bed and wall-coated steam-methanol reformers , 2007 .

[40]  Y. Azoumah,et al.  Constructal design combined with entropy generation minimization for solid–gas reactors☆ , 2006 .

[41]  A. Bejan.  Constructal-theory network of conducting paths for cooling a heat generating volume , 1997 .

[42]  Julian R.H. Ross,et al.  Methanol reforming for fuel-cell applications: development of zirconia-containing Cu–Zn–Al catalysts , 1999 .

[43]  Sang Shin Park,et al.  Micro-channel reactor for steam reforming of methanol , 2007 .