Monitoring Internal Displacements of a Model Dam Using FBG Sensing Bars

Conventional instrumentation has difficulty to measure displacements inside laboratory-scale physical models. In this paper, an innovative fiber Bragg grating (FBG) sensing bar has been developed to perform high-accuracy and real-time monitoring of internal displacements. According to Euler-Bernoulli beam theory, the strain distribution measured by the quasi-distributed FBG sensors adhered on the bar surface can be used to compute the displacement profile along the sensing bar. The effectiveness of the FBG sensing bar has been verified by calibration tests. In the physical model of the Wudu gravity dam, two FBG sensing bars developed by the authors were installed, together with linear variable displacement transformers (LVDTs) and strain rosettes. The FBG sensing bars successfully captured the variation of internal displacement profiles in the model dam. The monitoring results during the overloading test were presented, based on which the deformation mechanism of the dam-foundation system is explained in details. The displacements measured by the FBG sensing bars are validated by their good agreements with those from LVDTs.

[1]  J. Bokor,et al.  Bragg gratings fabricated in monomode photosensitive optical fiber by UV exposure through a phase mask , 1993 .

[2]  Pierre Léger,et al.  Seismic Behavior of Post-Tensioned Gravity Dams: Shake Table Experiments and Numerical Simulations , 2002 .

[3]  Michael A. Davis,et al.  Fiber grating sensors , 1997 .

[4]  Victor E. Saouma,et al.  Centrifuge Modeling and Analysis of Concrete Gravity Dams , 1995 .

[5]  Mark W. Lin,et al.  Structural Deflection Monitoring Using an Embedded ETDR Distributed Strain Sensor , 2006 .

[6]  Nam-Sik Kim,et al.  Estimating deflection of a simple beam model using fiber optic bragg-grating sensors , 2004 .

[7]  Xia-Ting Feng,et al.  Stability assessment of the Three-Gorges Dam foundation, China, using physical and numerical modeling—Part I: physical model tests , 2003 .

[8]  John Dunnicliff,et al.  Geotechnical Instrumentation for Monitoring Field Performance , 1988 .

[9]  Ahmed Ghobarah,et al.  Experimental Study of Small Scale Dam Models , 1998 .

[10]  Daniele Inaudi,et al.  Structural monitoring by curvature analysis using interferometric fiber optic sensors , 1998 .

[11]  Sang-Hoon Kim,et al.  Application of Optical Fiber Sensors to Smart Structure , 2003 .

[12]  Pierre Léger,et al.  Seismic Safety of Gravity Dams: From Shake Table Experiments to Numerical Analyses , 2000 .

[13]  David Chapman,et al.  An Optical Fiber Sensor System for Remote Displacement Monitoring of Structures — Prototype Tests in the Laboratory , 2008 .

[14]  Lyesse Laloui,et al.  AN IMPROVED VOLUME MEASUREMENT FOR DETERMINING SOIL WATER RETENTION CURVES , 2007 .

[15]  Yasushi Sasaki,et al.  Study of a Displacement Measurement Method Inside a Small-Sized Model Ground in Laboratory Test , 2007 .

[16]  Fabrizio Barpi,et al.  Lifetime of concrete dam models under constant loads , 1999 .

[17]  K. Hill,et al.  Photosensitivity in optical fiber waveguides: Application to reflection filter fabrication , 1978 .