RETRACTED: Energy recovery data characteristics extraction of flywheel energy storage control system for vehicular applications

Flywheel energy storage system seems to be especially well suited to hybrid powertrain, which allows regenerative braking and power augmentation during acceleration in automotive vehicles. This article presents a novel electrical flywheel hybrid system through the analysis of the dynamic response of energy recovery process and the transmission characteristics of flywheel energy storage system. The power transmission process and energy flow of the vehicle with flywheel energy storage system were elaborated during braking. Energy recovery performance evaluation indexes were put forward, and the energy conversion characteristic test was conducted by experimental rig. The experimental result shows that the use of low-power motor speed control for gear ring can reduce the degree of jerk of transmission powertrain during energy recovery process and improve the energy recovery rate, and the net energy recovery rate tends to a stable value of 33%. The research extracts some features for flywheel energy storage control system and provides a theoretical basis for the further vehicular applications research.

[1]  Keith Robert Pullen,et al.  Kinetic energy storage for vehicles , 2006 .

[2]  James G R Hansen,et al.  An Assessment of Flywheel High Power Energy Storage Technology for Hybrid Vehicles , 2011 .

[3]  Yuanjin Yu,et al.  RETRACTED: A semi-physical simulation platform of attitude determination and control system for satellite , 2016 .

[4]  Huijun Gao,et al.  Saturated Adaptive Robust Control for Active Suspension Systems , 2013, IEEE Transactions on Industrial Electronics.

[5]  MengChu Zhou,et al.  A Chance Constrained Programming Approach to Determine the Optimal Disassembly Sequence , 2013, IEEE Transactions on Automation Science and Engineering.

[6]  Massimo Ceraolo,et al.  Comparison of SC and high-power batteries for use in hybrid vehicles , 2009 .

[7]  Zongxia Jiao,et al.  Extended-State-Observer-Based Output Feedback Nonlinear Robust Control of Hydraulic Systems With Backstepping , 2014, IEEE Transactions on Industrial Electronics.

[8]  Thomas Christen,et al.  Theory of Ragone plots , 2000 .

[9]  Mehrdad Ehsani,et al.  Investigation of the Effectiveness of Regenerative Braking for EV and HEV , 1999 .

[10]  Huann-Keng Chiang,et al.  RETRACTED: Robust variable air speed control of a nonlinear fan system based on backstepping sliding mode control techniques , 2016 .

[11]  N. Omar,et al.  Assessment of lithium-ion capacitor for using in battery electric vehicle and hybrid electric vehicle applications , 2012 .

[12]  Shuhan Wang,et al.  RETRACTED: Generic control flow for the four types of clutch-to-clutch shifts , 2016 .

[13]  Maarten Steinbuch,et al.  Optimal Control of a Mechanical Hybrid Powertrain With Cold-Start Conditions , 2014, IEEE Transactions on Vehicular Technology.

[14]  Ahmet Teke,et al.  A comprehensive overview of hybrid electric vehicle: Powertrain configurations, powertrain control techniques and electronic control units , 2011 .

[15]  Guizhou Ren,et al.  Review of electrical energy storage system for vehicular applications , 2015 .

[16]  J. Newman,et al.  Modeling the Performance of Lithium-Ion Batteries and Capacitors during Hybrid-Electric-Vehicle Operation , 2008 .

[17]  Jenn-Kun Kuo,et al.  Research of Flywheel System Energy Harvesting Technology for Fuel Cell Hybrid Vehicles , 2013 .

[18]  Liang Yan,et al.  High-Accuracy Tracking Control of Hydraulic Rotary Actuators With Modeling Uncertainties , 2014, IEEE/ASME Transactions on Mechatronics.

[19]  Bin Yao,et al.  Accurate Motion Control of Linear Motors With Adaptive Robust Compensation of Nonlinear Electromagnetic Field Effect , 2013, IEEE/ASME Transactions on Mechatronics.

[20]  Kevin Cullinane,et al.  Cutting vehicle emissions with regenerative braking. , 2010 .

[21]  Yu Tang,et al.  RETRACTED: Jacobian free monotonic descent algorithm for forward kinematics of spatial parallel manipulator , 2016 .

[22]  Christopher M Wolverton,et al.  Electrical energy storage for transportation—approaching the limits of, and going beyond, lithium-ion batteries , 2012 .

[23]  Azah Mohamed,et al.  Hybrid electric vehicles and their challenges: A review , 2014 .

[24]  Guangdong Tian,et al.  Technology innovation system and its integrated structure for automotive components remanufacturing industry development in China , 2014 .

[25]  Huijun Gao,et al.  Active Suspension Control With Frequency Band Constraints and Actuator Input Delay , 2012, IEEE Transactions on Industrial Electronics.

[26]  Ya-Jun Pan,et al.  Integrated adaptive robust control for multilateral teleoperation systems under arbitrary time delays , 2016 .

[27]  Bo Fang,et al.  RETRACTED: Suppression of panel flutter of near-space aircraft based on non-probabilistic reliability theory , 2016 .

[28]  Wei Xue,et al.  Active Disturbance Rejection Control for a Flywheel Energy Storage System , 2015, IEEE Transactions on Industrial Electronics.

[29]  Maarten Steinbuch,et al.  Fast and Smooth Clutch Engagement Control for a Mechanical Hybrid Powertrain , 2014, IEEE Transactions on Control Systems Technology.

[30]  Xiaosong Hu,et al.  Comparison of Three Electrochemical Energy Buffers Applied to a Hybrid Bus Powertrain With Simultaneous Optimal Sizing and Energy Management , 2014, IEEE Transactions on Intelligent Transportation Systems.

[31]  Qiang Wang,et al.  RETRACTED: Double speed loops control for high-precision position tracking of position-controlled actuators involving a harmonic drive reducer , 2016 .